EN 61169-1-1-1997 en fr Radio-Frequency Connectors Part 1-1 Single Multi-Series Dual-Language Blank Detail Specification《射频连接器 第1-1部分 单一 多系列双语空白详细规范 IEC 1169-1-1-1996》.pdf

《EN 61169-1-1-1997 en fr Radio-Frequency Connectors Part 1-1 Single Multi-Series Dual-Language Blank Detail Specification《射频连接器 第1-1部分 单一 多系列双语空白详细规范 IEC 1169-1-1-1996》.pdf》由会员分享，可在线阅读，更多相关《EN 61169-1-1-1997 en fr Radio-Frequency Connectors Part 1-1 Single Multi-Series Dual-Language Blank Detail Specification《射频连接器 第1-1部分 单一 多系列双语空白详细规范 IEC 1169-1-1-1996》.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、STD-BSI BS EN bLLb7-1-L-ENGL 1797 Lb24bb7 Ob2545b 4q5 M BRITISH STANDARD Radio-frequency connectors Part 1-1. Single, multi-series, dual-language blank detail specification The European Standard EN 61169-1-1 : 1997 has the status of a British Standard ICs 33.120.30 NO COPYING WITHOUT BSI PERMISSION

2、EXCEPT AS PERMITTED BY COPYRIGHT LAW tS EN 51169-1-1 : 1997 EC 1169-1-1 ,996 - monitor related internationai and European developments and promulgate them in the UK. A list of organizations represented on this subcommitLee can be obtained on request to its secretary. Cross-references The British Sta

3、ndards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled Inteniational Standards Correspondence Index, or using the Find facility of the BSI standards Electronic Catalogue. Compliance with a Brit

4、ish Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a hnt cover, an inside front cover, the EN title page, pages 2 to 16, an inside back cover and a back cover. ISBN O 680 2766 O EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61169-1

5、-1 May 1997 ICs 33.1 20.30 Descriptors: Electronic components, R.F. connectors, multi-series connectors English version Radio-f requency connectors Part 1 -1 : Single, multi-series, dual-language blank detail specification (IEC I 169-1 -1 :1996) Connecteurs pour frquences radiolectriques Partie 1-1

6、: Spcification particulire cadre bilingue unique pour plusieurs sries de connecteurs (CE1 1169-1-111996) Hochfrequenz-Steckverbinder Teil 1-1 : Zweisprachiger einheitlicher Vordruck fr Bauartspezifikationen fr verschiedene Baureihen (IEC 11 69-1-1 1996) this European Standard was approved by CENELEC

7、 on 1997-03-1 1. CENELEC members are bound to comply with the CENICENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards

8、 may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified

9、 to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and Un

10、ited Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 1997 CENELEC - All rights of exploitation in any form and by any m

11、eans reserved worldwide for CENELEC members. Ref. No. EN 61169-1-1:1997 E Foreword The text of the International Standard IEC 1169-1-1:1996, prepared by SC 46D, RF connectors, of IEC TC 46, Cables, wires, waveguides, R.F. connectors, and accessories for communication and signalling, was submitted to

12、 the Unique Acceptance Procedure and was approved by CENELEC as EN 61 169-1 -1 on 1997-03-1 1 without any modification. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 1 998

13、-03-0 1 - latest date by which the national standards conflicting with the EN have to be withdrawn (daw) 1 998-03-0 1 This part 1-1 of EN 61 169 is to be used in conjunction with EN 61 169-1:1994 and its amendment Al : 1996. Endorsement notice The text of the International Standard IEC 1 169-1 -1 :

14、1996 was approved by CENELEC as a European Standard without any modification. STD-BSI BS EN bLLbS-l-L-ENGL I777 Lb24667 0625460 776 Page 3 EN 61169-1-1 : 1997 Exemple de la sp6cification IECQ pour la s4rie 1 169 IECQ Specification example for series 1169 SYST also national reference if different. 4

15、If different from the IECQ number, the national number of the DS, date of issue and any further information required by the national system, together with any amendment numbers. Enter the series designation of the connector in the box below the IECQ logo in characters 9 mm approximately high. Identi

16、fication of the component (51 Enter the following details: Style: the style designation or model number of the connector. The method of cablelwire attachment to the centre and outer conductor: by deletion of inapplicable options. Spedal features and markings. Example: fitted with both panel and bani

17、er seals. Mass: the maximum mass in grams, rounded upwards to the nearest whole number. If several variants (having differing mass) are included, list the maximum mass of each variant separately. Enter details of assessment level, characteristic impedance and climatic category. Provide a reproductio

18、n of the outline drawing and panel piercing details showing maximum envelope dimensions of the relevant body style and, in the case of a fixed connector, the position of the mounting plane relative to the front face of the connector. 16) 7l Information shall be given in the places indicated concerni

19、ng the international documents - see the sectional specification (SS) - to which the interface dimension and the outline dimensions comply, together with any maximum panel thickness limitations for fixed connectors. The symbol may be converted to indicate elther first-angle or third-angle projection

20、 by deleting the inappropriate part of the drawing: First angle Third angle * Ln * Page 5 EN 61169-1-1 : 1997 e Particulars of all variants covered by the DS. Where appropriate, the information shall include: - cable types (or sizes) applicable to each variant; - alternative plated or protective fin

21、ishes; - details of alternative mounting flanges having either tapped or plain mounting holes; - details of alternative solder spills or solder buckets for microwave component- mounting styles. Performance data listing the most important characteristics of the connector in accordance with the requir

22、ements in 3.1 of the SS. Deviations from the minimum requirements listed shall be clearly indicated. Non-applicable parameters shall be market “na“. 9 i O Enter the information as applicable. ll Refer to the test groupings and schedule of tests in subclause 3.3 of the relevant sectlonal specificatio

23、n and enter the letter “a“ in the “Test required“ columns against those tests shown to be mandatory for the applicable assessment level. At the discretion of the specification miter, the letter *a“ shall be entered also to indicate any additional test(s) required. In the “Number of specimens“ column

24、s, the number shall be entered as given in 3.3 of the relevant sectional specification for the applicable assessment level. For (51 and 6) the text to be given in the DS should be suitable for an entry in IEC QC 001004 (specification list) or IEC QC 001005* (QPL). Ai the lower right-hand corner of e

25、ach page enter the specification issue number of the detail specification. When all the information has been entered, these introductory pages should be detached from the completed DS and discarded. NOTE - This BDS hw been laid Out to provide entry liner on a 116 inch (4,23 m). 8paGhg to 8Ut 8- rupo

26、mitsr ne spadng in IS0 4W“. After adjusting the position for aie fint enw an -ch pap. na further egurtment should be nocQIIuy. IEC QC 001004: Spedc8rions Ust. IEC OC W1005: RegisW of Fms, Prockids and SeMoes approvd under IECQ System, indutng Is0 9ooo. * IS0 -2: 1919, office machines and dam process

27、ing eqvipment - Une spacings and character spacings. STD-BSI BS EN bLLb7-L-L-ENGL 1997 Lb24bb7 b25463 685 Page 6 EN 61169-1-1 : 1997 1 I Pages li . 2 QC 22 (31 COMPOSANTS ELECTRONKXIES ELECTRONIC COMPONENT DE LA QUALITE CONTROLEE CONFORMEMENT A LA CE OF ASSESSED QUALITY IN ACCORDANCE WITH IEC GS - Q

28、C 220000 (CEVIEC 1169-1) SS - QC 22. (CEVIEC 169-) Edition Issue TYPE SI SPeCIFICATION PARTICULIERE POUR DETAIL SPECIFICATION FOR RADIO- CONNECTEURPOURFREQUENCES FREQUENCYCONNECTOROFASSESSED RADLECTRIQUES DE QUAL -E: Qum Modle: Particularits et marquage: . Mode de raccordement cblefiIo Method of cab

29、lennire attachment style: Special features and marking: . Conducteur central Conducteur extrieur Centre conductor Outer conductor Supprimer la menim inutile Delete as appropriate sertissage Glissibre Siide-on SI Masse . Niveau daaaurance Catgorie climatique I J . Impdance -.- 2 de qualit caractristi

30、que Mass . Assessment level Climatic category J I . Characteristic .- a impedance 7 Dimensions exterieures maximales Outline and maximum dimensions Dtails concernant le perage du panneau et le montage sur panneau Panel piercing and mounting details Les dimensions extrieuros satisfont aux prescriptio

31、ns de: The,outline dimensions meet the requirements of: Pour les dimensions der faces daccouplement et les positions des plans de rfrence voir: OC 22 . (CEIIIEC 169.-) For mating interface dimensions and position of reference plan see: Epaisaeur maximale du panneau: montage par lavant . mm, montage

32、par larrire . mm Maximum panel thickness: for front mounting . mm, for rear mounting . mm * * u) - STD.BS1 BS EN bLLbS-L-L-ENGL 1777 m Lb24bbS Ob254b4 511 Page 7 EN 61169-1-1 : 1997 8) VARIANTES VARIANTS Variants no Variant no. Dercription de Ia variante Description of variant NOTES * IEC 96: Radio-

33、frequency cribler CE1 96: Clbles pour frquences mdiolectrlques Cbles correrpondanWRelevant abies CE1 96 IEC 96“ Page 8 EN 61169-1-1 1997 QI Peffomance (including limiting conditions of use) Ratings and characteristics Electrilul Variant no. Churiclsiirbc impedureo Reflection faotor 41 I Centre conta

34、ct resistance2) Outer conductor resistance Centre conductor continuity Outer oanductomd - 41 U -01 -01 under severe mecharai conditioning Insulation resistance Proof voltrge 41 at sea-wP - Proofvdta e -01 .I. at 4.4 Pa o Damp heat, -01 rlsidy slaw3 clima1Sc) -0 1 . . Water -01 immersion test3 -rip -

35、01 effeess Test method (Qc220000) Subciause IEC 1160-1 9.2.1 9.2.3 9.2.3 9.2.4 9.24 9.2.4 0.2.0 9.2.6 9.4.2 9.4.3 0.4.2 . 9.27 9.2.8 Value n . . “ “. s . ma s . ma 5 .ma s . “ ma ma *.mil ma ln0 L . ma s . ma There shall be no intermittences z . YI 2 aa 2 . MCI kv kv kv kv v “ v v v . v v v v v v v

36、v Proof vdtage v v v v InsuOailon .Ma .Ma . mQ . mn 2 dBat . OHZ 2 . h I I c c c . c c 1 Tham values apply to th. bask conneetor. In pmctlos they may be influenced by aie able used. Reference should be made to the cable specification. a vauw for a pair of connectors. s, Voltages u0 r.m.8. valuw of a

37、.c. at 40 Hr to 65 Hz unias othewise stated. Page 12 EN 61169-1-1 : 1997 4) Any additional marking required I Il O Supplementary information Marking of the component: in accordance with 11.1 of IEC 1169-1 (QC 220000) in the following order of precedence: 1) identity of manufacturer: 2) manufacturing

38、 date code 3) component identification . yearhveek Variant No./ designation Identification . . . . . . . . . Maiking and contents of package: in accordance with 11.2 of IEC 11 69-1 (QC 220000). 1) Information prescribed in 11.1 of IEC 1169-1 (QC 220000) detailed above 2) Nominal characteristic imped

39、ance SI 3) Assessment level code letter Ordering information: In accordance with 22.7 of IEC 11 69-1 (QC 220000) as follows: 1) Number of the detail specification . / Variant code . 2) Assessment level code letter . 3) Body finish (if more than one listed) . 4) Any additional information or special

40、requirements Related documents (if not included in IEC 1169-1 (QC 220000) or sectional specification): Structural similariy in accordance with 22.2 of ,IEC 1 169-1 (QC 22oooO). NOTE - Relevant information on a basic style should be entered as variant 01. * * m STD-BSI BS EN bLLbS-L-L-ENGL 1777 Lb24b

41、b7 Ub2.5470 AL5 Page 13 EN 61169-1-1 1997 1 1 Test schedule and inspection requirements 1 1 .1 Qualification approval procedures One of the following procedures shall be used: a) Fixed quantity sample procedure This shall consist of the appropriate fixed quantity sample passing the initial tests in

42、group O without any failures. The fixed quantity number of specimens shall be: Level M - 36 specimens Levei H - 18 specimens Specimens for groups 01, 02, D4-D7 shall then be selected randomly from the group O specimsns and subjected to the inspection for their particular group. No failures are permi

43、tted. The number of specimens in each group Dl , D2, D4-D6 shall be: Level M - 6 specimens Level H - 3 specimens Any additional specimens required for group D7 inspection shall also first be subjected to group O tests. No failures are permitted. A set of piece parts shall be randomly selected for gr

44、oup 03 inspection. No failures are permitted. b) Lot-by-lot procedure This shall consist of three consecutive lots passing the acceptance tests in groups Al and 81. Specimens from these lots shall be randomly selected for periodic tests in groups DI, 02,04-07 and shall be subjected to the relevant i

45、nspection for their parthlar group. The number of specimens in each group D1, 02,04-D6 shall be: Level M - 6 specimens Level H - 3 specimens A set of piece parts shall be randomly selected for group 03 inspection. No failures are permitted. 11 -2 Quality conformance inspection a) Lot-by-lot tests Th

46、ese shall consist of test groups Al and 61 performed on a lot-by-lot basis. b) Periodic tests There are no group C tests for r.f. connectors, levei H and M. 1 1.3 Maintenance of qualification approval This shall consist of the procedure in 11.1 b) above. 11.4 Test schedule and inspecton requirements

47、 Series Assessment level Page 14 EN 61169-1-1 : 1997 FIXED QUANTITY SAMPLE PROCEDURE - INmAL TEST SEQUENCE: GROUP O LOT-BY-LOT PROCEDURE - ACCEPTANCE TESTS; GROUPS Al AND B1 Visud examination Outline dimensions Mechanical compatibility Engagement and separation Gauge retention (rosilient contacts) S

48、ealing - non-hermetic sealing - hermetic voltage prwf Tert method IEC 1169-1 (Qc220000) Subdause 0.1.2 9.1 3.1 9.1.3.3 9.3.6 0.3.4 0.4.5.1 0.4.5.2 0.2.6 0.3.2.1.1 0.2.5 Fixed quantity sample Initial QA test sequence pmdm - Number of spedmenr Period Lot-bylot Lot-by lot Page 15 EN 61169-1-1 : 1997 So

49、lderability - connector arsemblier Resistance to soldering heat FIXED QUANTITY SAMPLE PROCEDURE - REMAINING QATEST GROUPS LOT-BY-LOT PROCEDURE - PERIODIC GROUP D TESTS 0.3.2.1.1 9.3.2.1.2 Inspections onding moment Strength of coupling mochaniun QlwP m (dl I Subclause I I 0.3.12 9.3.1 1 Group DI (d) Conm and outer conductor continuity under smvom mechanid conditioning Bump vibration -1 9.2.4 0.3.1.3 0.3.3 I I Shadontract requirements i British standard does no