EN 62453-306-2009 en Field device tool (FDT) interface specification - Part 306 Communication profile integration - IEC 61784 CPF 6《现场装置工具(FDT)接口规范 第306部分 通讯剖面综合 IEC 61784 CPF 6》.pdf

《EN 62453-306-2009 en Field device tool (FDT) interface specification - Part 306 Communication profile integration - IEC 61784 CPF 6《现场装置工具(FDT)接口规范 第306部分 通讯剖面综合 IEC 61784 CPF 6》.pdf》由会员分享，可在线阅读，更多相关《EN 62453-306-2009 en Field device tool (FDT) interface specification - Part 306 Communication profile integration - IEC 61784 CPF 6《现场装置工具(FDT)接口规范 第306部分 通讯剖面综合 IEC 61784 CPF 6》.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interfacespecification Part 306: Communication profile integration IEC 61784 CPF 6BS EN 62453-306:2009National forewordThis British Standard is the UK imp

2、lementation of EN 62453-306:2009. It isidentical to IEC 62453-306:2009.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communications: process measurement and control, including fieldbus.A list of organizations represented on this committee can be obtain

3、ed onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 62564 0ICS 25.040.40; 35.100.05; 35.110Compliance with a British Standard cannot confer immunity fromlegal o

4、bligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62453-306:2009EUROPEAN STANDARD EN 62453-306 NORME EUROPENNE EUROPISCHE NORM October

5、2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserv

6、ed worldwide for CENELEC members. Ref. No. EN 62453-306:2009 E ICS 25.040.40; 35.100.05; 35.110 English version Field device tool (FDT) interface specification - Part 306: Communication profile integration - IEC 61784 CPF 6 (IEC 62453-306:2009) Spcification des interfaces des outils des dispositifs

7、de terrain (FDT) - Partie 306: Intgration des profils de communication - CEI 61784 CPF 6 (CEI 62453-306:2009) Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 306: Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 6 nach IEC 61784 (IEC 62453-306:2009) This European

8、 Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references co

9、ncerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member in

10、to its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irel

11、and, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62453-306:2009EN 62453-306:2009 - 2 - Foreword The text of document 65E/129/FDIS, future edition 1 of IEC 62453-306, prep

12、ared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-306 on 2009-08-01. Each part of the EN 62453-3xy series is intended to be read i

13、n conjunction with EN 62453-2. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-05-01 latest date by which the national standards conflicting with the EN have to be withdr

14、awn (dow) 2012-08-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62453-306:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the stand

15、ard indicated: IEC 61158 NOTE Harmonized in EN 61158 series (not modified). _ BS EN 62453-306:2009- 3 - EN 62453-306:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for th

16、e application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the re

17、levant EN/HD applies. Publication Year Title EN/HD Year IEC 61158-2 1)Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition EN 61158-2 20082)IEC 61158-3-8 1)Industrial communication networks - Fieldbus specifications - Part 3-8: Dat

18、a-link layer service definition - Type 8 elements EN 61158-3-8 20082)IEC 61158-4-8 1)Industrial communication networks - Fieldbus specifications - Part 4-8: Data-link layer protocol specification - Type 8 elements EN 61158-4-8 20082)IEC 61158-5-8 1)Industrial communication networks - Fieldbus specif

19、ications - Part 5-8: Application layer service definition - Type 8 elements EN 61158-5-8 20082)IEC 61158-6-8 1)Industrial communication networks - Fieldbus specifications - Part 6-8: Application layer protocol specification - Type 8 elements EN 61158-6-8 20082)IEC 61784-1 1)Industrial communication

20、networks - Profiles - Part 1: Fieldbus profiles EN 61784-1 20082)IEC 62453-1 2009 Field device tool (FDT) interface specification - Part 1: Overview and guidance EN 62453-1 2009 IEC 62453-2 2009 Field device tool (FDT) interface specification - Part 2: Concepts and detailed description EN 62453-2 20

21、09 1)Undated reference. 2)Valid edition at date of issue. BS EN 62453-306:2009 2 62453-306 IEC:2009(E) CONTENTS INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Terms, definitions, symbols, abbreviated terms and conventions 8 3.1 Terms and definitions 8 3.2 Symbols and abbreviated terms.8 3.3 Co

22、nventions 8 3.3.1 Data type names and references to data types 8 3.3.2 Vocabulary for requirements8 3.3.3 Use of UML .8 4 Bus category 8 5 Access to instance and device data9 5.1 Process Channel objects provided by DTM9 5.2 DTM services to access instance and device data .9 6 Protocol specific behav

23、ior.9 7 Protocol specific usage of general data types.9 8 Protocol specific common data types10 9 Network management data types10 9.1 Parameter access data types 10 9.2 Parameter for boot sequence 11 10 Communication data types .11 11 Channel parameter data types14 12 Device identification .17 12.1

24、Protocol specific handling of data type STRING 17 12.2 Device type identification data types .17 12.3 Topology scan data types21 12.4 Scan identification data types22 12.5 Device type identification data types .25 Bibliography28 Figure 1 Part 306 of the IEC 62453 series .6 Table 1 Protocol identifie

25、r 8 Table 2 Physical layer identifier .9 Table 3 Protocol specific usage of general data types9 Table 4 Simple parameter access data types .10 Table 5 Structured parameter access data types11 Table 6 Simple communication data types .11 Table 7 Structured communication data types12 Table 8 Simple cha

26、nnel parameter data types15 Table 9 Structured channel parameter data types 16 Table 10 Identification data types for simple IEC 61784 CPF 6 device .18 BS EN 62453-306:200962453-306 IEC:2009(E) 3 Table 11 Identification data types for IEC 61784 CPF 6 PCP device 19 Table 12 Identification data types

27、for IEC 61784 CPF 6 base profile device .20 Table 13 Simple identification data types with protocol independent semantics21 Table 14 Structured identification data types with protocol independent semantics 21 Table 15 Simple device type identification data types 21 Table 16 Structured device type id

28、entification data type.22 Table 17 Simple scan identification data types.22 Table 18 Structured scan identification data types .23 Table 19 Simple device type identification data types 25 Table 20 Structured device type identification data types .25 BS EN 62453-306:2009 6 62453-306 IEC:2009(E) INTRO

29、DUCTION This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool) components for function control and data access within a client/server architecture. The specification is a result of an analysis and design process to develop standard interfaces to facilitate the

30、 development of servers and clients by multiple vendors that need to interoperate seamlessly. With the integration of fieldbusses into control systems, there are a few other tasks which need to be performed. In addition to fieldbus- and device-specific tools, there is a need to integrate these tools

31、 into higher-level system-wide planning- or engineering tools. In particular, for use in extensive and heterogeneous control systems, typically in the area of the process industry, the unambiguous definition of engineering interfaces that are easy to use for all those involved is of great importance

32、. A device-specific software component, called DTM (Device Type Manager), is supplied by the field device manufacturer with its device. The DTM is integrated into engineering tools via the FDT interfaces defined in this standard. The approach to integration is in general open for all kind of fieldbu

33、sses and thus meets the requirements for integrating different kinds of devices into heterogeneous control systems. Figure 1 shows how IEC 62453-306 is aligned in the structure of the IEC 62453 series. Part 306Communicationprofile integration IEC 61784 CPF 6Figure 1 Part 306 of the IEC 62453 series

34、IEC 1133/09 BS EN 62453-306:200962453-306 IEC:2009(E) 7 FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION Part 306: Communication profile integration IEC 61784 CPF 6 1 Scope Communication Profile Family 6 (commonly known as INTERBUS1) defines communication profiles based on IEC 61158-2 Type 8, IEC 611

35、58-3-8, IEC 61158-4-8, IEC 61158-5-8, and IEC 61158-6-8. The basic profiles CP 6/1 (INTERBUS) and CP 6/3 (INTERBUS minimal subset) are defined in IEC 61784-1. This part of IEC 62453 provides information for integrating the INTERBUS technology into the FDT standard (IEC 62453-2). This part of the IEC

36、 62453 specifies communication and other services. This standard neither contains the FDT specification nor modifies it. 2 Normative references The following referenced documents are indispensable for the application of this specification. For dated references, only the edition cited applies. For un

37、dated references, the latest edition of the referenced document (including any amendments) applies IEC 61158-2, Industrial communication networks Fieldbus specifications Part 2: Physical layer specification and service definition IEC 61158-3-8, Industrial communication networks Fieldbus specificatio

38、ns Part 3-8: Data-link layer service definition Type 8 elements IEC 61158-4-8, Industrial communication networks Fieldbus specifications Part 4-8: Data-link layer protocol specification Type 8 elements IEC 61158-5-8, Industrial communication networks Fieldbus specifications Part 5-8: Application lay

39、er service definition Type 8 elements IEC 61158-6-8, Industrial communication networks Fieldbus specifications Part 6-8: Application layer protocol specification Type 8 elements IEC 61784-1, Industrial communication networks Profiles Part 1: Fieldbus profiles IEC 62453-1:2009, Field Device Tool (FDT

40、) interface specification Part 1: Overview and guidance IEC 62453-2:2009, Field Device Tool (FDT) interface specification Part 2: Concepts and detailed description 1INTERBUS is the trade name of Phoenix Contact GmbH NetworkManagementInfoWrite service. The data types describe the address information

41、of an IEC 61784 CPF 6 device (see Table 4 and Table 5) Table 4 Simple parameter access data types Data type Definition Description systemNumber USINT System number of the address information according to the IEC 61784 CPF 6 specification segmentNumber USINT Segment number of the address information

42、according to the IEC 61784 CPF 6 specification positionNumber USINT Position number of the address information according to the IEC 61784 CPF 6 specification BS EN 62453-306:200962453-306 IEC:2009(E) 11 Table 5 Structured parameter access data types Definition Data type Elementary data types Usage M

43、ultiplicityDescription STRUCT The address information of an IEC 61784 CPF 6 device. systemNumber M 11 segmentNumber M 11 Address positionNumber M 11 9.2 Parameter for boot sequence After the Offline-Parameterization the parameter should be exported via the IDtmParameter Interface. Then a Communicati

44、on DTM can collect the data, configure the cyclic communication of the IEC 61784 CPF 6 network and generate a boot sequence, where the parameter will be written to the physical devices. All boot parameters shall be included in a DTMVariables list named “BOOT_PARAMS”. The boot parameter will be writt

45、en subsequently to the devices. 10 Communication data types The data types described in this clause are used in the following services: connect service; disconnect service; transaction service. The service arguments contain the address information and the communication data (explained in Table 6 and

46、 Table 7). The data types described in this clause are defined for the following namespace. Namespace: fdtinterbus Table 6 Simple communication data types Data type Definition Description systemNumber USINT System number of the address information according to the IEC 61784 CPF 6 specification segme

47、ntNumber USINT Segment number of the address information according to the IEC 61784 CPF 6 specification positionNumber USINT Position number of the address information according to the IEC 61784 CPF 6 specification errorCode ARRAY OF USINT Contains information why a service could not be successfully

48、 executed index UINT Address information according to the IEC 61784 CPF 6 specification subIndex USINT Address information according to the IEC 61784 CPF 6 specification communicationReference UUID Mandatory identifier for a communication link to a device This identifier is allocated by the communic

49、ation component during the connect. The address information shall be used for all following communication calls NOTE This is not the communication reference of the PMS. invokeId USINT Job number for parallel services according to the IEC 61784 CPF 6 specification BS EN 62453-306:2009 12 62453-306 IEC:2009(E) Data type Definition Description reasonCode USINT Cause for a connection