EN 62317-5-2015 en Ferrite cores - Dimensions - Part 5 EP-cores and associated parts for use in inductors and transformers.pdf

《EN 62317-5-2015 en Ferrite cores - Dimensions - Part 5 EP-cores and associated parts for use in inductors and transformers.pdf》由会员分享，可在线阅读，更多相关《EN 62317-5-2015 en Ferrite cores - Dimensions - Part 5 EP-cores and associated parts for use in inductors and transformers.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationFerrite cores DimensionsPart 5: EP-cores and associated parts for use in inductors and transformersBS EN 62317-5:2015National forewordThis British Standard is the UK implementation of EN 62317-5:2015. It isidentical to IEC 62317-5:2015. It supersedes BS EN 61596:1997 which i

2、s withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/51, Transformers, inductors, magnetic components and ferrite materials.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to inc

3、lude all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 82409 8ICS 29.100.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This Bri

4、tish Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62317-5:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62317-5 December 2015 ICS 29.100.10

5、Supersedes EN 61596:1997 English Version Ferrite cores - Dimensions - Part 5: EP-cores and associated parts for use in inductors and transformers (IEC 62317-5:2015) Noyaux ferrites - Dimensions - Partie 5: Noyaux EP et pices associes utiliss dans les inductances et transformateurs (IEC 62317-5:2015)

6、 Ferritkerne - Mae - Teil 5: EP-Kerne und zugehrige Teile zum Einsatz in Drosseln und Transformatore (IEC 62317-5:2015) This European Standard was approved by CENELEC on 2015-10-27. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givin

7、g this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three o

8、fficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrot

9、echnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romani

10、a, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

11、2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62317-5:2015 E BS EN 62317-5:2015EN 62317-5:2015 2 European foreword The text of document 51/1063/CDV, future edition 1 of IEC 62317-5, prepared by IEC/TC 51 “Magnetic components

12、and ferrite materials“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62317-5:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-07-

13、27 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-10-27 This document supersedes EN 61596:1997. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall no

14、t be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62317-5:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for

15、 the standards indicated: IEC 60205:2006 NOTE Harmonized as EN 60205:2006 (not modified). IEC 62317-1 NOTE Harmonized as EN 62317-1. BS EN 62317-5:2015 2 IEC 62317-5:2015 IEC 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references. 6 3 Primary standards . 6 3.1 General . 6 3.2 D

16、imensions of EP-cores 6 3.2.1 Principal dimensions 6 3.2.2 Effective parameter and Aminvalues 7 3.3 Main dimensions of coil formers. 8 3.4 Pin locations and base outlines . 9 Annex A (normative) EP-core design 11 A.1 General . 11 A.2 Pin locations and base outlines . 11 Bibliography . 12 Figure 1 Pr

17、incipal dimensions of EP-cores 7 Figure 2 Main dimensions of coil formers for EP-cores 8 Figure 3 Pin locations (SMD type) viewed from the upper side of the board . 9 Figure 4 Pin locations (PTH type) viewed from the underside of the board . 10 Table 1 Principal dimensions of EP-cores . 7 Table 2 Ef

18、fective parameter and Aminvalues . 8 Table 3 Main dimensions of coil formers for EP-cores . 8 BS EN 62317-5:2015IEC 62317-5:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FERRITE CORES DIMENSIONS Part 5: EP-cores and associated parts for use in inductors and transformers FOREWORD 1) The

19、 International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and

20、 electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical com

21、mittees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization f

22、or Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committe

23、e has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is ac

24、curate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regi

25、onal publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in

26、 some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agen

27、ts including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of,

28、or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some o

29、f the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62317-5 has been prepared IEC technical committee 51: Magnetic components and ferrite materials. This first edition

30、cancels and replaces the first edition of IEC 61596 published in 1995. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61596: a) addition of EP5-core in Table 1, b) addition of effective parameter and Aminvalues, ma

31、in dimensions of coil formers, and pin locations and base outlines for EP5-core. BS EN 62317-5:2015 4 IEC 62317-5:2015 IEC 2015 The text of this standard is based on the following documents: CDV Report on voting 51/1063/CDV 51/1103/RVC Full information on the voting for the approval of this standard

32、 can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62317 series, published under the general title Ferrite cores Dimensions, can be found on the IEC website. The commi

33、ttee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised editio

34、n, or amended. BS EN 62317-5:2015IEC 62317-5:2015 IEC 2015 5 INTRODUCTION IEC 62317 consists of the following parts, under the general title Ferrite cores Dimensions: Part 1: General specification Part 2: Pot-cores for use in telecommunications, power supply, and filter applications Part 3: Half pot

35、-cores1Part 4: RM-cores and associated parts Part 5: EP-cores and associated parts for use in inductors and transformers Part 6: ETD-cores for use in power supplies2Part 7: EER-cores Part 8: E-cores Part 9: Planar cores Part 10: PM-cores3Part 11: EC-cores for use in power supply applications4Part 12

36、: Ring cores5Part 13: PQ-cores for use in power supply applications Part 14: EFD-cores for use in power supply applications6_ 1Under consideration. 2To be published. 3Under consideration. 4Under consideration. 5Under consideration. 6Under consideration. BS EN 62317-5:2015 6 IEC 62317-5:2015 IEC 2015

37、 FERRITE CORES DIMENSIONS Part 5: EP-cores and associated parts for use in inductors and transformers 1 Scope This part of IEC 62317 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of EP-cores, the essential dimensions of coil formers to be use

38、d with these cores and the locations of their terminal pins on a 2,50 mm printed wiring grid in relation to the base outlines of the cores, and the effective parameter values to be used in calculations involving them. The general considerations upon which the design of this range of cores is based a

39、re as given in Annex A. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced docum

40、ent (including any amendments) applies. Void. 3 Primary standards 3.1 General Compliance with the following requirements ensures mechanical interchangeability of complete assemblies and wound coil formers. 3.2 Dimensions of EP-cores 3.2.1 Principal dimensions The principal dimensions of EP-cores sha

41、ll be as given in Figure 1 and Table 1. BS EN 62317-5:2015IEC 62317-5:2015 IEC 2015 7 Figure 1 Principal dimensions of EP-cores Table 1 Principal dimensions of EP-cores Size A mm C mm K mm E mm F mm 2B mm 2D mm Min. Max. Min. Max. Max. Min. Max. Min. Max. Min. Max. Min. Max. EP5 5,85 6,15 3,70 3,90

42、1,00 4,25 4,55 1,60 1,80 5,50 5,70 3,80 4,20 EP7 9,00 9,40 6,20 6,50 1,80 7,20 7,60 3,20 3,40 7,30 7,50 5,00 5,40 EP10 11,2 11,8 7,45 7,85 1,95 9,20 9,60 3,15 3,45 10,0 10,4 7,20 7,60 EP13 12,2 12,8 8,60 9,00 2,50 9,70 10,3 4,20 4,50 12,7 13,0 9,00 9,40 EP17 17,6 18,4 10,75 11,25 3,45 11,6 12,4 5,50

43、 5,85 16,6 17,0 11,0 11,6 EP20 23,5 24,5 14,6 15,3 4,70 16,1 16,9 8,50 9,00 21,2 21,6 14,0 14,6 EP30 30,5 31,5 22,6 23,6 7,85 23,6 24,4 14,5 15,0 29,7 30,0 23,0 23,8 3.2.2 Effective parameter and Aminvalues The effective parameter values of a pair of cores having the dimensions given in 3.2.1 are as

44、 shown in Table 2. EFAC K 2D 2B IEC BS EN 62317-5:2015 8 IEC 62317-5:2015 IEC 2015 Table 2 Effective parameter and Aminvalues Size C1mm1C2mm3lemm Aemm2Vemm3Amin amm2EP5 3,206 3 1 070,7 1039,60 2,99 28,8 2,27 EP7 1,450 6 135, 85 10315,5 10,7 65 8,55 EP10 1,696 8 150, 50 10319,1 11,3 216 8,55 EP13 1,2

45、34 1 63, 326 10324,1 19,5 469 14,9 EP17 0,840 01 24, 868 10328,4 33,8 958 25,3 EP20 0,507 91 6, 460 3 10339,9 78,6 3 140 60,1 EP30 0,348 63 1, 950 0 10362,3 179 11 100 149 NOTE The above values have been calculated using the method given in 3.8 of IEC 60205:2006.a Aminis selected as the smallest val

46、ue among A1, A2, A3, A4and A5using the mean value of each dimension.3.3 Main dimensions of coil formers The main dimensions of coil formers suitable for use with a pair of EP-cores shall be as given in Figure 2 and Table 3. Figure 2 Main dimensions of coil formers for EP-cores Table 3 Main dimension

47、s of coil formers for EP-cores Size e mm f1mm f2mm d mm s mm Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. EP5 4,00 4,20 2,65 2,85 1,85 2,05 3,50 3,70 0,30 0,50 EP7 6,70 7,00 4,30 4,70 3,60 3,80 4,45 4,75 0,60 0,80 EP10 8,60 9,00 4,65 4,95 3,60 3,80 6,70 7,00 0,50 0,70 EP13 9,30 9,60 5,55 5,85 4

48、,60 4,80 8,60 8,90 0,45 0,65 EP17 11,1 11,4 7,05 7,35 6,00 6,30 10,6 10,9 0,55 0,75 EP20 15,6 15,9 10,0 10,3 9,10 9,40 13,5 13,9 0,55 0,75 EP30 23,1 23,5 16,7 17,0 15,1 15,4 22,5 22,9 0,80 1,00 d IEC s s ef2f1BS EN 62317-5:2015IEC 62317-5:2015 IEC 2015 9 3.4 Pin locations and base outlines Pin locat

49、ions and base outlines shall be as shown in Figure 3, in which the base is viewed in the mounting direction, i.e. from the upper side of the printed wiring board, and in Figure 4, in which the base is viewed from the pin side, i.e. from the underside of the printed wiring boards. Dimensions in mm Figure 3 Pin locations (SMD type) viewed from the upper side of the board IEC 1,851,11,5 5,6 EP5 BS EN 62317-5:2015 10 IEC