EN 60335-2-29-2004 en Household and similar electrical appliances C Safety Part 2-29 Particular requirements for battery chargers (Incorporates Amendment A2 2010)《家用和类似用途电器的安全 第2-2.pdf

《EN 60335-2-29-2004 en Household and similar electrical appliances C Safety Part 2-29 Particular requirements for battery chargers (Incorporates Amendment A2 2010)《家用和类似用途电器的安全 第2-2.pdf》由会员分享，可在线阅读，更多相关《EN 60335-2-29-2004 en Household and similar electrical appliances C Safety Part 2-29 Particular requirements for battery chargers (Incorporates Amendment A2 2010)《家用和类似用途电器的安全 第2-2.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60335-2-29:2004 Incorporating Corrigendum No. 1 Household and similar electrical appliances Safety Part 2-29: Particular requirements for battery chargers ICS 29.200; 97.180 +A2:2010 National foreword This British Standard is the UK implementation of EN 60335-2-29:2004+A2:2010

2、. It is identical to IEC 60335-2-29:2002, incorporating amendments 1:2004 and 2:2009. It supersedes BS EN 60335-2-29:2004, which will be withdrawn on 1 February 2015. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text

3、 carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“. The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/01, Motorised appliance group. A

4、 list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity f

5、rom legal obligations. BS EN 60335-2-29:2004+A2:2010 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 6 December 2004 BSI 2010 Amendments/corrigenda issued since publication Amd. No. Date Comments 15663 Corrigendum No. 1 16 May 2005 Incorporat

6、ion of IEC amendment A1:2004 15769 26 August 2005 Adoption of consolidated IEC edition 31 May 2010 Implementation of IEC amendment 2:2009 with CENELEC endorsement A2:2010 ISBN 978 0 580 65770 2EUROPEAN STANDARD EN 60335-2-29 NORME EUROPENNE EUROPISCHE NORM CENELEC European Committee for Electrotechn

7、ical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN

8、60335-2-29:2004 E ICS 29.200;97.180 Supersedes EN 60335-2-29:1996 + A11:1997English version Household and similar electrical appliances Safety Part 2-29: Particular requirements for battery chargers (IEC 60335-2-29:2002 + A1:2004, A2:2009) Appareils lectrodomestiques et analogues Scurit Partie 2-29:

9、 Rgles particulires pour les chargeurs de batterie (CEI 60335-2-29:2002 + A1:2004, Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-29: Besondere Anforderungen fr Batterieladegerte (IEC 60335-2-29:2002 + A1:2004 This European Standard was approved by CENELEC on 2004-07-06.

10、 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained

11、 on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central

12、Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

13、 Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. :2004+A2 February 2010 A2:2009) ,A2:2009)Foreword The text of document 61/2169/FDIS, future fourth edition of IEC 60335-2-29, and the text of document 61/2536/FDIS, future amendment to the International Sta

14、ndard, prepared by the IEC Technical Committee 61, were submitted to the IEC-CENELEC parallel vote. The texts of IEC 60335-2-29:2002 and A1:2004 were approved by CENELEC as a new edition of EN 60335-2-29 on 2004-07-06. This European Standard replaces EN 60335-2-29:1996 + corrigendum November 2001 +

15、A11:1997. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-12-01 - date on which national standards (dow) 2007-06-01 This part 2 has to be used in conjunction with E

16、N 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in

17、the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for electric battery chargers. When a particular subclause of Part 1 is not mentioned in this part 2, that su

18、bclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional

19、 to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; - additional annexes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC stand

20、ard are prefixed with the letter Z. NOTE 2 The following print types are used: - requirements: in roman type; - test specifications: in italic type; - notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associa

21、ted noun are also in bold. Special national conditions causing a deviation from this European Standard are listed in annex ZA and are in addition to those in EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. p NOTE In this do

22、cument, p is used in the margin to indicate instructions for preparing the printed version. _ conflicting with the EN have to be withdrawn 2 BS EN 60335-2-29:2004+A2:2010 EN 60335-2-29:2004+A2:2010 (E) Foreword to amendment A2 The text of document 61/3914/FDIS, future amendment 2 to IEC 60335-2-29:2

23、002, prepared by IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to EN 60335-2-29:2004 on 2010-02-01. Attention is drawn to the possibility that some of the elements of this

24、document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates are applicable: - latest date by which the amendment has to be implemented at national level by publication of an identical national standard

25、 or by endorsement (dop) 2010-11-01 - date on which national standards conflicting with the amendment have to be withdrawn (dow) 2015-02-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-29:2004. There are no special national conditions causing a deviation from this a

26、mendment. There are no national deviations from this amendment. p NOTE In this document, p is used in the margin to indicate instructions for preparing the printed version. _ Endorsement notice The text of amendment 2:2009 to the International Standard IEC 60335-2-29:2002 was approved by CENELEC as

27、an amendment to the European Standard without any modification. _ 3 BS EN 60335-2-29:2004+A2:2010 EN 60335-2-29:2004+A2:2010 (E) CONTENTS INTRODUCTION 1 Scope 2 Normative references 3 Definitions . 4 General requiremen . 5 General conditions for the tests . 6 Classification . 7 Marking and instructi

28、ons 8 Protection against access to live parts . 9 Starting of motor-operated appliances . 10 Power input and current. 11 Heating. . 12 Void . 13 Leakage current and electric strength at operating temperature. 14 Transient overvoltages . . 15 Moisture resistance . 1 16 Leakage current and electric st

29、rength 1 17 Overload protection of transformers and associated circuits 11 18 Endurance . 1 19 Abnormal operation . 1 20 Stability and mechanical hazards. 1 2 21 Mechanical strength 1 22 Construction 1 23 Internal wiring 1 24 Components 1 25 Supply connection and external flexible cords 1 26 Termina

30、ls for external conductors 1 27 Provision for earthing 1 28 Screws and connections 1 29 Clearances, creepage distances and solid insulation . 1 30 Resistance to heat and fire 1 31 Resistance to rusting . 1 32 Radiation, toxicity and similar hazards . 1 Annexes 1 Annex A (informative) Routine tests .

31、 1 Annex AA (normative) Battery chargers for use by children 1Bibliography 2 Annex ZC (normative) Normative references to international publications with their 22. Annex ZA (informative) Special national conditions . . 22corresponding European publications 5 6 7 7 8 8 8 8 9 10 10 10 10 10 10 1 1 1 1

32、 2 2 3 3 3 4 4 4 4 4 4 4 6 6 7 1 4 BS EN 60335-2-29:2004+A2:2010 EN 60335-2-29:2004+A2:2010 (E) 5 INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recogn

33、izes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and t

34、akes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. Howeve

35、r, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the

36、 other is taken into account. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requiremen

37、ts. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard.

38、An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that th

39、e risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of

40、 the International Standard IEC 60335-2-29:2002 + A1:2004 was approved by CENELEC as a European Standard without any modification. # $ When a part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committee

41、s responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedenceover horizont

42、al and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of te

43、mperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards. BS EN 60335-2-29:2004+A2:2010 EN 60335-2-29:2004+A2:2010 (E) HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-29: Pa

44、rticular requirements for battery chargers 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric battery chargers for household and similar use having an output at safety extra-low voltage, their rated voltage being not more than 25

45、0 V. Battery chargers not intended for normal household use, but which nevertheless may be a source of danger to the public, such as battery chargers intended for use in garages, shops, light industry and on farms, are within the scope of this standard. As far as is practicable, this standard deals

46、with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account NOTE 101 Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional require

47、ments may be necessary; in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 102 This standard does not apply to built-in battery chargers, except those for installi

48、ng in caravans and similar vehicles; battery chargers that are part of an appliance, the battery of which is not accessible to the user; battery chargers intended exclusively for industrial purposes; battery chargers intended to be used in locations where special conditions prevail, such as the pres

49、ence of a corrosive or explosive atmosphere (dust, vapour or gas); supply units for electronic equipment; battery chargers and supply units for electronic flash apparatus for photographic purposes (IEC 60491); battery chargers intended for use in electric vehicles (IEC 61851). NOTE 103 Requirements for battery chargers for use by children at least 8 years old without supervision are given