EN 61754-29-2012 en Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 29 Type BLINK connector series.pdf

《EN 61754-29-2012 en Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 29 Type BLINK connector series.pdf》由会员分享，可在线阅读，更多相关《EN 61754-29-2012 en Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 29 Type BLINK connector series.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 61754-29:2012Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 29: Type BLINK connector seriesBS EN 61754-29:2012 BRITISH STA

2、NDARDNational forewordThis British Standard is the UK implementation of EN 61754-29:2012.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/86/2, Fibre optic interconnecting devices and passivecomponents.A list of organizations represented on this committee can beobtaine

3、d on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 73813 5ICS 33.180.20Compliance with a B

4、ritish Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2012.Amendments issued since publicationDate Text affectedBS EN 61754-29:2012EUROPEAN STANDARD EN 61754-29 NORME EUROPENNE EUR

5、OPISCHE NORM June 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by

6、any means reserved worldwide for CENELEC members. Ref. No. EN 61754-29:2012 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 29: Type BLINK connector series (IEC 61754-29:2012) Dispositifs dinterconnexion et composan

7、tspassifs fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 29: Srie de connecteurs de type BLINK (CEI 61754-29:2012) Lichtwellenleiter -Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter- Steckverbindern - Teil 29: Steckverbinderfamilie der Bauar

8、t BLINK (IEC 61754-29:2012) This European Standard was approved by CENELEC on 2012-05-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-dat

9、e lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translat

10、ion under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denm

11、ark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61754-29:2012EN 61754-29:2012 - 2 - Forewor

12、d The text of document 86B/3369/FDIS, future edition 1 of IEC 61754-29, prepared by SC 86B “Fibre optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61754-29:2012. The following dates are fixe

13、d: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-02-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-05-24 Attention is drawn to the p

14、ossibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61754-29:2012 was approved by CENELEC as a European

15、 Standard without any modification. BS EN 61754-29:2012- 3 - EN 61754-29:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indis

16、pensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the rele

17、vant EN/HD applies. Publication Year Title EN/HD Year IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies EN 60794-2-50 - IEC 61754-1 - Fibre optic connector interfaces - Part 1: General and guid

18、ance EN 61754-1 - IEC 61755-3 Series Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces EN 61755-3 Series 2 61754-29 IEC:2012 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Description . 6 4 Interfaces . 6 5 Plug opt

19、ical interface 7 6 Plug 9 7 Simplex adaptor . 16 8 Duplex adaptor . 21 9 Pin gauge for adaptor . 24 Figure 1 Plug connector interface reference planes . 7 Figure 2 Detail A of figure 1 APC/PC endface geometry, expanded view drawings not-to-scale. 8 Figure 3 Top view (APC) 8 Figure 4 Plug connector i

20、nterface 12 Figure 5 APC simplex plug connector interface 13 Figure 6 Duplex plug interface . 13 Figure 7 Simplex adaptor (isometric view) 16 Figure 8 Simplex adaptor . 17 Figure 9 Simplex adaptor interface. 19 Figure 10 Simplex adaptor interface section A A 20 Figure 11 Duplex adaptor (isometric vi

21、ew) . 21 Figure 12 Duplex adaptor . 21 Figure 13 Duplex adaptor . 22 Figure 14 Duplex adaptor with dimensions . 22 Figure 15 Pin gauge for adaptor . 24 Table 1 Intermateability between plugs and adaptors within the IEC 61754-29 series 7 Table 2 Intermateability between plugs within the IEC 61754-29

22、series 7 Table 3 Dimensions of the plug connector interface . 14 Table 4 Plug connector interface Ferrule grade . 15 Table 5 Dimensions of the BLINK BLINK adaptor interface . 23 Table 6 Pin gauge dimensions 24 BS EN 61754-29:201261754-29 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE O

23、PTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 29: Type BLINK connector series FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National

24、Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly A

25、vailable Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental

26、 organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on techn

27、ical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IE

28、C National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international unifor

29、mity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) I

30、EC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure

31、 that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any

32、 nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the refer

33、enced publications is indispensable for the correct application of this publication. International Standard IEC 61754-29 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. The text of this standard is based

34、on the following documents: FDIS Report on voting 86B/3369/FDIS 86B/3416/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN

35、61754-29:2012 4 61754-29 IEC:2012 The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfir

36、med, withdrawn, replaced by a revised edition, or amended. BS EN 61754-29:201261754-29 IEC:2012 5 INTRODUCTION The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning IEC 61754-29

37、. IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respec

38、t, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: Huber+Suhner AG Degersheimerstrasse 14 9100 Herisau Switzerland Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other tha

39、n those identified above. IEC shall not be held responsible for identifying any or all such patent rights. ISO (www.iso.org/patents) and IEC (http:/www.iec.ch/tctools/patent_decl.htm) maintain on-line data bases of patents relevant to their standards. Users are encouraged to consult the data bases f

40、or the most up to date information concerning patents. BS EN 61754-29:2012 6 61754-29 IEC:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 29: Type BLINK connector series 1 Scope This part of IEC 61754 defines the standard interface dimensions for

41、 the type BLINK series of connectors. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the re

42、ferenced document (including any amendments) applies. IEC 60794-2-50, Optical fibre cables Part 2-50: Indoor cables Family specification for simplex and duplex cables for use in terminated cable assemblies IEC 61754-1, Fibre optic interconnecting devices and passive components Fibre optic connector

43、interfaces Part 1: General and guidance IEC 61755-3 (all parts), Fibre optic interconnecting devices and passive components Fibre optic connector optical interfaces 3 Description The parent connector for the type BLINK connector family is a single position plug connector set of plug/adaptor/plug con

44、figuration which is characterized by a 1,25 mm nominal diameter ferrule. The connector includes a ferrule spring loaded in the direction of the optical axis. The optical alignment mechanism of the connection is of a resilient sleeve style. 4 Interfaces The general requirements defined in IEC 61754-1

45、 are valid for this standard. Clauses 4 to 8 define the standard interfaces for the type BLINK connector series. The standard interfaces contained in this document are listed in the following: INTERFACE 29-1: Simplex Plug Connector Interface PC INTERFACE 29-2: Simplex Adaptor Interface INTERFACE 29-

46、3: Duplex Plug Connector Interface PC INTERFACE 29-4: Duplex Adaptor Interface INTERFACE 29-5: Simplex Plug Connector Interface APC 8 INTERFACE 29-6: Duplex Plug Connector Interface APC 8 The following plugs and adaptors shown in Table 1 and Table 2 are intermateable. BS EN 61754-29:201261754-29 IEC

47、:2012 7 Table 1 Intermateability between plugs and adaptors within the IEC 61754-29 series Plugs (polishing condition) Adaptor Interfaces 61754-29-2 61754-29-4 Interface 61754-29-1 mate mate Interface 61754-29-3 Not mate mate Interface 61754-29-5 mate mate Interface 61754-29-6 Not mate mate Table 2

48、Intermateability between plugs within the IEC 61754-29 series Plugs (polishing condition) Plugs (polishing condition) 61754-29-1 61754-29-3 61754-29-5 61754-29-6 61754-29-1 mate mate Not mate Not mate 61754-29-3 mate mate Not mate Not mate 61754-29-5 Not mate Not mate mate mate 61754-29-6 Not mate N

49、ot mate mate mate 5 Plug optical interface Plug optical interfaces are sown in Figure 1, Figure 2 and Figure 3. Detail A Optical datum target Optical reference plane Mechanical reference plane IEC 527/12 NOTE Shown without shutter to make features more visible (see Figure 4c) for shutter details). Figure 1 Plug connector interface reference planes The plug of IEC 61754-29-1 and IEC 61754-29-3 has a ferrule with a spherically polished