EN ISO 139-2005 en Textiles - Standard atmospheres for conditioning and testing (Incorporates Amendment A1 2011)《纺织品 调湿和试验用标准大气 ISO 139-2005 代替EN 20139-1992》.pdf

《EN ISO 139-2005 en Textiles - Standard atmospheres for conditioning and testing (Incorporates Amendment A1 2011)《纺织品 调湿和试验用标准大气 ISO 139-2005 代替EN 20139-1992》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 139-2005 en Textiles - Standard atmospheres for conditioning and testing (Incorporates Amendment A1 2011)《纺织品 调湿和试验用标准大气 ISO 139-2005 代替EN 20139-1992》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN ISO 139:2005Textiles Standard atmospheres for conditioning and testingICS 59.080.01g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g

2、36g58+A1:2011National forewordThis British Standard is the UK implementation of EN ISO 139:2005+A1:2011. It is identical to ISO 139:2005, incorporating amendment 1:2011. It supersedes BS EN ISO 139:2005, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated

3、in the text by tags. Tags indicating changes to ISO text carry the number of the ISO amendment. For example, text altered by ISO amendment 1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee TCI/24, Physical testing of textiles.A list of organizations re

4、presented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN IS

5、O 139:2005+A1:2011This British Standard waspublished under the authorityof the Standards Policy andStrategy Committee on10 February 2005 BSI 2011Amendments/corrigenda issued since publicationDate Comments 31 August 2011 Implementation of ISO amendment 1:2011 with CEN endorsement A1:2011ISBN 978 0 58

6、0 76423 3EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 139:2005+A1 July 2011ICS 59.080.01 Supersedes EN 20139:1992 English version Textiles - Standard atmospheres for conditioning and testing (ISO 139:2005) Textiles - Atmosphres normales de conditionnement et dessai (ISO 139:2005) Textili

7、en - Normalklimate fr die Probenvorbereitung und Prfung (ISO 139:2005) This European Standard was approved by CEN on 10 December 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national s

8、tandard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any othe

9、r language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fr

10、ance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUN

11、G Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 139:2005: EForeword This document (EN ISO 139:2005) has been prepared by Technical Committee ISO/TC 38 “Textiles“ in

12、collaboration with Technical Committee CEN/TC 248 “Textiles and textile products“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2005, and conflicti

13、ng national standards shall be withdrawn at the latest by July 2005. This document supersedes EN 20139:1992. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Cze

14、ch Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 139:2005 has been appr

15、oved by CEN as EN ISO 139:2005 without any modifications. Foreword to amendment A1 This document (EN ISO 139:2005/A1:2011) has been prepared by Technical Committee ISO/TC 38 “Textiles“ in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is he

16、ld by BSI. This Amendment to the European Standard EN ISO 139:2005 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withdrawn at the latest by January 2012. Atten

17、tion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of

18、the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Roman

19、ia, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 139:2005/AMD 1:2011 has been approved by CEN as a EN ISO 139:2005/A1:2011 without any modification. BS EN ISO 139:2005+A1:2011EN ISO 139:2005+A1:2011 (E)ceSdno deoitin25001-10-5Reference num

20、berISO 139:2005(E)Textiles Standard atmospheres for conditioning and testingTextiles Atmosphres normales de conditionnement et dessaiINTERNATIONALSTANDARDISO139Second edition2005-01-15Refecnern eumrebISO 193002:)E(5 OSI 2005txseli atSradnd taomehpsser for dnocoitining nat dnitsegTextilse mtAoshpren

21、sormalse ed cidnoitnnoemente t sedsaiii BS EN ISO 139:2005+A1:2011EN ISO 139:2005+A1:2011 (E)iiiContents Page1 Scope 12 Terms and definitions 13 Requirements . 24 Apparatus . 25 Procedures . 26 Test report 3Annex A (normative) Control of standard atmosphere . 4Annex B (informative) Tolerance zone 5B

22、ibliography . 6BS EN ISO 139:2005+A1:2011EN ISO 139:2005+A1:2011 (E)iv ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies(ISO member bodies). The work of preparing International Standards is normally carried out through ISOtechnica

23、l committees. Each member body interested in a subject for which a technical committee has beenestablished has the right to be represented on that committee. International organizations, governmental andnon-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with

24、the InternationalElectrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft Internatio

25、nal Standardsadopted by the technical committees are circulated to the member bodies for voting. Publication as anInternational Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the

26、subject of patentrights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 139 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 24, Conditioningatmospheres and physical tests for textile fabrics.This second edition cancels and replaces the fi

27、rst edition (ISO 139:1973), which has been technically revised,specifically by including the allowances for the uncertainty of the measurement in the overall tolerances fortemperature and relative humidity.BS EN ISO 139:2005+A1:2011EN ISO 139:2005+A1:2011 (E)vIntroductionThe tolerances for temperatu

28、re and relative humidity given in ISO 139:1973 were the tolerances for thetemperature and relative humidity measured in the laboratory, and without any consideration for the uncertaintyof measurement of the measuring devices being used.With the increased understanding since 1973 and the existence no

29、w of standards covering these issues (e.g.ISO 14253-1), it is now necessary to allow for the uncertainty of measurement when setting appropriatetolerances.This second edition of ISO 139 includes the allowance for uncertainty of measurement in the overall tolerancesfor temperature and relative humidi

30、ty.This means that although the tolerances for temperature and relative humidity appear more lenient than inISO 139:1973, in practice, the laboratory must still be controlled (measured temperature and humidity) toessentially the same level as stated in ISO 139:1973.BS EN ISO 139:2005+A1:2011EN ISO 1

31、39:2005+A1:2011 (E)blankBS EN ISO 139:2005+A1:2011EN ISO 139:2005+A1:2011 (E)1Textiles Standard atmospheres for conditioning and testing1ScopeThis International Standard defines the characteristics and use of a standard atmosphere for conditioning, fordetermining the physical and mechanical properti

32、es of textiles and a standard alternative atmosphere that maybe used if agreed between parties.2 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.2.1 standard atmosphereenvironment of controlled relative humidity and temperature in which textiles are

33、conditioned and tested2.2 relative humidityratio, expressed as a percentage, of the actual pressure of the water vapour in the atmosphere to the saturationvapour pressure at the same temperature and at the same pressure2.3 tolerancedifference between the upper and lower tolerance limitsISO 3534-22.4

34、 tolerance zonevariate values of the characteristics between and including the tolerance limitsISO 3534-22.5 tolerance limitsspecified values of the characteristic giving upper and/or lower bounds of the permissible valueISO 3534-22.6 uncertainty of measurementparameter, associated with the result o

35、f measurement, that characterizes the dispersion of the values that couldreasonably be attributed to the measurandNOTE Modified from VIM.2.7 resolution (of displaying device)smallest difference between indications of displaying that can be meaningfully distinguishedNOTE Modified from VIM.BS EN ISO 1

36、39:2005+A1:2011EN ISO 139:2005+A1:2011 (E)2 4 Apparatus4.1 Measuring devices for temperature and relative humidityMeasuring devices should meet the following requirements:Calibration to determine the uncertainties of the measurement sensors shall be carried out regularly.4.2 Limitations to measureme

37、nt devicesDevices used for the measurement of relative humidity and temperature in the conditioned atmosphere shall beseparate from those normally used for controlling heating, ventilation and air conditioning ducts.5 Procedures5.1 Reading frequency for continuous monitoringSensor readings of a cond

38、itioned atmospheric enclosure shall be made at such a frequency that any short-termout-of-tolerance-limit events can be detected (see Annex A for additional information).5.2 Spatial variationMore than one measuring devices might be required to ensure adequate monitoring of the atmosphericconditions

39、throughout the enclosure (see Annex A). resolution: for temperature, or better, and for relative humidity, or better; uncertainty of measurement: for temperature, or better, and for relative humidity, orbetter.0,1C 0,1 %0,5C 2,0 %!“2.8 rapid conditioning accelerated conditioning system that permits

40、specimens to reach equilibrium with the standard atmosphere for testing textiles at a significantly faster rate than if the specimens are exposed to the atmosphere in a static state BS EN ISO 139:2005+A1:2011EN ISO 139:2005+A1:2011 (E)3 Requirements 3.1 Standard atmosphere The standard atmosphere sh

41、all have a temperature of 20,0 C and a relative humidity of 65,0 %. 3.2 Alternative standard atmospheres The alternative, but not equivalent, atmosphere (3.2.1 or 3.2.2) may only be used if the parties involved agree on its use, and the alternative atmosphere used shall be reported.3.2.1 Specific st

42、andard atmosphere The specific standard atmosphere shall have a temperature of 23,0 C and a relative humidity of 50,0 %. 3.2.2 Tropical standard atmosphere The tropical standard atmosphere shall have a temperature of 27,0 C and a relative humidity of 65,0 %. 3.3 Tolerance zone for the standard atmos

43、phere and the alternative standard atmospheres The tolerance for temperature is 2,0 C. The tolerance for relative humidity is 4,0 %. NOTE For a control of standard atmospheres, see Annex A. 35.3 Pre-conditioningBefore conditioning a textile, pre-conditioning might be required. If so, the textile sha

44、ll be brought approximatelyto equilibrium in an atmosphere having a relative humidity of between and and a temperature notexceeding .5.4 ConditioningBefore a textile is tested, it shall be conditioned by placing it in the atmosphere for testing in such a way that theair flows freely through the text

45、ile, and keeping it there for the time required to bring it into equilibrium with theatmosphere.6 Test reportIf required, laboratory test reports shall include the following:a) identification of the test specimen;b) reference to this International Standard (ISO 139:2005);c) details of the atmosphere

46、 used for conditioning and testing;d) details of any deviation from this International Standard.10,0 % 25,0 %50,0CBS EN ISO 139:2005+A1:2011EN ISO 139:2005+A1:2011 (E)Unless otherwise specified, the textile should be considered to be in equilibrium when successive weighings show no progressive chang

47、e in mass greater than 0,25 %. In the case of the standard atmosphere in a conditioned laboratory, successive weighing should be done on the textile at intervals of 2 h. However, where accelerated conditioning systems are used, a shorter interval of 2 min to 10 min should be used. !“4 Annex A(normat

48、ive)Control of standard atmosphereA.1 GeneralAn air-conditioned laboratory shall provide and maintain a standard atmosphere as defined in 3.1 or 3.2, withinthe tolerance zone as defined in 3.3.The specified condition of temperature and relative humidity shall be considered to have been attained when

49、the following requirements are satisfied.a) The mean temperature and relative humidity over any continuous period shall conform to the tolerancezone at the standard atmosphere conditions.b) The spatial variation of the standard atmosphere shall comply with the specified tolerance zone.A.2 ApparatusApparatus shall be in accordance with the requirements of 4.1. A device such as a digital or electronic sensorwith a recorder output for continuous monitoring is suitable.A.3 ProcedureA.3.1 Spatial variationMonitor periodically the spatial varia