EN 62453-302-2017 en Field device tool (FDT) interface specification - Part 302 Communication profile integration - IEC 61784 CPF 2.pdf

《EN 62453-302-2017 en Field device tool (FDT) interface specification - Part 302 Communication profile integration - IEC 61784 CPF 2.pdf》由会员分享，可在线阅读，更多相关《EN 62453-302-2017 en Field device tool (FDT) interface specification - Part 302 Communication profile integration - IEC 61784 CPF 2.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Field device tool (FDT) interface specificationPart 302: Communication profile integration - IEC 61784 CPF 2 (IEC 62453-302:2016)BS EN 62453-302:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62453-302 Decembe

2、r 2017 ICS 25.040.40; 35.100.05; 35.110 Supersedes EN 62453-302:2009 English Version Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2 (IEC 62453-302:2016) Spcification des interfaces des outils des dispositifs de terrain (FDT) - Partie 3

3、02: Intgration des profils de communication - CPF 2 de lIEC 61784 (IEC 62453-302:2016) Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 302: Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 2 nach IEC 61784 (IEC 62453-302:2016) This European Standard was approved

4、by CENELEC on 2016-07-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

5、standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own la

6、nguage and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fr

7、ance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Euro

8、pen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62453-302:2017 E Nation

9、al forewordThis British Standard is the UK implementation of EN 62453302:2017. It is identical to IEC 62453302:2016. It supersedes BS EN 62453302:2009 , which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GEL/65/3, Industrial communications: process measur

10、ement and control, including fieldbus.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards In

11、stitution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 85518 4ICS 35.100.05; 35.110; 25.040.40Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 M

12、arch 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62453302:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62453-302 December 2017 ICS 25.040.40; 35.100.05; 35.110 Supersedes EN 62453-302:2009 English Version Field device tool (FDT) interface sp

13、ecification - Part 302: Communication profile integration - IEC 61784 CPF 2 (IEC 62453-302:2016) Spcification des interfaces des outils des dispositifs de terrain (FDT) - Partie 302: Intgration des profils de communication - CPF 2 de lIEC 61784 (IEC 62453-302:2016) Field Device Tool (FDT)-Schnittste

14、llenspezifikation - Teil 302: Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 2 nach IEC 61784 (IEC 62453-302:2016) This European Standard was approved by CENELEC on 2016-07-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t

15、he conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Sta

16、ndard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members ar

17、e the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, P

18、oland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue

19、 de la Science 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62453-302:2017 E BS EN 62453302:2017EN 62453-302:2017 (E) 2 European foreword The text of document 65E/336/CDV, future edition 1 of IEC 62453-30

20、2:2016, prepared by SC 65E “Devices and integration in enterprise systems“, of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62453-302:2017. The following dates are fixed: latest date by which this docu

21、ment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-06-08 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2020-12-08 Attention is drawn to the possibility that some of the ele

22、ments of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62453-302:2016 was approved by CENELEC as a European Standard without any modification. In th

23、e official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61131-3:2013 NOTE Harmonized as EN 61131-3:2013 IEC 62453-1:2009 NOTE Harmonized as EN 62453-1:2009 IEC/TR 62453-41:2009 NOTE Harmonized as CLC/TR 62453-41:2009 IEC/TR 62453-502:2009 NOTE Harm

24、onized as CLC/TR 62453-502:2009 BS EN 62453302:2017EN 62453-302:2017 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content consti

25、tutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),

26、 the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61158-2 - Industrial communication networks - Fieldbus specifications - Part 2: Physical layer spe

27、cification and service definition EN 61158-2 - IEC 61158-3-2 - Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements EN 61158-3-2 - IEC 61158-4-2 - Industrial communication networks - Fieldbus specifications - Part 4-2: Data-link

28、 layer protocol specification - Type 2 elements EN 61158-4-2 - IEC 61158-5-2 2014 Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements EN 61158-5-2 2014 IEC 61158-6-2 2014 Industrial communication networks - Fieldbus specifica

29、tions - Part 6-2: Application layer protocol specification - Type 2 elements EN 61158-6-2 2014 IEC 61784-1 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles EN 61784-1 - IEC 61784-2 - Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for rea

30、l-time networks based on ISO/IEC 8802-3 EN 61784-2 - IEC 61784-3-2 2010 Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 EN 61784-3-2 2010 IEC 62026-3 - Low-voltage switchgear and controlgear - Controller-device interfaces (C

31、DIs) - Part 3: DeviceNet - - IEC 62453-1 - Field Device Tool (FDT) interface specification - Part 1: Overwiew and guidance EN 62453-1 - IEC 62453-2 - Field Device Tool (FDT) Interface Specification - Part 2: Concepts and detailed Description EN 62453-2 - ISO 15745-2 2003 Industrial automation system

32、s and integration - Open systems application integration framework - Part 2: Reference description for ISO 11898-based control systems - - ISO 15745-3 2003 Industrial automation systems and integration - Open systems application integration framework - Part 3: Reference description for IEC 61158 bas

33、ed control systems - - BS EN 62453302:2017 2 IEC 62453-302:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references. 7 3 Terms, definitions, symbols, abbreviated terms and conventions. 8 3.1 Terms and definitions 8 3.2 Symbols and abbreviated terms . 8 3.3 Conventions 8

34、3.3.1 Data type names and references to data types . 8 3.3.2 Vocabulary for requirements . 8 4 Bus category . 9 5 Access to instance and device data 10 6 Protocol specific behavior 10 7 Protocol specific usage of general data types . 11 8 Protocol specific common data types . 11 9 Network management

35、 data types . 15 9.1 General . 15 9.2 Node address 15 9.3 Scanner/master Bus parameter set (CIP) 15 10 Communication data types . 23 11 Channel parameter data types . 25 12 Device identification 28 12.1 Device type identification data types 28 12.2 Topology scan data types 29 12.3 Scan identificatio

36、n data types 29 12.4 Device type identification data types 29 Annex A (informative) Implementation hints 32 A.1 Addressing in CompoNet DTMs . 32 A.2 Displaying addresses of CompoNet DTMs . 33 A.3 Handling of Config1 and Config2 elements in EtherNet/IP 33 Bibliography . 34 Figure 1 Part 302 of the IE

37、C 62453 series 6 Figure A.1 Examples of DTM naming for CompoNet 33 Table 1 Protocol identifiers . 9 Table 2 Physical layer identifiers for DeviceNet 9 Table 3 Physical layer identifiers for ControlNet 9 Table 4 Physical layer identifiers for Ethernet/IP . 9 Table 5 Physical layer identifiers for Com

38、poNet 10 Table 6 Data link layer identifiers . 10 Table 7 Protocol specific usage of general data types . 11 Table 8 Simple protocol specific common data types 12 BS EN 62453302:2017IEC 62453-302:2016 IEC 2016 3 Table 9 Structured protocol specific common data types . 13 Table 10 Simple fieldbus con

39、figuration data types 15 Table 11 Structured fieldbus configuration data types . 17 Table 12 Simple communication data types 23 Table 13 Structured communication data types . 24 Table 14 Simple channel parameter data types . 26 Table 15 Structured channel parameter data types . 26 Table 16 Identific

40、ation data types with protocol specific mapping 28 Table 17 Simple identification data types with protocol independent semantics . 28 Table 18 Structured identification data types with protocol independent semantics 28 Table 19 Simple scan identification data types 29 Table 20 Structured scan identi

41、fication data types 29 Table 21 Structured device type identification data types 30 Table A.1 CompoNet relationship between Device Category, Node Address, MAC ID 32 BS EN 62453302:2017 4 IEC 62453-302:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIELD DEVICE TOOL (FDT) INTERFACE SPECIFI

42、CATION Part 302: Communication profile integration IEC 61784 CPF 2 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote internatio

43、nal co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter ref

44、erred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate i

45、n this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an interna

46、tional consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonab

47、le efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Pu

48、blications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformit

49、y. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical co