EN 60127-4-2005 en Miniature fuses Part 4 Universal modular fuse-links (UMF) C Through-hole and surface mount types (Incorporates Amendment A2 2013)《微型熔断器 第4部分 通用模块熔断体(UMF) 通孔和表面安装.pdf

《EN 60127-4-2005 en Miniature fuses Part 4 Universal modular fuse-links (UMF) C Through-hole and surface mount types (Incorporates Amendment A2 2013)《微型熔断器 第4部分 通用模块熔断体(UMF) 通孔和表面安装.pdf》由会员分享，可在线阅读，更多相关《EN 60127-4-2005 en Miniature fuses Part 4 Universal modular fuse-links (UMF) C Through-hole and surface mount types (Incorporates Amendment A2 2013)《微型熔断器 第4部分 通用模块熔断体(UMF) 通孔和表面安装.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 60127-4:2005+A1:2009Miniature fusesPart 4: Universal modular fuse-links (UMF) T hrough-hole and surface mount typesICS 29.120.50 BS EN +A2:2013BS EN 60127-4:2005+A2:2013ISBN 978 0 580 78201 5Amendments/corrigenda issued since publicationDate Comments30 April 2009 Implementation

2、 of IEC amendment 1:2008 with CENELEC endorsement A1:200931 July 2013 Implementation of IEC amendment 2:2012 with CENELEC endorsement A2:2013. Annex ZA updatedThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 14 November 2005 The British Standa

3、rds Institution 2013. Published by BSI Standards Limited 2013National forewordThis British Standard is the UK implementation of EN 60127-4:2005+A2:2013. It is identical to IEC 60127-4:2005, incorporating amendments 1:2008 and 2:2012. It supersedes BS EN 60127-4:2005+A1:2009, which will be withdrawn

4、on 11 January 2016.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by .The UK participation in its preparation was en

5、trusted to Technical Committee PEL/32, Fuses.A list of organizations represented on this committee can be obtained on request to its secretary.The publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a B

6、ritish Standard cannot confer immunity from legal obligations.EUROPEAN STANDARD EN 60127-4:2005+A1NORME EUROPENNE EUROPISCHE NORMFebruary 2009CENELEC European Committee forElectrotechnicalStandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung C

7、entral Secretariat:rue de Stassart35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELECmembers.Ref. No. EN 60127-4:2005 EICS 29.120.50 Supersedes EN 60127-4:1996 + A1:2002 + A2:2003English version Miniature fuses Part 4: Universal

8、 modular fuse-links (UMF) Through-hole and surface mount types (IEC 60127-4:2005)Coupe-circuit miniatures Partie 4: Elments de remplacementmodulaires universels (UMF) Types demontage ensurface et montage par trous (CEI 60127-4:2005)Gerteschutzsicherungen Teil 4: Welteinheitliche modulareSicherungsei

9、nstze (UMF) Bauarten fr Steck- und Oberflchenmontage(IEC 60127-4:2005)This European Standard was approved by CENELEC on 2005-03-01. CENELEC membersare bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national sta

10、ndard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any oth

11、erlanguage made by translation under the responsibility of aCENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committeesofAustria, Belgium,Cyprus, CzechRepublic, Denmark, Estonia

12、, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 60127-4:2005+A2June 2013Foreword The textofdocument 32C/362/FDIS, future edition 3

13、of IEC 60127-4, prepared by SC 32C, Miniature fuses, of IEC TC32, Fuses, was submitted to the IEC-CENELEC parallel vote and was approved byCENELEC asEN 60127-4 on 2005-03-01. This European Standard supersedes EN 60127-4:1996 + A1:2002 + A2:2003. The major technical changes with regard to the previou

14、sedition are as follows: introduction ofphysically smaller devices with lower rated voltages. Fuse-link temperature test (9.7) is modified. The clauses of this standard supplement, modifyor replacethe corresponding clauses in EN 60127-1. Where there is no corresponding clauseor subclause in this sta

15、ndard, the clause or subclause ofEN 60127-1 applies without modification as far as is reasonable. When this standard states “addition”, “modification” or “remplacement”, the relevant textin EN 60127-1 isto be adaptedaccordingly.The following dates were fixed: latest date bywhich the EN has to be imp

16、lemented at national level bypublication of an identical national standard or by endorsement (dop) 2005-12-01 latest date bywhich the national standards conflictingwith the EN have tobe withdrawn (dow) 2008-03-01 Annex ZA has been added by CENELEC. _ Endorsement noticeThe text of the International S

17、tandard IEC 60127-4:2005 was approved by CENELEC as a EuropeanStandardwithout any modification. In the official version, for Bibliography, the following noteshaveto be added for the standards indicated: IEC 60115-1 NOTE Harmonized as EN 60115-1:2001 (modified).IEC 61191-2 NOTE Harmonized as EN 61191

18、-2:1998 (notmodified).ISO 9453 NOTE Harmonized as EN 29453:1993 (notmodified)._ 2 Foreword to amendment A1The text of document 32C/411/FDIS, future amendment 1 to IEC 60127-4:2005, prepared by SC32C,Miniature fuses, of IEC TC 32, Fuses,was submitted to the IEC-CENELEC parallel vote and wasapproved b

19、y CENELEC as amendment A1 toEN 60127-4:2005 on 2009-02-01.The following dates were fixed: latest date bywhich the amendment has to beimplemented at national level bypublication ofan identical national standard or by endorsement (dop) 2009-11-01 latest date bywhich the national standards conflictingw

20、ith the amendment have tobe withdrawn (dow) 2012-02-01_Endorsement noticeThe text of amendment 1:2008 to the International Standard IEC 60127-4:2005 was approved byCENELEC as an amendment to the European Standard without any modification.In the official version, for Bibliography, the following note

21、has to be added for the standard indicated:IEC 61190-1-2 NOTE Harmonized as EN 61190-1-2:2007 (notmodified). _BS EN 60127-4:2005+A1:2009BS EN 60127-4:2005+A2:2013EN 60127-4:2005+A2:2013 - 2 -EN 60127-4:2005/A2:2013 - 2 - Foreword The text of document 32C/456/CDV, future amendment 2 to edition 3 of I

22、EC 60127-4, prepared by SC 32C “Miniature fuses“ of IEC/TC 32 “Fuses“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60127-4:2005/A2:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an ident

23、ical national standard or by endorsement (dop) 2013-12-21 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-01-11 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/

24、or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standa

25、rd IEC 60127-4:2005/A2:2012 was approved by CENELEC as a European Standard without any modification. BS EN 60127-4:2005+A2:2013EN 60127-4:2005+A2:2013- 3 -EN 60127-4:2005/A2:2013 - 2 - Foreword The text of document 32C/456/CDV, future amendment 2 to edition 3 of IEC 60127-4, prepared by SC 32C “Mini

26、ature fuses“ of IEC/TC 32 “Fuses“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60127-4:2005/A2:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorse

27、ment (dop) 2013-12-21 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-01-11 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible

28、 for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 60127-4:2005/A2:2012 was appr

29、oved by CENELEC as a European Standard without any modification. Foreword to amendment A2 3 CONTENTS INTRODUCTION41Scope and object52Normative references.53Terms and definitions.64General requirements.65Standard ratings.66Marking77General notes on tests.78Dimensions and construction89Electrical requ

30、irements.1110 Standard sheets.23Annex A (informative) Mounting for surface mount fuse-links27Bibliography.29Figure 1 Unique identifying symbol for UMFs .18Figure 2 Test board for through-hole fuse-links18Figure 3 Test board for surface mount fuse-links19Figure 4 Test fuse base.20Figure 5 Bending jig

31、 for surface mount fuse-links.21Figure 6 Test circuits for breaking capacity tests22Table 1 Maximum values of voltage drop and sustained dissipation14Table 2 Testing schedule for individual ampere ratings.15Table 3 Testing schedule for maximum ampere rating of a homogeneous series.16Table 4 Testing

32、schedule for minimum ampere rating of a homogeneous series17Annex ZA (normative) Normative references to international publications withtheir correspondending European publications.30BS EN 60127-4:2005+A1:2009BS EN 60127-4:2005+A2:2013EN 60127-4:2005+A2:2013 - 4 -566777889122428303119192021222315161

33、718 4 INTRODUCTION The trend towards miniaturization of electronic equipment has caused users to require fuse-links of small dimensions, and of appropriate design for application to printed circuit boards or other substrate systems, possibly by automatic means. These fuse-links should be designed to

34、 incorporate a degree of non-interchangeability. Rated voltages of 12,5 V, 25 V, 32 V, 50 V, 63 V, 125 V, and 250 V are specified together with the following characteristics: very quick acting (FF), quick acting (F), time-lag (T) and long time-lag (TT). Because of the increasing importance of limita

35、tion of transient overvoltages in new technology, recommendations are included for limits to the overvoltages produced by these fuses under specified test conditions related to typical circuit configurations. The option is given to specify the breaking capacity with alternating current or direct cur

36、rent; it is considered that fuses that meet the d.c. requirement will meet the a.c. requirement; however, testing is required to validate this. Fuses may be dual rated, in which case the manufacturers literature should be referred to. The users of miniature fuses express the wish that all standards,

37、 recommendations and other documents relating to miniature fuses should have the same publication number in order to facilitate reference to fuses in other specifications, for example, equipment specifications. Furthermore, a single publication number and subdivision into parts would facilitate the

38、establishment of new standards, because clauses and subclauses containing general requirements need not be repeated. BS EN 60127-4:2005+A1:2009BS EN 60127-4:2005+A2:2013EN 60127-4:2005+A2:2013- 5 -Text deleted 5 MINIATURE FUSES Part 4: Universal modular fuse-links (UMF) Through-hole and surface moun

39、t types 1 Scope and object This part of IEC 60127 relates to universal modular fuse-links (UMF) for printed circuits and other substrate systems, used for the protection of electric appliances, electronic equipment, and component parts thereof, normally intended to be used indoors. It does not apply

40、 to fuse-links for appliances intended to be used under special conditions, such as in a corrosive or explosive atmosphere. These fuses are normally intended to be mounted or replaced only by appropriately skilled persons using specialized equipment. Fuse-links for use in fuse-holders are under cons

41、ideration. This standard applies in addition to the requirements of IEC 60127-1. The objectives of this part of IEC 60127 are as given in IEC 60127-1, with the additional requirement of a degree of non-interchangeability. 2 Normative references The following referenced documents are indispensable fo

42、r the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-20:1979, Basic environmental testing procedures Part 2: Tests Test T: Soldering Amendment 2

43、(1987)IEC 60068-2-21:1999, Environmental testing Part 2-21: Tests Test U: Robustness of terminations and integral mounting devicesIEC 60068-2-58:2004, Environmental testing Part 2-58: Tests Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of s

44、urface mounting devices (SMD) IEC 60127-1:1988, Miniature fuses Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links 1Amendment 1 (1999) Amendment 2 (2002) IEC 60194:1999, Printed board design, manufacture and assembly Terms and definitions_ 1There exists a conso

45、lidated version (2003). BS EN 60127-4:2005+A1:2009 5 MINIATURE FUSES Part 4: Universal modular fuse-links (UMF) Through-hole and surface mount types 1 Scope and object This part of IEC 60127 relates to universal modular fuse-links (UMF) for printed circuits and other substrate systems, used for the

46、protection of electric appliances, electronic equipment, and component parts thereof, normally intended to be used indoors. It does not apply to fuse-links for appliances intended to be used under special conditions, such as in a corrosive or explosive atmosphere. These fuses are normally intended t

47、o be mounted or replaced only by appropriately skilled persons using specialized equipment. Fuse-links for use in fuse-holders are under consideration. This standard applies in addition to the requirements of IEC 60127-1. The objectives of this part of IEC 60127 are as given in IEC 60127-1, with the

48、 additional requirement of a degree of non-interchangeability. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document

49、 (including any amendments) applies. IEC 60068-2-20:1979, Basic environmental testing procedures Part 2: Tests Test T: Soldering Amendment 2 (1987)IEC 60068-2-21:1999, Environmental testing Part 2-21: Tests Test U: Robustness of terminations and integral mounting devicesIEC 60068-2-58:2004, Environmental