EN 62056-8-5-2017 en Electricity metering data exchange - The DLMS COSEM suite - Part 8-5 Narrow-band OFDM G3-PLC communication profile for neighbourhood networks.pdf

《EN 62056-8-5-2017 en Electricity metering data exchange - The DLMS COSEM suite - Part 8-5 Narrow-band OFDM G3-PLC communication profile for neighbourhood networks.pdf》由会员分享，可在线阅读，更多相关《EN 62056-8-5-2017 en Electricity metering data exchange - The DLMS COSEM suite - Part 8-5 Narrow-band OFDM G3-PLC communication profile for neighbourhood networks.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Electricity metering data exchange - The DLMS/COSEM suitePart 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networksBS EN 62056-8-5:2017Incorporating corrigendum December 2017National forewordThis

2、 British Standard is the UK implementation of EN 6205685:2017. It is identical to IEC 6205685:2017, incorporating corrigendum December 2017. The UK participation in its preparation was entrusted to Technical Committee PEL/13, Electricity Meters.A list of organizations represented on this committee c

3、an be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 99731 0ICS 91.140.50; 17

4、.220.20; 17.220; 17.220.01; 35.110Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2018.Amendments/corrigenda issued since publicationDate Text affec

5、ted28 February 2018 Implementation of IEC corrigendum December 2017: subclause 5.5.1.4 correctedBRITISH STANDARDBS EN 6205685:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62056-8-5 November 2017 ICS 35.110; 17.220; 91.140.50 Supersedes CLC/TS 52056-8-5:2015 English Version Electricity me

6、tering data exchange - The DLMS/COSEM suite - Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks (IEC 62056-8-5:2017) change des donnes de comptage de llectricit - La suite DLMS/COSEM - Partie 8-5 : Profil de communication OFDM G3-CPL bande troite pour les rseaux de v

7、oisinage (IEC 62056-8-5:2017) Datenkommunikation der elektrischen Energiemessung - DLMS/COSEM - Teil 8-5: Schmalband-OFDM-G3-PLC-Kommunikationsprofil fr Nachbarschaftsnetzwerke (IEC 62056-8-5:2017) This European Standard was approved by CENELEC on 2017-09-14. CENELEC members are bound to comply with

8、 the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manage

9、ment Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the s

10、ame status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, L

11、ithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elekt

12、rotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62056-8-5:2017 E BS EN 6205685:2017EN 62056-8-5:2017 2 European foreword The text of document

13、 13/1708/CDV, future edition 1 of IEC 62056-8-5, prepared by IEC/TC 13 “Electrical energy measurement and control“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62056-8-5:2017. The following dates are fixed: latest date by which the document has to be implemented at na

14、tional level by publication of an identical national standard or by endorsement (dop) 2018-06-14 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-09-14 This document supersedes CLC/TS 52056-8-5:2015. Attention is drawn to the possibility that

15、some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62056-8-5:2017 was approved by CENELEC as a European Standard without any modi

16、fication. BS EN 6205685:2017EN 62056-8-5:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this

17、document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies

18、. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050-300 - International Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Pa

19、rt 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument - - IEC 62056-1-0 - Electricity metering data exchange - The DLMS/COSEM su

20、ite - Part 1-0: Smart metering standardisation framework EN 62056-1-0 - IEC 62056-4-7 2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 4-7: DLMS/COSEM transport layer for IP networks EN 62056-4-7 2016 IEC 62056-5-3 2017 Electricity metering data exchange - The DLMS/COSEM suite -

21、 Part 6-2: COSEM interface classes EN 62056-5-3 2017 IEC 62056-6-1 - Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) FprEN 62056-6-1 - IEC 62056-6-2 - Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface class

22、es FprEN 62056-6-2 - IEC 62056-9-7 2013 Electricity metering data exchange - The DLMS/COSEM suite - Part 9-7: Communication profile for TCP-UDP/IP networks EN 62056-9-7 2013 IEC/TR 62051 - Electricity metering - Glossary of terms - - IEC/TR 62051-1 - Electricity metering - Data exchange for meter re

23、ading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM - - IEEE 802.15.4 - IEEE Standard for Low-Rate Wireless Networks - - IETF RFC 2460 - Internet Protocol - Version 6 (IPv6) - Specification - - IETF RFC 4193 - Unique Lo

24、cal IPv6 Unicast Addresses - - IETF RFC 4291 - IP Version 6 Addressing Architecture - - IETF RFC 4861 - Neighbor Discovery for IP version 6 (IPv6) - - IETF RFC 4862 - IPv6 Stateless Address Autoconfiguration - - IETF RFC 4944 - Transmission of IPv6 Packets over IEEE 802.15.4 Networks - - BS EN 62056

25、85:2017EN 62056-8-5:2017 4 IETF RFC 6282 - Compression Format for IPv6 Datagrams over IEEE 802.15.4-Based Networks - - IETF RFC 768 - User Datagram Protocol - - ITU-T G.9903 2014 SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS - Access networks - In premises networks - Narrow-

26、band orthogonal frequency division multiplexing power line communication transceivers for G3-PLC networks - - BS EN 6205685:2017 2 IEC 62056-8-5:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviated terms 9 3.1 Terms and definiti

27、ons 9 3.2 Abbreviated terms . 9 4 Targeted communication environments 10 5 Use of the communication layers for this profile . 11 5.1 Information related to the use of the standard specifying the lower layers . 11 5.2 Structure of the communication profiles 11 5.3 Lower protocol layers and their use.

28、 12 5.3.1 Overview . 12 5.3.2 Physical layer 14 5.3.3 MAC layer 15 5.3.4 Network layer IPv6 . 16 5.3.5 Transport layer UDP . 19 5.4 Service mapping and adaptation layers . 19 5.4.1 Overview . 19 5.4.2 G3-PLC Adaptation data services 19 5.4.3 G3-PLC Adaptation management services . 19 5.5 Registratio

29、n and connection management . 20 5.5.1 PAN device Connection Manager. 20 5.5.2 PAN Coordinator Connection Manager 21 6 Identification and addressing schemes 23 7 Specific considerations for the application layer services . 23 7.1 Overview. 23 7.2 Application association establishment and release: AC

30、SE services . 23 7.3 DLMS/COSEM services 23 7.4 Security mechanisms 24 7.5 Transferring long application messages 24 7.6 Media access, bandwidth and timing considerations . 24 7.7 Other considerations . 24 7.7.1 UDP DLMS/COSEM wrapper . 24 7.7.2 DLMS/COSEM communication profile for UDP/IP networks .

31、 27 8 Communication configuration and management . 27 9 The COSEM application process . 27 10 Additional considerations for the use of this profile 27 Annex A (informative) Examples 28 A.1 Example 1: setting up a G3-PLC network dedicated to metering . 28 A.2 Example 2: smart meters joining a G3-PLC

32、PAN . 29 Annex B (normative) New COSEM interface classes and OBIS codes 31 Figure 1 Entities and interfaces of a smart metering system using the terminology of IEC 62056-1-0 10 BS EN 6205685:2017IEC 62056-8-5:2017 IEC 2017 3 Figure 2 G3-PLC protocol architecture . 12 Figure 3 PAN device communicatio

33、n profile architecture 13 Figure 4 PAN coordinator communication profile architecture 13 Figure 5 IPv6 address formats . 16 Figure 6 IPv6 Addressing plan example . 17 Figure 7 IPv6 Link-local address composition 18 Figure A.1 PAN coordinator initialisation 28 Figure A.2 PAN device initialisation and

34、 bootstrapping. 30 Table 1 16-bit short addresses allocation rule 18 Table 2 UDP port numbering 19 Table 3 Selections from IEC 62056-4-7:2015 . 25 Table 4 Selections from IEC 62056-9-7:2013 . 27 BS EN 6205685:2017 4 IEC 62056-8-5:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRICITY

35、METERING DATA EXCHANGE THE DLMS/COSEM SUITE Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC Nati

36、onal Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publi

37、cly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governm

38、ental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on

39、technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted

40、by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international u

41、niformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

42、 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should e

43、nsure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage o

44、f any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the

45、referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. T

46、he International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this International Standard may involve the use of a maintenance service concerning the stack of protocols on which the present standard IEC 62056-8-5 is based. The IEC takes no pos

47、ition concerning the evidence, validity and scope of this maintenance service. BS EN 6205685:2017IEC 62056-8-5:2017 IEC 2017 5 The provider of the maintenance service has assured the IEC that he is willing to provide services under reasonable and non-discriminatory terms and conditions for applicant

48、s throughout the world. In this respect, the statement of the provider of the maintenance service is registered with the IEC. Information may be obtained from: G3-PLC Alliance www.g3- International Standard IEC 62056-8-5 has been prepared by IEC technical committee 13: Electrical energy measurement

49、and control. The text of this International Standard is based on the following documents: CDV Report on voting 13/1708/CDV 13/1740/RVC Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. A list of all parts in the IEC 62056 series, published under the general title Electricity metering data exchange The DLMS/COSEM suite, can be found on the I