EN 61960-3-2017 en Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3 Prism.pdf

《EN 61960-3-2017 en Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3 Prism.pdf》由会员分享，可在线阅读，更多相关《EN 61960-3-2017 en Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3 Prism.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applicationsPart 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them (IEC 61960-3:2017)BS EN 61960-3:2017BSI Standards PublicationWB118

2、85_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61960-3 May 2017 ICS 29.220.99 Supersedes EN 61960:2011 English Version Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for

3、 portable applications - Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them (IEC 61960-3:2017) Accumulateurs alcalins et autres accumulateurs lectrolyte non acide - Accumulateurs au lithium pour applications portables - Partie 3: Elments et batteries daccumulateu

4、rs au lithium, paralllpipdiques et cylindriques (IEC 61960-3:2017) Akkumulatoren und Batterien mit alkalischen oder anderen nichtsurehaltigen Elektrolyten - Lithium-Akkumulatoren und -batterien fr tragbare Gerte - Teil 3: Prismatische und zylindrische Akkumulatoren und daraus hergestellte Batterien

5、(IEC 61960-3:2017) This European Standard was approved by CENELEC on 2017-03-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a

6、nd bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under

7、 the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Esto

8、nia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Co

9、mmittee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for C

10、ENELEC Members. Ref. No. EN 61960-3:2017 E National forewordThis British Standard is the UK implementation of EN 61960-3:2017. It is identical to IEC 61960-3:2017. It supersedes BS EN 61960:2011, which will be withdrawn on 14 March 2020.NOTE 1 Other standards with the same main identifier are as fol

11、lows: BS EN 61960-1:2001, Secondary lithium cells and batteries for portable applications Part 1: Secondary lithium cells, withdrawn on 1 March 2007 and replaced by BS EN 61959:2004, BS EN 62133:2003 and BS EN 61960:2004. BS EN 61960-2:2002, Secondary lithium cells and batteries for portable applica

12、tions Part 2: Secondary lithium batteries, withdrawn on 1 March 2007 and replaced by BS EN 61959:2004, BS EN 62133:2003 and BS EN 61960:2004. BS EN 61960:2004, Secondary cells and batteries containing alkaline or other non-acid electrolytes Secondary lithium cells and batteries for portable applicat

13、ions, withdrawn on 1 July 2014 and replaced by BS EN 61960:2011.NOTE 2 BS EN 61960-4, Secondary cells and batteries containing alkaline or other non-acid electrolytes Secondary lithium cells and batteries for portable applications Part 4: Coin-type lithium secondary cells and batteries, is in prepar

14、ation.The UK participation in its preparation was entrusted to Technical Committee PEL/21/1, Secondary cells and batteries containing alkaline and other non-acidic electrolytes.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not

15、 purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 85072 1ICS 29.220.99Compliance with a British Standard cannot confer immunity from legal obl

16、igations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 619603:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61960-3 May 2017 I

17、CS 29.220.99 Supersedes EN 61960:2011 English Version Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them (IEC 6196

18、0-3:2017) Accumulateurs alcalins et autres accumulateurs lectrolyte non acide - Accumulateurs au lithium pour applications portables - Partie 3: Elments et batteries daccumulateurs au lithium, paralllpipdiques et cylindriques (IEC 61960-3:2017) Akkumulatoren und Batterien mit alkalischen oder andere

19、n nichtsurehaltigen Elektrolyten - Lithium-Akkumulatoren und -batterien fr tragbare Gerte - Teil 3: Prismatische und zylindrische Akkumulatoren und daraus hergestellte Batterien (IEC 61960-3:2017) This European Standard was approved by CENELEC on 2017-03-14. CENELEC members are bound to comply with

20、the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Managem

21、ent Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the sa

22、me status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Li

23、thuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektr

24、otechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61960-3:2017 E BS EN 619603:2017EN 61960-3:2017 2 European foreword The text of document 21A/6

25、18/FDIS, future edition 1 of IEC 61960-3, prepared by SC 21A “Secondary cells and batteries containing alkaline or other non-acid electrolytes“, of IEC/TC 21 “Secondary cells and batteries“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61960-3:2017. The following dates

26、 are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-12-14 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-03-14 This document supe

27、rsedes EN 61960:2011 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 619

28、60-3:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60051 NOTE Harmonized in EN 60051 series. IEC 60086-4 NOTE Harmonized as EN 60086-4. IEC 61434 NOTE Harm

29、onized as EN 61434. IEC 61959 NOTE Harmonized as EN 61959. IEC 62281 NOTE Harmonized as EN 62281. IEC 62368-1 NOTE Harmonized as EN 62368-1. BS EN 619603:2017EN 61960-3:2017 2 European foreword The text of document 21A/618/FDIS, future edition 1 of IEC 61960-3, prepared by SC 21A “Secondary cells an

30、d batteries containing alkaline or other non-acid electrolytes“, of IEC/TC 21 “Secondary cells and batteries“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61960-3:2017. The following dates are fixed: latest date by which the document has to be implemented at national

31、level by publication of an identical national standard or by endorsement (dop) 2017-12-14 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-03-14 This document supersedes EN 61960:2011 Attention is drawn to the possibility that some of the elem

32、ents of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61960-3:2017 was approved by CENELEC as a European Standard without any modificatio

33、n. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60051 NOTE Harmonized in EN 60051 series. IEC 60086-4 NOTE Harmonized as EN 60086-4. IEC 61434 NOTE Harmonized as EN 61434. IEC 61959 NOTE Harmonized as EN 61959. IEC 62281 NOTE Harmon

34、ized as EN 62281. IEC 62368-1 NOTE Harmonized as EN 62368-1. EN 61960-3:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indi

35、spensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the r

36、elevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050-482 2004 International Electrotechnical Vocabulary (IEV) - Part 482: Primary and secondary cells a

37、nd batteries - - IEC 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test EN 61000-4-2 - IEC 62133-2 2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for porta

38、ble sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems EN 62133-2 2017 BS EN 619603:2017This page deliberately left blank 2 IEC 61960-3:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 7 3 Terms and definitions 7 4

39、 Parameter measurement tolerances 8 5 Cell designation and marking . 8 5.1 Cell and battery designation 8 5.2 Marking . 10 5.3 Providing the design and produce requirement of batteries . 10 6 Examples of cells 10 7 Electrical tests . 11 7.1 General . 11 7.2 Charging procedure for test purposes . 12

40、7.3 Discharge performance . 12 7.3.1 Discharge performance at 20 C (rated capacity) . 12 7.3.2 Discharge performance at 20 C 12 7.3.3 High rate discharge performance at 20 C 12 7.4 Charge (capacity) retention and recovery 13 7.5 Charge (capacity) recovery after long term storage . 13 7.6 Endurance i

41、n cycles 14 7.6.1 General 14 7.6.2 Endurance in cycles at a rate of 0,2 ItA 14 7.6.3 Endurance in cycles at a rate of 0,5 ItA (accelerated test procedure) 14 7.7 Battery internal resistance 14 7.7.1 General 14 7.7.2 Measurement of the internal AC resistance 15 7.7.3 Measurement of the internal DC re

42、sistance 15 7.8 Electrostatic discharge (ESD) . 16 7.8.1 General 16 7.8.2 Test procedure 16 7.8.3 Acceptance criterion 16 8 Test protocol and conditions for type approval . 16 8.1 Test protocol . 16 8.2 Conditions for type approval . 16 8.2.1 Dimensions 16 8.2.2 Electrical tests . 16 8.2.3 Condition

43、al type approval 16 Annex A (informative) Dimensions of the cell with a laminate film case 19 A.1 General . 19 A.2 Measuring method of cell thickness 19 A.3 Measuring method of cell width . 19 Annex B (informative) Capacity after storage . 21 Bibliography 22 Figure 1 Sample sizes and sequence of tes

44、ts 17 2 IEC 61960-3:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 7 3 Terms and definitions 7 4 Parameter measurement tolerances 8 5 Cell designation and marking . 8 5.1 Cell and battery designation 8 5.2 Marking . 10 5.3 Providing the design and produce requirement of batteri

45、es . 10 6 Examples of cells 10 7 Electrical tests . 11 7.1 General . 11 7.2 Charging procedure for test purposes . 12 7.3 Discharge performance . 12 7.3.1 Discharge performance at 20 C (rated capacity) . 12 7.3.2 Discharge performance at 20 C 12 7.3.3 High rate discharge performance at 20 C 12 7.4 C

46、harge (capacity) retention and recovery 13 7.5 Charge (capacity) recovery after long term storage . 13 7.6 Endurance in cycles 14 7.6.1 General 14 7.6.2 Endurance in cycles at a rate of 0,2 ItA 14 7.6.3 Endurance in cycles at a rate of 0,5 ItA (accelerated test procedure) 14 7.7 Battery internal res

47、istance 14 7.7.1 General 14 7.7.2 Measurement of the internal AC resistance 15 7.7.3 Measurement of the internal DC resistance 15 7.8 Electrostatic discharge (ESD) . 16 7.8.1 General 16 7.8.2 Test procedure 16 7.8.3 Acceptance criterion 16 8 Test protocol and conditions for type approval . 16 8.1 Te

48、st protocol . 16 8.2 Conditions for type approval . 16 8.2.1 Dimensions 16 8.2.2 Electrical tests . 16 8.2.3 Conditional type approval 16 Annex A (informative) Dimensions of the cell with a laminate film case 19 A.1 General . 19 A.2 Measuring method of cell thickness 19 A.3 Measuring method of cell

49、width . 19 Annex B (informative) Capacity after storage . 21 Bibliography 22 Figure 1 Sample sizes and sequence of tests 17 BS EN 619603:2017IEC 61960-3:2017 IEC 2017 3 Figure A.1 Thickness measuring method 20 Figure A.2 Width measuring method . 20 Table 1 Specification examples of secondary lithium cells for portable applications . 11 Table 2 Examples of secondary lithium cells for portable applications 11 Table 3 Endurance in cycles at a rate of 0,2 ItA 14 Table 4 Enduran