EN 62586-1-2014 en Power quality measurement in power supply systems - Part 1 Power quality instruments (PQI).pdf

《EN 62586-1-2014 en Power quality measurement in power supply systems - Part 1 Power quality instruments (PQI).pdf》由会员分享，可在线阅读，更多相关《EN 62586-1-2014 en Power quality measurement in power supply systems - Part 1 Power quality instruments (PQI).pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPower quality measurement in power supply systemsPart 1: Power quality instruments (PQI)BS EN 62586-1:2014National forewordThis British Standard is the UK implementation of EN 62586-1:2014. It isidentical to IEC 62586-1:2013.The UK participation in its preparation was entrus

2、ted to TechnicalCommittee PEL/85, Measuring equipment for electrical and electromagnetic quantities.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are respo

3、nsible for its correct application. The British Standards Institution 2014Published by BSI Standards Limited 2014ISBN 978 0 580 77128 6ICS 17.220.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards

4、Policy and Strategy Committee on 30 June 2014.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62586-1:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62586-1 June 2014 ICS 17.220.20 English Version Power quality measurement in power supply systems - Part

5、1: Power quality instruments (PQI) (IEC 62586-1:2013) Mesure de la qualit de lalimentation dans les rseaux dalimentation - Partie 1: Instruments de mesure de la qualit de lalimentation (CEI 62586-1:2013) Messung der Spannungsqualitt in Energieversorgungssystemen - Teil 1: Messgerte fr die Spannungsq

6、ualitt (IEC 62586-1:2013) This European Standard was approved by CENELEC on 2014-01-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date

7、lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translatio

8、n under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmar

9、k, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Com

10、mittee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CE

11、NELEC Members. Ref. No. EN 62586-1:2014 E BS EN 62586-1:2014EN 62586-1:2014 - 2 - Foreword The text of document 85/460/FDIS, future edition 1 of IEC 62586-1, prepared by IEC/TC 85 “Measuring equipment for electrical and electromagnetic quantities“ was submitted to the IEC-CENELEC parallel vote and a

12、pproved by CENELEC as EN 62586-1:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-12-20 latest date by which the national standards conflicting with the documen

13、t have to be withdrawn (dow) 2017-01-16 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandat

14、e given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For the relationship with EU Directive see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International St

15、andard IEC 62586-1:2013 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60359 NOTE Harmonized as EN 60359. IEC 61010 Series NOTE Harmonized as EN 61010 Series (pa

16、rtly modified). BS EN 62586-1:2014- 3 - EN 62586-1:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its appli

17、cation. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.

18、NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60068-1 - Environmental testing - Part 1: General and guidance EN 60068-1 - IEC 60068-2-1 - Environmental testing - Part 2-1: Te

19、sts - Test A: Cold EN 60068-2-1 - IEC 60068-2-2 - Environmental testing - Part 2-2: Tests - Test B: Dry heat EN 60068-2-2 - IEC 60068-2-6 - Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 - IEC 60068-2-14 - Environmental testing - Part 2-14: Tests - Test N: Cha

20、nge of temperature EN 60068-2-14 - IEC 60068-2-27 - Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock EN 60068-2-27 - IEC 60068-2-31 - Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens EN 60068-2-31 - IEC 60068-2-52

21、 - Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) EN 60068-2-52 - IEC 60068-2-57 - Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method EN 60068-2-57 - IEC 60068-2-78 - Environmental testing - Part 2-78: T

22、ests - Test Cab: Damp heat, steady state EN 60068-2-78 - IEC 60529 - Degrees of protection provided by enclosures (IP Code) EN 60529 - IEC 60654-1 - Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions EN 60654-1 - BS EN 62586-1:2014EN 62586-1:201

23、4 - 4 - Publication Year Title EN/HD Year IEC 60664-1 2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60664-1 2007 IEC 60721-3-1 - Classification of environmental conditions - Part 3: Classification of groups of environmental para

24、meters and their severities - Section 1: Storage EN 60721-3-1 - IEC 60721-3-2 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation EN 60721-3-2 - IEC 60721-3-3 - Classification of environmental co

25、nditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations EN 60721-3-3 - IEC 61000-4-7 +A1 2002 2008 Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harm

26、onics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto EN 61000-4-7 +A1 2002 2009 IEC 61000-4-15 2010 Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications

27、 EN 61000-4-15 2011 IEC 61000-4-30 2008 Electromagnetic compatibility (EMC) - Part 4-30 : Testing and measurement techniques - Power quality measurement methods EN 61000-4-30 2009 IEC/TS 61000-6-5 - Electromagnetic compatibilty (EMC) - Part 6-5: Generic standards - Immunity for power station and sub

28、station environments - - IEC 61010-1 2010 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements EN 61010-1 2010 IEC 61010-2-030 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-030: P

29、articular requirements for testing and measuring circuits EN 61010-2-030 - BS EN 62586-1:2014- 5 - EN 62586-1:2014 Publication Year Title EN/HD Year IEC 62262 - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) EN 62262 - IEC 62586-2

30、- Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements EN 62586-2 - CISPR 22 - Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement EN 55022 - BS EN 62586-1:2014EN 62586-1:2014 - 6 - Annex ZZ (in

31、formative) Coverage of Essential Requirements of EU Directives This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers protection requirements of Annex I Article 1 of the EU

32、Directive 2004/108/EC. Compliance with this standard provides one means of conformity with the specified essential requirements of the Directive concerned. WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. BS EN 62586-1:2

33、014 2 62586-1 IEC:2013 CONTENTS INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions, abbreviations, notations and symbols . 9 3.1 General definitions 9 3.2 Terms and definitions related to environments. 10 3.3 Definitions related to uncertainty . 10 3.4 Notations . 11 3.4.1

34、Functions 11 3.4.2 Symbols and abbreviations 11 3.4.3 Indices 12 4 Environmental conditions 12 4.1 General . 12 4.2 Environments FI1, FI2, FI1-H, FI2-H, FO and FO-H . 13 4.3 Environments PI, PI-H, PO and PO-H 14 4.4 Relationship between ambient air temperature and relative humidity . 15 5 Ratings .

35、15 5.1 Rated input energising voltages 15 5.2 Rated frequencies . 15 6 Design and construction . 15 6.1 General . 15 6.2 General architecture 15 6.3 Functions embedded in PQI-A and PQI-S 16 6.3.1 PQI-A minimum functions definition . 16 6.3.2 PQI-S minimum functions definition . 17 6.3.3 Summary of I

36、EC 61000-4-30 requirements for functions 17 6.4 Additional requirements complementary to IEC 61000-4-30 . 18 6.4.1 Data to be provided for testing reasons . 18 6.4.2 Resolution of the presented data . 20 6.4.3 Clarification about “data flagging” 20 6.4.4 Temperature drift requirement within the rate

37、d range of operation for ambient air temperature . 20 6.5 Safety requirements 21 6.6 EMC requirements . 22 6.6.1 Emissions 22 6.6.2 Immunity . 22 6.7 Climatic requirements of PQI . 22 6.8 Mechanical requirements . 22 6.8.1 Product mechanical robustness . 22 6.8.2 Enclosure robustness 22 6.9 Degree o

38、f protection by enclosures . 23 6.10 Start-up requirements 23 7 Marking and operating instructions . 23 7.1 General . 23 7.2 Marking . 23 BS EN 62586-1:201462586-1 IEC:2013 3 7.3 Operating instructions . 23 8 Functional, environmental and safety type tests . 24 8.1 General . 24 8.2 Reference conditi

39、ons for type tests . 24 8.3 Safety tests . 25 8.4 EMC tests . 25 8.4.1 Emissions 25 8.4.2 Immunity . 25 8.5 Climatic tests 26 8.6 Mechanical tests . 27 8.6.1 Product mechanical robustness . 27 8.6.2 Degree of protection provide by enclosures for electrical equipment against external mechanical impac

40、ts (IK code) 28 8.6.3 Degree of protection by enclosure (IP code) 28 8.7 Functional and uncertainty tests 28 9 Routine tests 28 9.1 General . 28 9.2 Protective bonding test 28 9.3 Dielectric strength test . 28 9.4 Intrinsic uncertainty test 28 10 Certificates and declarations 28 11 Re-calibration an

41、d re-verification 28 Annex A (informative) Information about environment H and G described in IEC/TS 61000-6-5 . 29 Bibliography 30 Figure 1 Instrument generic measurement chain 16 Figure 2 Uncertainty requirement as a function of temperature 21 Figure A.1 Example of power station and substation: se

42、lection of the specification for apparatus and the related connections 29 Table 1 Products coding table 12 Table 2 Definition of class A products 12 Table 3 Definition of class S products 13 Table 4 Description of FI1, FI2, FI1-H, FI2-H, FO, FO-H environments 13 Table 5 Description of PI, PI-H, PO a

43、nd PO-H environments 14 Table 6 PQI-A functions . 16 Table 7 PQI-S minimum functions 17 Table 8 Summary of measurements requested for testing 19 Table 9 Uncertainty multipliers for different temperature ranges . 21 Table 10 Enclosure mechanical requirements 22 Table 11 Minimum IP requirements 23 Tab

44、le 12 Characteristics specification template 24 Table 13 Reference conditions for testing 25 Table 14 Climatic requirements 26 Table 15 Product mechanical requirements 27 BS EN 62586-1:2014 6 62586-1 IEC:2013 INTRODUCTION Electricity as delivered to the network users has several characteristics whic

45、h are variable and which affect its usefulness to the network user. Power quality instruments on the market have different characteristics. This standard provides a common system of references in order to facilitate their selection, comparison and evaluation. This standard specifies a classification

46、 based on product performances, environment and safety. It is acknowledged that IEC 61000-4-30 is a basic EMC publication. Detailed guidance on instrument performance, performance verification methods, additional influence quantities and other similar information should, in general, be found in a pr

47、oduct standard. IEC 62586-1 is a product standard that refers to IEC 61000-4-30, IEC 61000-4-7 and IEC 61000-4-15 for measuring methods. IEC 62586-2 specifies functional tests and uncertainty requirements for instruments in the scope of IEC 62586-1. IEC 62586-1 is therefore complementing basic EMC s

48、tandards with environmental, safety and performance requirements. BS EN 62586-1:201462586-1 IEC:2013 7 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS Part 1: Power quality instruments (PQI) 1 Scope This part of IEC 62586 specifies product and performance requirements for instruments whose functio

49、ns include measuring, recording and possibly monitoring power quality parameters in power supply systems, and whose measuring methods (class A or class S) are defined in IEC 61000-4-30. These requirements are applicable in single, dual- (split phase) and 3-phase a.c. power supply systems at 50 Hz or 60 Hz. These instruments can be used: in the generation, transmission and distribution of electricity, for example inside a power station, substation or