EN 60286-1-2017 en Packaging of components for automatic handling - Part 1 Tape packaging of components with axial leads on continuous tapes.pdf

《EN 60286-1-2017 en Packaging of components for automatic handling - Part 1 Tape packaging of components with axial leads on continuous tapes.pdf》由会员分享，可在线阅读，更多相关《EN 60286-1-2017 en Packaging of components for automatic handling - Part 1 Tape packaging of components with axial leads on continuous tapes.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Packaging of components for automatic handlingPart 1: Tape packaging of components with axial leads on continuous tapesBS EN 60286-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60286-1 November 2017 ICS 31.

2、020; 31.240 Supersedes EN 60286-1:1998 English Version Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (IEC 60286-1:2017) Emballage des composants pour oprations automatises - Partie 1: Emballage des composants sorties axiale

3、s en bandes continues (IEC 60286-1:2017) Gurtung und Magazinierung von Bauelementen fr automatische Verarbeitung - Teil 1: Gurtung von Bauelementen mit axialen Anschlssen (IEC 60286-1:2017) This European Standard was approved by CENELEC on 2017-08-30. CENELEC members are bound to comply with the CEN

4、/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Cen

5、tre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same stat

6、us as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania

7、, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechni

8、sche Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60286-1:2017 E National forewordThis British Standard is the UK implementation of EN 60286-1:2017. It

9、 is identical to IEC 60286-1:2017. It supersedes BS EN 60286-1:1998, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/40X, Capacitors and resistors for electronic equipment.A list of organizations represented on this committee can be obtained on req

10、uest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 96274 5ICS 55.060; 31.020Compliance with a Br

11、itish Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60286-1:2017EUROPEAN STANDARD

12、NORME EUROPENNE EUROPISCHE NORM EN 60286-1 November 2017 ICS 31.020; 31.240 Supersedes EN 60286-1:1998 English Version Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (IEC 60286-1:2017) Emballage des composants pour oprations

13、 automatises - Partie 1: Emballage des composants sorties axiales en bandes continues (IEC 60286-1:2017) Gurtung und Magazinierung von Bauelementen fr automatische Verarbeitung - Teil 1: Gurtung von Bauelementen mit axialen Anschlssen (IEC 60286-1:2017) This European Standard was approved by CENELEC

14、 on 2017-08-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards

15、may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and

16、 notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germ

17、any, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Nor

18、malisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60286-1:2017 E BS EN 60286-1:2017EN 6

19、0286-1:2017 2 European foreword The text of document 40/2538/FDIS, future edition 3 of IEC 60286-1, prepared by IEC/TC 40 “Capacitors and resistors for electronic equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60286-1:2017. The following dates are fixed: late

20、st date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-05-30 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-08-30 This document supersedes EN 60286-

21、1:1998. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60286-1:2017 was approved b

22、y CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60286-2 NOTE Harmonized as EN 60286-2. IEC 60286-3 NOTE Harmonized as EN 60286-3. IEC 60301 NOTE Harmonized as EN 60301. BS EN 6

23、0286-1:2017EN 60286-1:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated

24、 references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-dat

25、e information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60294 - Measurement of the dimensions of a cylindrical component with axial terminations EN 60294 - ISO 11469 - Plastics - Generic identificati

26、on and marking of plastics products EN ISO 11469 - BS EN 60286-1:2017This page deliberately left blank 2 IEC 60286-1:2017 IEC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 Dimensions 5 4.1 Dimensions common to tapes and taped components with axial leads 5

27、4.1.1 General . 5 4.1.2 Body location (permissible lateral deviation) 7 4.1.3 Tape spacing . 7 4.2 Taping 7 4.2.1 General . 7 4.2.2 Orientation of polarized components 8 4.2.3 Position, kinks and bends of the leads . 8 4.2.4 The ends of the leads 8 4.2.5 Holding in the tape 8 4.2.6 Requirements of t

28、ape material, storage, and handling . 8 4.2.7 Splices of tape . 8 4.2.8 Leader tape . 8 5 Packing . 8 5.1 General . 8 5.2 Dimensions of the reel 9 5.3 Distances W1and W2. 9 5.4 Recycling 9 5.5 Protection of components . 9 5.6 Reel filling . 9 5.7 Dimensions of the fan-fold container . 10 5.8 Missing

29、 components . 10 6 Marking . 10 Annex A (informative) Cross-reference for references to the previous edition of this document 11 Bibliography 12 Figure 1 Dimensions for tape packaging of components with axial leads 6 Figure 2 Reel dimensions 9 Figure 3 Outer dimensions of the fan-fold arrangement 10

30、 Table 1 Tape widths and permissible variation . 6 Table 2 Component spacing and permissible deviation 7 Table 3 Tape spacing. 7 Table A.1 Cross-reference to clauses 11 2 IEC 60286-1:2017 IEC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 Dimensions 5 4.1 D

31、imensions common to tapes and taped components with axial leads 5 4.1.1 General . 5 4.1.2 Body location (permissible lateral deviation) 7 4.1.3 Tape spacing . 7 4.2 Taping 7 4.2.1 General . 7 4.2.2 Orientation of polarized components 8 4.2.3 Position, kinks and bends of the leads . 8 4.2.4 The ends

32、of the leads 8 4.2.5 Holding in the tape 8 4.2.6 Requirements of tape material, storage, and handling . 8 4.2.7 Splices of tape . 8 4.2.8 Leader tape . 8 5 Packing . 8 5.1 General . 8 5.2 Dimensions of the reel 9 5.3 Distances W1and W2. 9 5.4 Recycling 9 5.5 Protection of components . 9 5.6 Reel fil

33、ling . 9 5.7 Dimensions of the fan-fold container . 10 5.8 Missing components . 10 6 Marking . 10 Annex A (informative) Cross-reference for references to the previous edition of this document 11 Bibliography 12 Figure 1 Dimensions for tape packaging of components with axial leads 6 Figure 2 Reel dim

34、ensions 9 Figure 3 Outer dimensions of the fan-fold arrangement 10 Table 1 Tape widths and permissible variation . 6 Table 2 Component spacing and permissible deviation 7 Table 3 Tape spacing. 7 Table A.1 Cross-reference to clauses 11 BS EN 60286-1:2017IEC 60286-1:2017 IEC 2017 3 INTERNATIONAL ELECT

35、ROTECHNICAL COMMISSION _ PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING Part 1: Tape packaging of components with axial leads on continuous tapes FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical c

36、ommittees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Techn

37、ical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmen

38、tal and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or ag

39、reements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international us

40、e and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to prom

41、ote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indic

42、ated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6)

43、 All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damag

44、e or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publi

45、cation. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all su

46、ch patent rights. International Standard IEC 60286-1 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This third edition cancels and replaces the second edition published in 1997. This edition constitutes a technical revision. This edition includes

47、the following significant changes with respect to the previous edition: a) a complete revision of the structure (detailed in Annex A) and reworked layout. BS EN 60286-1:2017 4 IEC 60286-1:2017 IEC 2017 The text of this International Standard is based on the following documents: FDIS Report on voting

48、 40/2538/FDIS 40/2552/RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 60286 series, u

49、nder the general title Packaging of components for automatic handling, can be found on the IEC website. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a l