EN 60317-71-2017 en Specifications for particular types of winding wires - Part 71 Polyester glass-fibre wound fused and resin or varnish impregnated bare or enamelled round copper.pdf

《EN 60317-71-2017 en Specifications for particular types of winding wires - Part 71 Polyester glass-fibre wound fused and resin or varnish impregnated bare or enamelled round copper.pdf》由会员分享，可在线阅读，更多相关《EN 60317-71-2017 en Specifications for particular types of winding wires - Part 71 Polyester glass-fibre wound fused and resin or varnish impregnated bare or enamelled round copper.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、Specifications for particular types of winding wiresPart 71: Polyester glass-fibre wound fused and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 (IEC 60317-71:2017)BS EN 60317-71:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/201

2、3 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60317-71 August 2017 ICS 29.060.10 English Version Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound fused and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 18

3、0 (IEC 60317-71:2017) Spcifications pour types particuliers de fils de bobinage - Partie 71: Fil de section circulaire en cuivre nu ou maill, guip de fibres de verre polyester, fondues et imprgnes de vernis ou de rsine, dindice de temprature 180 (IEC 60317-71:2017) Technische Lieferbedingungen fr be

4、stimmte Typen von Wickeldrhten - Teil 71: Mit unbeschichteten Polyesterglasfasern umwickelt und verschmolzen oder mit Harz oder Lack imprgnierter blanker oder lackisolierter Runddraht aus Kupfer der Klasse 180 (IEC 60317-71:2017) This European Standard was approved by CENELEC on 2017-06-08. CENELEC

5、members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appli

6、cation to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CEN

7、ELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ic

8、eland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechni

9、que Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60317-71:2017 E National forewordThis British Standard is the

10、 UK implementation of EN 60317-71:2017. It is identical to IEC 60317-71:2017.The UK participation in its preparation was entrusted to Technical Committee L/-/99, Miscellaneous Standards - Electrical.A list of organizations represented on this committee can be obtained on request to its secretary.Thi

11、s publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90551 3ICS 29.060.10Compliance with a British Standard cannot confer i

12、mmunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 6031771:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NO

13、RM EN 60317-71 August 2017 ICS 29.060.10 English Version Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound fused and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 (IEC 60317-71:2017) Spcifications pour types particu

14、liers de fils de bobinage - Partie 71: Fil de section circulaire en cuivre nu ou maill, guip de fibres de verre polyester, fondues et imprgnes de vernis ou de rsine, dindice de temprature 180 (IEC 60317-71:2017) Technische Lieferbedingungen fr bestimmte Typen von Wickeldrhten - Teil 71: Mit unbeschi

15、chteten Polyesterglasfasern umwickelt und verschmolzen oder mit Harz oder Lack imprgnierter blanker oder lackisolierter Runddraht aus Kupfer der Klasse 180 (IEC 60317-71:2017) This European Standard was approved by CENELEC on 2017-06-08. CENELEC members are bound to comply with the CEN/CENELEC Inter

16、nal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any

17、CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the offi

18、cial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

19、Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung C

20、EN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60317-71:2017 E BS EN 6031771:2017EN 60317-71:2017 2 European foreword The text of document 55/1603/FDIS, future ed

21、ition 1 of IEC 60317-71, prepared by IEC/TC 55 “Winding wires“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-71:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national

22、standard or by endorsement (dop) 2018-03-08 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-08 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held

23、responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60317-71:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the stan

24、dards indicated: IEC 60264 NOTE Harmonized in EN 60264 series. IEC 60317 NOTE Harmonized in EN 60317 series. IEC 60851 NOTE Harmonized in EN 60851 series. BS EN 6031771:2017EN 60317-71:2017 2 European foreword The text of document 55/1603/FDIS, future edition 1 of IEC 60317-71, prepared by IEC/TC 55

25、 “Winding wires“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-71:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-08 la

26、test date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-08 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such pa

27、tent rights. Endorsement notice The text of the International Standard IEC 60317-71:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60264 NOTE Harmonized in

28、EN 60264 series. IEC 60317 NOTE Harmonized in EN 60317 series. IEC 60851 NOTE Harmonized in EN 60851 series. EN 60317-71:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text i

29、n such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been

30、modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60317-0-10 2017 Specifications for particular

31、 types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire EN 60317-0-10 2017 BS EN 6031771:2017This page deliberately left blank 2 IEC 60317-71:2017 IEC 2017 CONTENTS FOREWORD . 3 I

32、NTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions, general notes and appearance . 6 3.1 Terms and definitions 6 3.2 General notes . 6 3.2.1 Methods of test 6 3.2.2 Winding wire 6 3.3 Appearance 7 4 Dimensions 7 5 Electrical resistance 7 6 Elongation . 7 7 Springiness . 7 8 Flex

33、ibility and adherence . 7 9 Heat shock 7 10 Cut-through . 7 11 Resistance to abrasion 8 12 Resistance to solvents . 8 13 Breakdown voltage 8 14 Continuity of insulation 8 15 Temperature index 8 16 Resistance to refrigerants 8 17 Solderability 8 18 Heat or solvent bonding . 8 19 Dielectric dissipatio

34、n factor 8 20 Resistance to transformer oil . 8 21 Loss of mass . 8 23 Pin hole test 8 30 Packaging . 9 Bibliography 10 2 IEC 60317-71:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions, general notes and appearance . 6 3.1 Terms and definiti

35、ons 6 3.2 General notes . 6 3.2.1 Methods of test 6 3.2.2 Winding wire 6 3.3 Appearance 7 4 Dimensions 7 5 Electrical resistance 7 6 Elongation . 7 7 Springiness . 7 8 Flexibility and adherence . 7 9 Heat shock 7 10 Cut-through . 7 11 Resistance to abrasion 8 12 Resistance to solvents . 8 13 Breakdo

36、wn voltage 8 14 Continuity of insulation 8 15 Temperature index 8 16 Resistance to refrigerants 8 17 Solderability 8 18 Heat or solvent bonding . 8 19 Dielectric dissipation factor 8 20 Resistance to transformer oil . 8 21 Loss of mass . 8 23 Pin hole test 8 30 Packaging . 9 Bibliography 10 BS EN 60

37、31771:2017IEC 60317-71:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 71: Polyester glass-fibre wound fused and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 FOREWORD 1) The Internationa

38、l Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic f

39、ields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any

40、IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardiz

41、ation (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has represe

42、ntation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC c

43、annot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publicat

44、ions. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas,

45、access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including

46、individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance u

47、pon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the element

48、s of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60317-71 has been prepared by IEC technical committee 55: Winding wires. The text of this standard is based on the following docu

49、ments: FDIS Report on voting 55/1603/FDIS 55/1610/RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN 6031771:2017IEC 60317-71:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 71: Polyester glass-fibre wound fused and resin or varnish