EN ISO 4043-2016 en Simultaneous interpreting - Mobile booths - Requirements《可移动的同声翻译间，一般特性和设备》.pdf

《EN ISO 4043-2016 en Simultaneous interpreting - Mobile booths - Requirements《可移动的同声翻译间，一般特性和设备》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 4043-2016 en Simultaneous interpreting - Mobile booths - Requirements《可移动的同声翻译间，一般特性和设备》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO 4043:2016Simultaneous interpreting Mobile booths Requirements(ISO 4043:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 4043:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 4043:2016.The UK partic

2、ipation in its preparation was entrusted to Technical Committee TS/1, Terminology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its c

3、orrect application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 89895 2 ICS 91.040.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and

4、Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 4043 December 2016 ICS 91.040.10 English Version Simultaneous interpreting - Mobile booths - Requirements (ISO 4043:2016) Interprta

5、tion simultane - Cabines transportables - Exigences (ISO 4043:2016) Simultandolmetschen - Mobile Kabinen - Anforderungen (ISO 4043:2016) This European Standard was approved by CEN on 12 November 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condi

6、tions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists

7、 in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national stand

8、ards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slo

9、venia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserve

10、d worldwide for CEN national Members. Ref. No. EN ISO 4043:2016 EBS EN ISO 4043:2016EN ISO 4043:2016 (E) 3 European foreword This document (EN ISO 4043:2016) has been prepared by Technical Committee ISO/TC 37 “Terminology and other language and content resources“. This European Standard shall be giv

11、en the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest by June 2017. Attention is drawn to the possibility that some of the elements of this document may be th

12、e subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgi

13、um, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer

14、land, Turkey and the United Kingdom. Endorsement notice The text of ISO 4043:2016 has been approved by CEN as EN ISO 4043:2016 without any modification. BS EN ISO 4043:2016ISO 4043:2016(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 General requirements .

15、25 Size, weight and handling 25.1 Size of booths . 25.2 Weight of each component . 45.3 Transport and storage 46 Doors . 47 Cable passages 58 Windows 59 Acoustics . 59.1 Sound insulation 59.2 Sound absorption 610 Ventilation . 611 Working surface 612 Lighting . 713 Electricity supply 714 Language pa

16、nels 7Annex A (normative) Requirements for the use and siting of mobile booths . 8Bibliography .11 ISO 2016 All rights reserved iiiContents PageBS EN ISO 4043:2016ISO 4043:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (

17、ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, go

18、vernmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maint

19、enance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Atten

20、tion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction

21、 and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformit

22、y assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 37, Terminology and other language and conten

23、t resources, Subcommittee SC 5, Translation, interpreting and related technology.This third edition cancels and replaces the second edition (ISO 4043:1998), which has been technically revised.iv ISO 2016 All rights reservedBS EN ISO 4043:2016ISO 4043:2016(E)IntroductionA number of basic aspects are

24、to be considered when designing and/or using mobile booths. As interpreting is an activity that requires high concentration, stress factors have to be avoided and the working environment accordingly has to meet the highest ergonomic standards and provide an environment that enables interpreters to c

25、arry out their work properly.The design of a mobile booth is governed by four overall principles:a) sound insulation, both from the noise transmitted from the booths environment to a booth andvice versa, and from noise passing from one booth to another;b) good visual communication between the interp

26、reters and the participants in the event;c) adequate working conditions for the interpreters, whose booths are their workplace, such as toenable them to sustain the intense effort of concentration required throughout the days work;d) the booth must be lightweight yet sturdy, easy to handle and assem

27、ble, and designed in such a waythat it can also be easily dismantled and maintained. ISO 2016 All rights reserved vBS EN ISO 4043:2016BS EN ISO 4043:2016Simultaneous interpreting Mobile booths Requirements1 ScopeThis document provides requirements and recommendations for the manufacturing of mobile

28、simultaneous interpreting booths. The main features of mobile booths that distinguish them from permanent simultaneous interpreting booths are that they can be dismantled, moved and set up in a conference room not equipped with permanent booths. This document also ensures the usability and accessibi

29、lity of booths for all interpreters, including those with special needs.Requirements for the use and siting of mobile booths are described in Annex A.In conjunction with either ISO 2603 or this document, ISO 20108 and ISO 20109 provide the relevant requirements both for the quality and transmission

30、of sound and image provided to interpreters and for the equipment needed in the booths.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited app

31、lies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 1182, Reaction to fire tests for products Non-combustibility testISO 3382-1, Acoustics Measurement of room acoustic parameters Part 1: Performance spacesISO 3382-2, Acoustics Measuremen

32、t of room acoustic parameters Part 2: Reverberation time in ordinary roomsISO 8995-1, Lighting of work places Part 1: IndoorISO 11228-1, Ergonomics Manual handling Part 1: Lifting and carryingISO 11925-3, Reaction to fire tests Ignitability of building products subjected to direct impingement of fla

33、me Part 3: Multi-source testISO 16283-1, Acoustics Field measurement of sound insulation in buildings and of building elements Part 1: Airborne sound insulationISO 20108, Simultaneous interpreting Quality and transmission of sound and image input RequirementsISO 20109:2016, Simultaneous interpreting

34、 Equipment RequirementsISO 21542, Building construction Accessibility and usability of the built environment3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.ISO and IEC maintain terminological databases for use in standardization at the following ad

35、dresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obpINTERNATIONAL STANDARD ISO 4043:2016(E) ISO 2016 All rights reserved 1BS EN ISO 4043:2016ISO 4043:2016(E)3.1simultaneous interpretingmode of interpreting performed whil

36、e a speaker is still speaking or signingNote 1 to entry: The activity requires specialized equipment.3.2boothbooth for simultaneous interpretingself-contained unit enclosing the interpreters work spaceNote 1 to entry: One of the purposes of simultaneous interpreting booths is to provide sound insula

37、tion, both from the noise transmitted from the booths external environment to the booth itself and vice versa, and from noise passing from one booth to another.3.2.1permanent boothpermanent simultaneous interpreting boothbooth (3.2) structurally integrated into a facilityNote 1 to entry: ISO 2603 ap

38、plies to permanent booths.3.2.2mobile boothmobile simultaneous interpreting boothfree-standing booth (3.2) assembled from modular components, which can be transported and set up at a variety of facilities3.3video displayelectronic device that represents information in a visual form4 General requirem

39、entsMobile booths are designed for temporary use in a variety of locations. They shall provide at least the required sound insulation and sound absorption (see Clause 9). Booths shall be designed in such a way that they can be dismantled, maintained and re-used. Furthermore, the initial performance

40、of the sound insulation shall be guaranteed for use at least 100 times, and handling, assembling and dismantling shall not incur additional replacement costs.Materials used shall be easy to maintain, non-toxic, odourless, anti-static, fire-retardant or non-flammable according to ISO 1182 and ISO 119

41、25-3, and cause no irritation to eyes, skin or respiratory tract. They shall neither attract nor collect dust.The colour scheme in the booth shall be appropriate for the restricted working space (soft, light colours, subtle pastel shades). Matte finishes shall be used for all surfaces in the booth i

42、n order to avoid reflections.5 Size, weight and handling5.1 Size of boothsSee Figure 1 and Figure 2.Each booth shall accommodate the required number of interpreters comfortably seated side by side, while at the same time allowing them to enter and leave the booth without disturbing one another. Enou

43、gh space shall be provided to ensure adequate ventilation and temperature control.2 ISO 2016 All rights reservedBS EN ISO 4043:2016ISO 4043:2016(E)The following minimum internal dimensions shall apply:a) width: for no more than two interpreters 1,60 m; for no more than three interpreters 2,40 m; for

44、 no more than four interpreters 3,20 m;b) depth: 1,60 m;c) height: 2,00 m.The booths shall be modular and allow for the extension of a 1,60 m-wide booth to a 2,40 m-wide or 3,20 m-wide booth by adding panels.NOTE Table-mounted hoods and single-person booths do not comply with this document.Key1 air

45、extractor2 door panel (may be fitted at the back or side of the booth)3 working surfaceaFor two interpreters.bFor two or three interpreters.cFor up to four interpreters.Figure 1 Mobile booth for two, three or four interpreters ISO 2016 All rights reserved 3BS EN ISO 4043:2016ISO 4043:2016(E)Key1 sid

46、e window2 door (may be fitted at back or side of booth)aAir inlet.bAir outlet (extractor fan).Figure 2 Sideview of a mobile booth5.2 Weight of each componentAccording to ISO 11228-1, the weight of a single component of a mobile booth shall not exceed 25 kg and the booth shall be designed in such a w

47、ay that it can be assembled and dismantled by a single person.5.3 Transport and storageWhen not in use, the booths shall be transported and stored in a dry, non-smoking environment free of any odours.6 DoorsDoors are essential to ensure proper soundproofing. A booth shall have a hinged door that ope

48、ns outwards, and shall provide direct access from the conference room and platform. The door shall 4 ISO 2016 All rights reservedBS EN ISO 4043:2016ISO 4043:2016(E)operate silently without a lock, the handles shall be sturdy, and the threshold shall not exceed 2 cm. There should also be an observati

49、on port-hole in the door of no less than 20 cm 20 cm.The door should be located at the back or on one of the side walls of the booth.Appropriate accessibility for all people including persons with a disability shall be ensured in accordance with ISO 21542.Wheelchair access to the workplace may be regulated.7 Cable passagesWhere cable passages are necessary in the side or front panels of the booths, they should be no less than 5 cm 5 cm and no more than 10 cm 10 cm, and access to them should be