EN 60794-3-30-2008 en Optical fibre cables - Part 3-30 Outdoor cables - Family specification for optical telecommunication cables for lakes river crossings and coastal application《.pdf

《EN 60794-3-30-2008 en Optical fibre cables - Part 3-30 Outdoor cables - Family specification for optical telecommunication cables for lakes river crossings and coastal application《.pdf》由会员分享，可在线阅读，更多相关《EN 60794-3-30-2008 en Optical fibre cables - Part 3-30 Outdoor cables - Family specification for optical telecommunication cables for lakes river crossings and coastal application《.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、Optical fibres Part 3-30: Outdoor cables Family specification for opti-cal telecommuni cation cables for lakes, river crossings and coastal applicationBS EN 60794-3-30:2008raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsNational f

2、orewordThis British Standard is the UK implementation of EN 60794-3-30:2008. It isidentical to IEC 60794-3-30:2008. It supersedes BS EN 60794-3-30:2003which is withdrawn.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommittee GEL/86/1, Optica

3、l fibres and cables.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application.Compliance with a British Standard cannot con

4、fer immunity fromlegal obligations. BSI 200ISBN 978 0 580 56833 6ICS 33.180.10Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60794-3-30:20089This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2009.

5、EUROPEAN STANDARD EN 60794-3-30 NORME EUROPENNE EUROPISCHE NORM November 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 20

6、08 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60794-3-30:2008 E ICS 33.180.10 Supersedes EN 60794-3-30:2003English version Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical telecommunication

7、cables for lakes, river crossings and coastal application (IEC 60794-3-30:2008) Cbles fibres optiques - Partie 3-30: Cbles extrieurs - Spcification de famille pour les cbles optiques de tlcommunication utiliss pour les traverses de lacs, de rivires, et pour applications ctires (CEI 60794-3-30:2008)

8、Lichtwellenleiterkabel - Teil 3-30: Auenkabel - Familienspezifikation fr LWL-Fernmeldekabel fr die Durchquerung von Seen und Flssen und fr Kstenanwendungen (IEC 60794-3-30:2008) This European Standard was approved by CENELEC on 2008-10-01. CENELEC members are bound to comply with the CEN/CENELEC Int

9、ernal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC

10、member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN

11、ELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovaki

12、a, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60794-3-30:2008EN 60794-3-30:2008 2 Foreword The text of document 86A/1203/FDIS, future edition 2 of IEC 60794-3-30, prepared by SC 86A, Fibres and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote

13、 and was approved by CENELEC as EN 60794-3-30 on 2008-10-01. This European Standard supersedes EN 60794-3-30:2003. The main changes with respect to EN 60794-3-30:2003 are listed below: the title of the specification has been updated to include coastal applications; fibre specifications have been enl

14、arged to include fibre Type B5; an annex has been added for additional requirements according to the MICE table. This European Standard is to be read in conjunction with EN 60794-1-1, EN 60794-1-2 and EN 60794-3. The following dates were fixed: latest date by which the EN has to be implemented at na

15、tional level by publication of an identical national standard or by endorsement (dop) 2009-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-10-01 _ Endorsement notice The text of the International Standard IEC 60794-3-30:2008 was approved by C

16、ENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60654 NOTE Harmonized in EN 60654 series (not modified). IEC 60654-4 NOTE Harmonized as EN 60654-4:1997 (not modified). IEC 60721 N

17、OTE Harmonized in EN 60721 series (not modified). IEC 60721-1 NOTE Harmonized as EN 60721-1:1995 (not modified). IEC 60721-3-3 NOTE Harmonized as EN 60721-3-3:1995 (not modified). IEC 61000-6-2 NOTE Harmonized as EN 61000-6-2:2005 (not modified). IEC 61918 NOTE Harmonized as EN 61918:2008 (modified)

18、. _ BS EN 60794-3-30:2008 3 EN 60794-3-30:2008 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cite

19、d applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Addition to Annex ZA of EN 60794-1-1, EN 60794-1-2 an

20、d EN 60794-3: Publication Year Title EN/HD Year IEC 60793-1-48 - 1)Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion EN 60793-1-48 2007 2)IEC 60793-2-50 - 1)Optical fibres - Part 2-50: Product specifications - Sectional specification for class B singl

21、e-mode fibres EN 60793-2-50 2008 2)1)Undated reference. 2)Valid edition at date of issue. BS EN 60794-3-30:2008 2 60794-3-30 IEC:2008 CONTENTS 1 Scope.5 2 Normative references .5 3 Symbols and abbreviations.6 4 Family specification for optical telecommunication cables to be used in lakes, river cros

22、sings and coastal application (blank detail specification and minimum requirements) .6 4.1 Optical fibres.6 4.1.1 Single-mode dispersion unshifted (B1.1) optical fibre 6 4.1.2 Single-mode dispersion unshifted (B1.2) optical fibre 7 4.1.3 Single-mode dispersion unshifted (B1.3) optical fibre 8 4.1.4

23、Single-mode dispersion shifted (B2) optical fibre .8 4.1.5 Single-mode non-zero dispersion (B4) optical fibre9 4.1.6 Single-mode non-zero dispersion shifted (B5) optical fibre 10 4.2 Cable element .10 4.3 Installation and operating conditions .11 4.4 Mechanical and environmental tests )11 4.4.1 Test

24、s applicable 12 4.4.2 Details on family requirements and test conditions for optical fibre cable tests.13 Annex A (informative) Family specification for optical telecommunication cables to be used in lakes, river crossings and coastal application (Blank detail specification and minimum requirements)

25、 Cable description17 Annex B (normative) Cable construction 19 Annex C (informative) BDS for ISO/IEC 24702 applications (MICE) .20 Bibliography23 BS EN 60794-3-30:200860794-3-30 IEC:2008 5 OPTICAL FIBRE CABLES Part 3-30: Outdoor cables Family specification for optical telecommunication cables for la

26、kes, river crossings and coastal application 1 Scope This family specification covers optical telecommunication cables to be used as underwater cables for lakes, river crossings and coastal applications. Requirements of the sectional specification IEC 60794-3 for duct, buried, aerial and lake, river

27、 crossings and coastal applications cables are applicable to cables covered by this standard. This standard does not cover methods of cable repair nor repair capability, nor does it cover cables for use with lake, river crossings and coastal applications line amplifiers. Clause 4 of this standard de

28、scribes a blank detail specification for optical telecommunication cables to be used for lakes, river crossings and coastal applications. It incorporates some minimum requirements. Annex A describes a blank detail specification which may be used to prepare detail specifications. Annex B describes th

29、e cable construction. Annex C describes a blank detail specification for ISO/IEC 24702 applications (MICE). The parameters specified in this standard may be affected by measurement uncertainty arising either from measurement errors or calibration errors due to lack of suitable standards. Acceptance

30、criteria are interpreted with respect to this consideration (see IEC 60794-3, Clause 9). The number of fibres tested should be representative of the cable design and should be agreed between the customer and the supplier. 2 Normative references The following referenced documents are indispensable fo

31、r the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. They complete the normative references already listed in the generic specification (IEC 60794-1-1, Claus

32、e 2 and IEC 60794-1-2, Clause 2) and in the sectional specification (IEC 60794-3, Clause 2). IEC 60793-1-48, Optical fibres Part 1-48: Measurement methods and test procedures Polarization mode dispersion IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for cla

33、ss B single-mode fibres BS EN 60794-3-30:2008 6 60794-3-30 IEC:2008 3 Symbols and abbreviations For the purposes of this document, the following symbols and abbreviations apply. cccabled fibre cut-off wavelength operationaloperational wavelength d nominal outer diameter of the cable DS detail specif

34、ication TLlong term tensile load TMthe acceptable amount of short-term tensile load that can be applied to the cable without permanent degradation of the characteristics of the fibres in the tensile performance test TA1temperature cycling test low-temperature limit according to IEC 60794-1-2, Method

35、 F1 TA2temperature cycling test low-temperature limit according to IEC 60794-1-2, Method F1 TB1temperature cycling test high-temperature limit according to IEC 60794-1-2, Method F1 TB2temperature cycling test high-temperature limit according to IEC 60794-1-2, Method F1 t1temperature cycling test dwe

36、ll time n d a value times cable outer diameter used for bends, mandrels, etc. 4 Family specification for optical telecommunication cables to be used in lakes, river crossings and coastal application (blank detail specification and minimum requirements) 4.1 Optical fibres Attenuation values at 1 625

37、nm are optionally specified by the user. 4.1.1 Single-mode dispersion unshifted (B1.1) optical fibre Characteristics (9) IEC 60794-3 Clause/sub- clause (10) Family requirements (11) Test methods (12) Remarks (13) Uncabled optical fibre 5.1 IEC 60793-2-50 Attenuation coefficient (cabled fibres) 5.2 A

38、ccording DS IEC 60793-1-40 at 1 310 nm at 1 550 nm at 1 625 nm 5.2.1 0,40 dB/km 0,30 dB/km 0,40 dB/km 1 625 nm performance is optional depending on agreement between customer and supplier Attenuation discontinuities at 1 310 and 1 550 nm 5.2.2 0,10 dB IEC 60793-1-40 BS EN 60794-3-30:200860794-3-30 I

39、EC:2008 7 Characteristics (9) IEC 60794-3 Clause/sub- clause (10) Family requirements (11) Test methods (12) Remarks (13) Cabled fibre cut-off wavelength 5.3 cc30. Duration of cycle: 10 s. 4.4.2.3 Impact8H a) Family requirements There shall be no change in attenuation at 1 550 nm after the test. For

40、 1 625 nm applications, performance criteria shall be mutually agreed upon between the customer and supplier. BS EN 60794-3-30:2008 14 60794-3-30 IEC:2008 Under visual examination without magnification there shall be no damage to the sheath or to the cable elements. The imprint of the striking surfa

41、ce on the sheath is not considered mechanical damage. b) Test conditions Striking face radius: 10 mm to 300 mm. Diameter of steel base: 50 mm. Impact energy: 50 J. Number of impacts: 3 in 3 different locations spaced not less than 500 mm apart. 4.4.2.4 Torsion a) Family requirements Under considerat

42、ion. b) Test conditions Under consideration. 4.4.2.5 Cable bend9H a) Family requirements There shall be no change in attenuation at 1 550 nm after the test. For 1 625 nm applications, performance criteria shall be mutually agreed upon between the customer and the supplier. The same acceptance criter

43、ia shall apply when the bend test is carried out at low temperature in accordance with particular user conditions. b) Test conditions Diameter of mandrel: minimum cable bending diameter. Number of turns/helix: 4. Number of cycles: 3 to 6 depending on user requirements. 4.4.2.6 Crush10H a) Family req

44、uirements Under load there shall be no increase in attenuation in the 1 550 nm region. For 1 625 nm applications, performance criteria shall be mutually agreed upon between the customer and supplier. Under visual examination there shall be no damage to the sheath or to the cable elements. The imprin

45、t of the plate or mandrel on the sheath is not considered mechanical damage. NOTE It is recommended that additional testing considerations, such as the number of positions that the load is applied to the test specimen are defined. b) Test conditions Load (plate/plate): 10 kN. and/or Load (mandrel/pl

46、ate): 2,5 kN. Duration of load: 15 min. 4.4.2.7 Temperature cycling11H a) Family requirements For TA1to TB1there shall be no change in attenuation at 1 550 nm. For 1 625 nm applications, performance criteria shall be mutually agreed upon between the customer and the supplier. The ambient temperature

47、 is the reference temperature for the test. BS EN 60794-3-30:200860794-3-30 IEC:2008 15 For TA1to TA2and TB1to TB2, the change in attenuation coefficient shall be lower than 0,15 dB/km at 1 550 nm. On completion of the test, there shall be no change in attenuation. For 1 625 nm applications, perform

48、ance criteria shall be mutually agreed upon between the customer and the supplier. b) Test conditions Sample length: finished cable length of at least 1 000 m. High temperature, TB2: + 60 C to + 70 C depending on user requirements. High temperature, TB1: + 30 C to + 60 C depending on user requiremen

49、ts. Low temperature, TA1: 10 C. Low temperature, TA2: 10 C to 40 C or 45 C, depending on user requirements. Rate of heating and cooling: sufficiently slow so that the effect of changing the temperature does not cause temperature shock. t1: temperature cycling test dwell time. Number of cycles: 2, but additional cycles may be required in accordance with particular user requirements. 4.4.2.8 Hydrostatic pressure12H a) Famil