EN 61754-9-2001 en Fibre Optic Connector Interfaces - Part 9 Type DS Connector Family《光纤连接器接口 第9部分 DS型连接器系列 IEC 61754-9-1996 修改件》.pdf

《EN 61754-9-2001 en Fibre Optic Connector Interfaces - Part 9 Type DS Connector Family《光纤连接器接口 第9部分 DS型连接器系列 IEC 61754-9-1996 修改件》.pdf》由会员分享，可在线阅读，更多相关《EN 61754-9-2001 en Fibre Optic Connector Interfaces - Part 9 Type DS Connector Family《光纤连接器接口 第9部分 DS型连接器系列 IEC 61754-9-1996 修改件》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Fibre optic connector intertaces Part 9: Type DS connector family The European Standard EN 61754-9:2001 has the status ofa British Standard ICs 33.180.20 BS EN 6 1 754-91200 1 Wk present to the responsible international/European committee any enquiries on the interpretation, or prop

2、osals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60

3、000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period oftime during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cr oss-r e fer enc e s Attention is drawn to the fact that CEN and CENELE

4、C Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitl

5、ed Tnternational Standards Correspondence Index”, or by using the Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance

6、with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 10, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when

7、the document was last issued. O BSI 20 March 2002 ISBN O 580 391 11 6 EUROPEAN STANDARD EN 61754-9 NORME EUROPENNE EUROPISCHE NORM Decem ber 2001 ICs 33.180.20 English version Fibre optic connector interfaces Part 9: Type DS connector family (IEC 61 754-9: 1996, modified) Interface de connecteurs po

8、ur fibres optiques Partie 9: Famille de connecteur de type DS (CE1 61754-9:1996, modifie) Steckgesichter von Lichtwellenleiter- S tec kve r b i n d e r n Teil 2: Bauart DS Steckverbindetfamilie (IEC 61754-9:1996, modifiziert) This European Standard was approved by CENELEC on 1997-03-1 1. CENELEC mem

9、bers are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicati

10、on to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat h

11、as the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United K

12、ingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels O 2001 CENELEC - All rights of exploitation in any form and by any means

13、 reserved worldwide for CENELEC members. Ref. No. EN 61754-9:2001 E Page 2 EN 61754-92001 Foreword The text of document 86B/837/FDIS, future edition 1 of IEC 61754-9, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-

14、CENELEC parallel vote and was approved by CENELEC as EN 61754-9 on 1997-03-11 with a corrigendum to the text of the International Standard. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by end

15、orsement - latest date by which the national standards conflicting with the EN have to be withdrawn (dop) 2002-07-01 (dow) 2002-07-01 O BSI 20 March 2002 Page 3 EN 61754-92001 CONTENTS Page Clause 4 4 1 Scope . 2 Description . 3 Interfaces . . 4 O BSI 20 March 2002 Page 4 EN 61754-92001 FIBRE OPTIC

16、CONNECTOR INTERFACES - Part 9: Type DS connector family 1 Scope This part of IEC 1754 defines the standard interface dimensions for type DS family of connectors. 2 Description The parent connector for type DS connector family is a single position plug connector which is characterized by a cylindrica

17、l, spring-loaded ferrule of a 2,5 mm nominal ferrule diameter. The optical alignment mechanism of the connectors is of a rigid hole or a resilient sleeve style, and is self-contained within the jack connector. 3 Interfaces This standard contains the following standard interfaces Interface 9-1 : Plug

18、 connector interface Interface 9-2 : Jack connector interface The type DS connector family is a connector set of a plug and a jack configuration, and is generally used as a plug-in type backplane connector. The plug is retained to a backplane connector housing which is mounted to a backplane. The ja

19、ck is retained to a printed board housing which is fixed to a printed board. The plug mates to the jack by plugging the printed board into the backplane. The plug of interface 9-1 and jack of interface 9-2 have a ferrule with a spherically polished ferrule endface, and make physical contact. The fol

20、lowing standard interfaces are intermateable. Interface 9-1 mates with interface 9-2. O BSI 20 March 2002 Page 5 EN 61754-92001 /- Note L OBG cl r BF I Ferrule endface geometry iEC 110796 NOTES 1 2 Allowable thickness of the backplane is maximum 2,5 mm specification Dashed lines are for information

21、only and represent the backplane, the housing and the outer surface of the plug Figure 1 - Plug connector interface O BSI 20 March 2002 Page 6 EN 61754-92001 Table la - Dimensions of the plug connector interface Re fe re n ce A B C D E F BF BG BI Dimension Min i m u m - 4,4 mm 5,9 mm 1,475 mm 8,l mm

22、 0,4 mm 10 mm 1,75 mm 25“ Maximum - 4,45 mm 6,O mm 1,675 mm - 0,6 mm 25 mm 2,26 mm 35“ Notes 1, see table Ib 2 45“ chamfer Radius, 3 Diameter NOTES 1 A chamfer or radius is allowed to a maximum depth of 1,2 mm from the ferrule endface. 2 The dimension D is given for a plug endface when not mated. It

23、 is noticed that the ferrule is movable by a certain axial compression force with direct contacting end faces, and therefore dimension D is variable. Ferrule compression force shall be from 7,8 N to 11,8 N when the position of the optical datum target from the datum X is moved in the range of 1,775

24、mm to 1,975 mm. 3 Dome eccentricity of the spherically polished ferrule endface shall be less than 50 pm. Table 1 b - Grade Dimension Min i m u m Maximum Grade Notes I 1 I 2,4985 I 2,4995 I See note I 2 I 2,4980 I 2,5000 I See note I NOTE -Add grade number to the interface reference number. O BSI 20

25、 March 2002 Page 7 EN 61754-92001 i Ferrule endface geometry NOTE - Dashed lines are for information only and represent the housing and the outer surface of the jack. Figure 2a - Jack connector interface O BSI 20 March 2002 Page 8 EN 61754-92001 Re fe re n ce 1 2 Table 2a - Dimensions of the jack co

26、nnector interface Dimension mm Notes Min i m u m Maximum Resilient sleeve, 1 and 2 Resilient sleeve, 1 and 2 Reference Grade 1 2 A B C D E F G H I J BF BG BI Dimension mm Notes Min i m u m Maxi m u m 2,4985 2,4995 See note 2,4980 2,5000 See note Dimension Min i m u m - 2,7 mm 4,33 mm 6,l mm 7,9 mm 1

27、,775 mm - 0,35 mm 0,4 mm 0,l mm 10 mm 1,75 mm 25“ Maxi m u m - 2,8 mm 4,38 mm 6,2 mm 8,O mm 1,975 mm - 0,55 mm 0,6 mm 0,3 mm 25 mm 2,26 mm 35“ Notes See table 2b 1, See table 2c 45“ chamfer 45“ chamfer 45“ chamfer Radius, 2 Diameter NOTES 1 2 A chamfer or a radius is allowed to a maximum depth of 1,

28、2 mm from the ferrule endface Dome eccentricity of the spherical polished endface shall be less than 50 pm. Table 2b -Alignment device grade O BSI 20 March 2002 Page 9 EN 61754-92001 Re fe re n ce CK CL CN 0 CK 1 70 CL Dimension mm Notes Min i m u m Maximum 2,4985 2,4995 Surface roughness R, = 0,2 p

29、m 2,8 4,8 7 15 IEC 1109/96 Figure 2b - Pin gauge for resilient alignment sleeve Table 2d - Dimensions of the pin gauge for resilient alignment sleeve O BSI 20 March 2002 Page 10 BS EN 61754-92001 National annex NA (informative) Original IEC text amended by CENELEC common modifications The text of th

30、e International Standard IEC 61754-9:1996 was approved by CENELEC as a European Standard with the following corrigendum to IEC 61754-9: Table 2d Replace “Surface roughness grade N4 (0,2 pm radius)“ by “Surface roughness R,= 0,2 pm“. O BSI 20 March 2002 BS EN 6 1 754-91200 1 BSI 389 Chiswick High Roa

31、d Lon don w4 4AL BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Re vi si ons British Standards are updated by amendment or revision. Users of British

32、 Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the te

33、chnical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying

34、 standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: orders&-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international

35、standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical H

36、elp to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 71 11. Fax: +44 (0)20 8996 7048. Email: infomi-. Subscribing members of BSI are kept up to date with stand

37、ards developments and receive substantial discounts on the purchase price of standards. For details ofthese and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 700 1. Email: membershipbsi-. Information regarding online access to British Standards via B

38、ritish Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, ofthe publications of the international standardization bodies. Excep

39、t as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise -without prior written permission from BSI. This does not preclude the free use, i

40、n the course of implementing the standard, ofnecessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then the prior written permission ofBSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyright&-.