EN 60317-72-2017 en Specifications for particular types of winding wires - Part 72 Polyester glass-fibre wound fused silicone resin or varnish impregnated bare or enamelled round c.pdf

《EN 60317-72-2017 en Specifications for particular types of winding wires - Part 72 Polyester glass-fibre wound fused silicone resin or varnish impregnated bare or enamelled round c.pdf》由会员分享，可在线阅读，更多相关《EN 60317-72-2017 en Specifications for particular types of winding wires - Part 72 Polyester glass-fibre wound fused silicone resin or varnish impregnated bare or enamelled round c.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、Specifications for particular types of winding wiresPart 72: Polyester glass-fibre wound unvarnished and fused or resin/varnish impregnated, bare of enamelled round copper wire temperature index 200 (IEC 60317-72:2017)BS EN 60317-72:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd

2、1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60317-72 August 2017 ICS 29.060.10 English Version Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound fused, silicone resin or varnish impregnated, bare or enamelled round copper wire, tem

3、perature index 200 (IEC 60317-72:2017) Spcifications pour types particuliers de fils de bobinage - Partie 72: Fil de section circulaire en cuivre nu ou maill, guip de fibres de verre polyester fondues, imprgnes de vernis ou de rsine silicone, dindice de temprature 200 (IEC 60317-72:2017) Technische

4、Lieferbedingungen fr bestimmte Typen von Wickeldrhten - Teil 72: Mit Polyesterglasfaser umwickelter, unbehandelter und eingegossener, mit Harz oder Lack imprgnierter blanker oder lackisolierter Runddraht aus Kupfer der Klasse 200 (IEC 60317-72:2017) This European Standard was approved by CENELEC on

5、2017-06-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may

6、be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and not

7、ified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,

8、 Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normali

9、sation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60317-72:2017 E National forewordThis Bri

10、tish Standard is the UK implementation of EN 60317-72:2017. It is identical to IEC 60317-72:2017.The UK participation in its preparation was entrusted to Technical Committee L/-/99, Miscellaneous Standards - Electrical.A list of organizations represented on this committee can be obtained on request

11、to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90552 0ICS 29.060.10Compliance with a British Stan

12、dard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60317-72:2017EUROPEAN STANDARD NORME EU

13、ROPENNE EUROPISCHE NORM EN 60317-72 August 2017 ICS 29.060.10 English Version Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound fused, silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-72:2017) Spcif

14、ications pour types particuliers de fils de bobinage - Partie 72: Fil de section circulaire en cuivre nu ou maill, guip de fibres de verre polyester fondues, imprgnes de vernis ou de rsine silicone, dindice de temprature 200 (IEC 60317-72:2017) Technische Lieferbedingungen fr bestimmte Typen von Wic

15、keldrhten - Teil 72: Mit Polyesterglasfaser umwickelter, unbehandelter und eingegossener, mit Harz oder Lack imprgnierter blanker oder lackisolierter Runddraht aus Kupfer der Klasse 200 (IEC 60317-72:2017) This European Standard was approved by CENELEC on 2017-06-13. CENELEC members are bound to com

16、ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELE

17、C Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre h

18、as the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, L

19、atvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee

20、fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60317-72:2017 E BS EN 60317-72:2017EN 60317-72:2017 2 European foreword The text of d

21、ocument 55/1604/FDIS, future edition 1 of IEC 60317-72, prepared by IEC/TC 55 “Winding wires“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-72:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by public

22、ation of an identical national standard or by endorsement (dop) 2018-03-13 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-13 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rig

23、hts. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60317-72:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note

24、s have to be added for the standards indicated: IEC 60264 NOTE Harmonized in EN 60264 series. IEC 60317 NOTE Harmonized in EN 60317 series. IEC 60851 NOTE Harmonized in EN 60851 series. BS EN 60317-72:2017EN 60317-72:2017 2 European foreword The text of document 55/1604/FDIS, future edition 1 of IEC

25、 60317-72, prepared by IEC/TC 55 “Winding wires“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-72:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by

26、 endorsement (dop) 2018-03-13 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-13 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible fo

27、r identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60317-72:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicate

28、d: IEC 60264 NOTE Harmonized in EN 60264 series. IEC 60317 NOTE Harmonized in EN 60317 series. IEC 60851 NOTE Harmonized in EN 60851 series. EN 60317-72:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documen

29、ts are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an Int

30、ernational Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60317-0-10 20

31、17 Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire EN 60317-0-10 2017 BS EN 60317-72:2017This page deliberately left blank 2 IEC 60317-72:2017

32、 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions, general notes and appearance . 6 3.1 Terms and definitions 6 3.2 General notes . 6 3.2.1 Methods of test 6 3.2.2 Winding wire 6 3.3 Appearance 7 4 Dimensions 7 5 Electrical resistance 7 6 Elonga

33、tion . 7 7 Springiness . 7 8 Flexibility and adherence . 7 9 Heat shock 7 10 Cut-through . 7 11 Resistance to abrasion 8 12 Resistance to solvents . 8 13 Breakdown voltage 8 14 Continuity of insulation 8 15 Temperature index 8 16 Resistance to refrigerants 8 17 Solderability 8 18 Heat or solvent bon

34、ding . 8 19 Dielectric dissipation factor 8 20 Resistance to transformer oil . 8 21 Loss of mass . 8 23 Pin hole test 8 30 Packaging . 9 Bibliography 10 2 IEC 60317-72:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions, general notes and appe

35、arance . 6 3.1 Terms and definitions 6 3.2 General notes . 6 3.2.1 Methods of test 6 3.2.2 Winding wire 6 3.3 Appearance 7 4 Dimensions 7 5 Electrical resistance 7 6 Elongation . 7 7 Springiness . 7 8 Flexibility and adherence . 7 9 Heat shock 7 10 Cut-through . 7 11 Resistance to abrasion 8 12 Resi

36、stance to solvents . 8 13 Breakdown voltage 8 14 Continuity of insulation 8 15 Temperature index 8 16 Resistance to refrigerants 8 17 Solderability 8 18 Heat or solvent bonding . 8 19 Dielectric dissipation factor 8 20 Resistance to transformer oil . 8 21 Loss of mass . 8 23 Pin hole test 8 30 Packa

37、ging . 9 Bibliography 10 BS EN 60317-72:2017IEC 60317-72:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 72: Polyester glass-fibre wound fused, silicone resin or varnish impregnated, bare or enamelled round copper wire, temperatur

38、e index 200 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardiz

39、ation in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is

40、 entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the I

41、nternational Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects si

42、nce each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical conten

43、t of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible

44、 in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

45、assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors,

46、employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out o

47、f the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to

48、the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60317-72 has been prepared by IEC technical committee 55: Winding wires. The text of this

49、 standard is based on the following documents: FDIS Report on voting 55/1604/FDIS 55/1611/RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60317 series, published under the general title Specifications for particular types of winding wires, can be found on the IEC website. BS EN 60317-72:2017IEC 6031