EN 62453-302-2009 en Field device tool (FDT) interface specification - Part 302 Communication profile integration - IEC 61784 CPF 2《现场装置工具(FDT)接口规范 第302部分 通讯剖面综合 IEC 61784 CPF 2》.pdf

《EN 62453-302-2009 en Field device tool (FDT) interface specification - Part 302 Communication profile integration - IEC 61784 CPF 2《现场装置工具(FDT)接口规范 第302部分 通讯剖面综合 IEC 61784 CPF 2》.pdf》由会员分享，可在线阅读，更多相关《EN 62453-302-2009 en Field device tool (FDT) interface specification - Part 302 Communication profile integration - IEC 61784 CPF 2《现场装置工具(FDT)接口规范 第302部分 通讯剖面综合 IEC 61784 CPF 2》.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interfacespecification Part 302: Communication profile integration IEC 61784 CPF 2BS EN 62453-302:2009National forewordThis British Standard is the UK imp

2、lementation of EN 62453-302:2009. It isidentical to IEC 62453-302:2009.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communications: process measurement and control, including fieldbus.A list of organizations represented on this committee can be obtain

3、ed onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 62561 9ICS 25.040.40; 35.100.05; 35.110Compliance with a British Standard cannot confer immunity fromlegal o

4、bligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62453-302:2009EUROPEAN STANDARD EN 62453-302 NORME EUROPENNE EUROPISCHE NORM October

5、2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserv

6、ed worldwide for CENELEC members. Ref. No. EN 62453-302:2009 E ICS 25.040.40; 35.100.05; 35.110 English version Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2 (IEC 62453-302:2009) Spcification des interfaces des outils des dispositifs

7、de terrain (FDT) - Partie 302: Intgration des profils de communication - CEI 61784 CPF 2 (CEI 62453-302:2009) Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 302: Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 2 nach IEC 61784 (IEC 62453-302:2009) This European

8、 Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references co

9、ncerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member in

10、to its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irel

11、and, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62453-302:2009EN 62453-302:2009 - 2 - Foreword The text of document 65E/126/FDIS, future edition 1 of IEC 62453-302, prep

12、ared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-302 on 2009-08-01. Each part of the EN 62453-3xy series is intended to be read i

13、n conjunction with EN 62453-2. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-05-01 latest date by which the national standards conflicting with the EN have to be withdr

14、awn (dow) 2012-08-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62453-302:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the sta

15、ndards indicated: 2 IEC 61131-3 NOTE Harmonized as EN 61131-3:2003 (not modified). 4 IEC/TR 62453-41 NOTE Harmonized as CLC/TR 62453-41:2009 (not modified). 5 IEC/TR 62453-502 NOTE Harmonized as CLC/TR 62453-502:2009 (not modified). _ BS EN 62453-302:2009- 3 - EN 62453-302:2009 Annex ZA (normative)

16、Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referen

17、ced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61158-2 1)Industrial communication networks - Fieldbus specifications - Part 2: Phy

18、sical layer specification and service definition EN 61158-2 20082)IEC 61158-3-2 1)Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements EN 61158-3-2 20082)IEC 61158-4-2 1)Industrial communication networks - Fieldbus specification

19、s - Part 4-2: Data-link layer protocol specification - Type 2 elements EN 61158-4-2 20082)IEC 61158-5-2 2007 Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements EN 61158-5-2 2008 IEC 61158-6-2 2007 Industrial communication ne

20、tworks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 elements EN 61158-6-2 2008 IEC 61784-1 1)Industrial communication networks - Profiles - Part 1: Fieldbus profiles EN 61784-1 20082)IEC 61784-2 1)Industrial communication networks - Profiles - Part 2: Addit

21、ional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 EN 61784-2 20082)IEC 61784-3-2 2007 Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 EN 61784-3-2 2008 IEC 62026-3 1)Low-voltage switchgear and controlgea

22、r - Controller-device interfaces (CDIs) - Part 3: DeviceNet EN 62026-3 20092)IEC 62453-1 2009 Field device tool (FDT) interface specification - Part 1: Overview and guidance EN 62453-1 2009 IEC 62453-2 2009 Field device tool (FDT) interface specification - Part 2: Concepts and detailed description E

23、N 62453-2 2009 ISO/IEC 19501 2005 Information technology - Open Distributed Processing - Unified Modeling Language (UML) 1)Undated reference. 2)Valid edition at date of issue. BS EN 62453-302:2009EN 62453-302:2009 - 4 - Publication Year Title EN/HD Year ISO 15745-2 2003 Industrial automation systems

24、 and integration - Open systems application integration framework - Part 2: Reference description for ISO 11898-based control systems ISO 15745-3 2003 Industrial automation systems and integration - Open systems application integration framework - Part 3: Reference description for IEC 61158-based co

25、ntrol systems BS EN 62453-302:2009 2 62453-302 IEC:2009(E) CONTENTS INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Terms, definitions, symbols, abbreviated terms and conventions 8 3.1 Terms and definitions 8 3.2 Symbols and abbreviated terms.8 3.3 Conventions 8 3.3.1 Data type names and refere

26、nces to data types 8 3.3.2 Vocabulary for requirements9 4 Bus category 9 5 Access to instance and device data9 6 Protocol specific behavior.9 7 Protocol specific usage of general data types.9 8 Protocol specific common data types10 9 Network management data types14 9.1 General .14 9.2 Node address14

27、 9.3 Scanner/master Bus parameter set (CIP) .14 10 Communication data types .22 11 Channel parameter data types24 12 Device identification .26 12.1 Device type identification data types .26 12.2 Topology scan data types27 12.3 Scan identification data types27 12.4 Device type identification data typ

28、es .28 Annex A (informative) Implementation hints .30 Bibliography32 Figure 1 Part 302 of the IEC 62453 series .6 Figure A.1 Examples of DTM naming for CompoNet.31 Table 1 Protocol identifiers 9 Table 2 Protocol specific usage of general data types10 Table 3 Simple protocol specific common data type

29、s .10 Table 4 Structured protocol specific common data types12 Table 5 Simple fieldbus configuration data types .14 Table 6 Structured fieldbus configuration data types 16 Table 7 Simple communication data types .22 Table 8 Structured communication data types23 Table 9 Simple channel parameter data

30、types25 Table 10 Structured channel parameter data types 25 Table 11 Identification data types with protocol specific mapping.27 BS EN 62453-302:200962453-302 IEC:2009(E) 3 Table 12 Simple identification data types with protocol independent semantics27 Table 13 Structured identification data types w

31、ith protocol independent semantics 27 Table 14 Simple scan identification data types.28 Table 15 Structured scan identification data types .28 Table 16 Structured device type identification data types .29 Table A.1 CompoNet relationship between Device Category, Node Address, MAC ID 30 BS EN 62453-30

32、2:2009 6 62453-302 IEC:2009(E) INTRODUCTION This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool) components for function control and data access within a client/server architecture. The specification is a result of an analysis and design process to develop s

33、tandard interfaces to facilitate the development of servers and clients by multiple vendors that need to interoperate seamlessly. With the integration of fieldbusses into control systems, there are a few other tasks which need to be performed. In addition to fieldbus- and device-specific tools, ther

34、e is a need to integrate these tools into higher-level system-wide planning- or engineering tools. In particular, for use in extensive and heterogeneous control systems, typically in the area of the process industry, the unambiguous definition of engineering interfaces that are easy to use for all t

35、hose involved is of great importance. A device-specific software component, called DTM (Device Type Manager), is supplied by the field device manufacturer with its device. The DTM is integrated into engineering tools via the FDT interfaces defined in this specification. The approach to integration i

36、s in general open for all kinds of fieldbusses and thus meets the requirements for integrating different kinds of devices into heterogeneous control systems. Figure 1 shows how IEC 62453-302 is aligned in the structure of the IEC 62453 series. Part 302 CommunicationProfileIntegration IEC 61784 CPF 2

37、Figure 1 Part 302 of the IEC 62453 series IEC 1125/09 BS EN 62453-302:200962453-302 IEC:2009(E) 7 FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION Part 302: Communication profile integration IEC 61784 CPF 2 1 Scope Communication Profile Family 2 (commonly known as CIP1) defines communication profiles

38、 based on IEC 61158-2 Type 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, IEC 61158-6-2, and IEC 62026-3. The basic profiles CP 2/1 (ControlNet2), CP 2/2 (EtherNet/IP3), and CP 2/3 (DeviceNet1) are defined in IEC 61784-1 and IEC 61784-2. An additional communication profile (CompoNet1), also based o

39、n CIP, is defined in 14. This part of IEC 62453 provides information for integrating the CIP technology into the FDT interface specification (IEC 62453-2). This part of IEC 62453 specifies communication and other services. This specification neither contains the FDT specification nor modifies it. 2

40、Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61158-2, Industrial comm

41、unication networks Fieldbus specifications Part 2: Physical layer specification and service definition IEC 61158-3-2, Industrial communication networks Fieldbus specifications Part 3-2: Data-link layer service definition Type 2 elements IEC 61158-4-2, Industrial communication networks Fieldbus speci

42、fications Part 4-2: Data-link layer protocol specification Type 2 elements IEC 61158-5-2:2007, Industrial communication networks Fieldbus specifications Part 5-2: Application layer service definition Type 2 elements 1CIP (Common Industrial Protocol), DeviceNet and CompoNet are trade names of Open De

43、viceNet Vendor Association, Inc (ODVA). This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trade name holder or any of its products. Compliance to this standard does not require use of the trade names CIP, DeviceNet or CompoNe

44、t. Use of the trade names CIP, DeviceNet or CompoNet requires permission of Open DeviceNet Vendor Association,Inc. 2ControlNet is a trade name of ControlNet International, Ltd. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of th

45、e trademark holder or any of its products. Compliance to this profile does not require use of the trade name ControlNet. Use of the trade name ControlNet requires permission of ControlNet International, Ltd. 3EtherNet/IP is a trade name of ControlNet International, Ltd. and Open DeviceNet Vendor Ass

46、ociation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the trade name EtherNet/IP. Use of the trade name EtherNet/IP requir

47、es permission of either ControlNet International, Ltd. or Open DeviceNet Vendor Association, Inc. BS EN 62453-302:2009 8 62453-302 IEC:2009(E) IEC 61158-6-2:2007, Industrial communication networks Fieldbus specifications Part 6-2: Application layer protocol specification Type 2 elements IEC 61784-1,

48、 Industrial communication networks Profiles Part 1: Fieldbus profiles IEC 61784-2, Industrial communication networks Profiles Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 IEC 61784-3-2:2007, Industrial communication networks Profiles Part 3-2: Functional safety

49、 fieldbuses Additional specifications for CPF 2 IEC 62026-3, Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 3: DeviceNet IEC 62453-1:2009, Field Device Tool (FDT) interface specification Part 1: Overview and guidance IEC 62453-2:2009, Field Device Tool (FDT) interface specification Part 2: Concepts and detailed description I