EN 60061-1-1993 en Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1 Lamp caps (Incorporates Amendment A53 2015)《具有可互换性和安全性控制的带量规.pdf

《EN 60061-1-1993 en Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1 Lamp caps (Incorporates Amendment A53 2015)《具有可互换性和安全性控制的带量规.pdf》由会员分享，可在线阅读，更多相关《EN 60061-1-1993 en Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1 Lamp caps (Incorporates Amendment A53 2015)《具有可互换性和安全性控制的带量规.pdf（402页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60061-1: 1993Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp capsICS 29.140.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g5

2、5g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A4 20116:BS EN 60061-1: 1993+A50:20141993+A53:2015iThe numerical identification of the data sheets is achieved by the use of three numbers, which appear at the foot of each sheet, the significance of which is as follows.The Part of BS EN 600

3、61 in which they appear is identified by the first number, i.e.7004 Part 1 Lamp caps7005 Part 2 Lamp holders7006 Part 3 Gauges7007 Part 4 Guidelines and general informationThe sequence, which may not be continuous, in which data sheets appear is identified by the second number. The issue number of a

4、n individual data sheet is identified by the third number. For example, 7004-10-5 describes a B22 bayonet cap appearing in Part 1 of BS EN 60061, the current data sheets being the fifth issue.To facilitate reproduction, pages from IEC 60061-1 containing dual language text have been used in the produ

5、ction of this Part of BS EN 60061.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.The amendment by which each page of the Europe

6、an Standard wasintroduced is indicated by an extension to the shoulder heading at the topof the page (e.g. 60061-1 Amend. 49 (c) CEI/IEC:2013). Where no suchextension appears, the page is part of the original European Standard.BS EN 60061-1:1993+A50:2014BS EN 60061-1:1993+A53:2015ISBN 978 0 580 9186

7、6 7Amendments/corrigenda issued since publicationAmd. No. Date Comments9694 November 1997 See national foreword10186 February 1999 See national foreword10583 December 1999 See national foreword11008 July 2001 See national foreword13245 27 March 2002 See national foreword14106 9 January 2003 See nati

8、onal foreword14568 28 November 2003 See national foreword14961 25 February 2004 See national foreword15488 10 February 2005 See national foreword30 June 2010 Implementation of IEC amendments 36:2005, 37:2006, 38:2006, 39:2007, 40:2008, 41:2009 and 42:2009 with the corresponding CENELEC endorsements

9、A36:2005, A37:2006, A38:2007, A39:2009, A40:2008, A41:2009 and A42:200930 November 2011 Implementation of IEC amendments 43:2010, 44:2010, 45:2011 and 46:2011 with the corresponding CENELEC endorsements A43:2011, A44:2010, A45:2011 and A46:201130 April 2013 Implementation of IEC amendments 47:2012 a

10、nd 48:2012 with the corresponding CENELEC endorsements A47:2012 and A48:201230 June 2015 Implementation of IEC amendments 49:2013 and 50:2014 with corresponding CENELEC endorsements A49:2013 and A50:201431 March 2016 Implementation of IEC amendments 51:2014, 52:2015 and 53:2015 with corresponding CE

11、NELEC endorsements A51:2015, A52:2016 and A53:2015This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 May 1997 The British Standards Institution 2016. Published by B

12、SI Standards Limited 2016The following BSI references relate to the work on this British Standard: Committee reference CPL/34/2 Special announcement in Update Standards, February 1997National forewordThis British Standard is the UK implementation of EN 60061-1:1993+A53:2015. It is derived from IEC 6

13、0061-1:1969, together with supplements 1A to 1V, and amendments 21 to 53.NOTE There are no amendments A8 to A20 to EN 60061-1.This British Standard supersedes BS EN 60061-1:1993+A50:2014 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee CPL/34, Lamps and

14、 Related Equipment to Subcommittee CPL/34/2, Lamp caps and holders.A list of organizations represented on this subcommittee can be obtained on request to its secretary.iThe numerical identification of the data sheets is achieved by the use of three numbers, which appear at the foot of each sheet, th

15、e significance of which is as follows.The Part of BS EN 60061 in which they appear is identified by the first number, i.e.7004 Part 1 Lamp caps7005 Part 2 Lamp holders7006 Part 3 Gauges7007 Part 4 Guidelines and general informationThe sequence, which may not be continuous, in which data sheets appea

16、r is identified by the second number. The issue number of an individual data sheet is identified by the third number. For example, 7004-10-5 describes a B22 bayonet cap appearing in Part 1 of BS EN 60061, the current data sheets being the fifth issue.To facilitate reproduction, pages from IEC 60061-

17、1 containing dual language text have been used in the production of this Part of BS EN 60061.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal

18、 obligations.The amendment by which each page of the European Standard wasintroduced is indicated by an extension to the shoulder heading at the topof the page (e.g. 60061-1 Amend. 49 (c) CEI/IEC:2013). Where no suchextension appears, the page is part of the original European Standard.BS EN 60061-1:

19、1993+A50:2014BS EN 60061-1:1993+A53:2015iAll pages of the IEC text are reproduced here. However, note that CENELEC common modifications apply and that they consist of the deletion of data sheets for non-European lamp caps, holders and associated gauges (i.e. E11, E12, E17/20, E26 and E39).This page

20、deliberately set blankThis page deliberately set blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60061-1:1993/A53 December 2015 ICS 29.140.10 English Version Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps (IEC 60061-1:1969/A5

21、3:2015) Culots de lampes et douilles ainsi que calibres pour le contrle de linterchangeabilit et de la scurit - Partie 1: Culots de lampes (IEC 60061-1:1969/A53:2015) Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 1: Lampensockel (IEC 60061-1:1969/A

22、53:2015) This amendment A53 modifies the European Standard EN 60061-1:1993; it was approved by CENELEC on 2015-09-25. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a national standard without any a

23、lteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This amendment exists in three official versions (English, French, German). A version in any other language made

24、 by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Re

25、public, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom

26、. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved wo

27、rldwide for CENELEC Members. Ref. No. EN 60061-1:1993/A53:2015 E EN 60061-1:1993+A53Foreword This European Standard, based on the Interna-tional Standard IEC 61-1 : 1969 + supplements A : 1970 to N : 1992 along with common modifications, was prepared by CENELEC Technical Committee TC 34Z, Luminaires

28、 and associated equipment.NOTE. IEC 61-1 : 1969 + supplements A: 1970 to K : 1983 were published as a consolidated edition. It was submitted to the CENELEC Unique Ac-ceptance Procedure (UAP) in May 1992 and was approved by CENELEC as EN 60061-1 on 9 March 1993. This European Standard supersedes HD 6

29、5.1 SI : 1978. The following dates were fixed: latest date of publication of an identical national standard (dop) 1994-03-01 latest date of withdrawal of conflicting national standards (dow) 1994-03-01For products which have complied with HD 65.1 SI : 1978 before 1994-03-01, as shown by the manufact

30、urer or by a certification body, this previ-ous standard may continue to apply for production until 1999-03-01. Attention is drawn to the fact that lamp caps and lampholders with designation P29t, PY43d and PZ43t standard sheets 7004-66, 7004-88, 7004-89, 7005-66, 7005-88, 7005-89, 7006-88, 7006-88A

31、 and 7006-89 are not listed in ECE Regulation 37. Foreword to amendment A1The text of the 14th supplement (IEC 61-1P : 1994) to the International Standard IEC 61-1 : 1969, pre-pared by SC 34B, Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submitted to the Unique Acceptance Pr

32、ocedure and was approved by CENELEC as amendment Al to EN 60061 : 1993 on 1994-12-06 without any modification. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical standard or by endorsement (dop) 1995-12-01 latest

33、date by which the national standards conflicting with the amendment have to be withdrawn (dow) 1995-12-01 Page 2For products which have complied with EN 60061-1 : 1993 before 1995-12-01, as shown by the manufacturer or by a certification body, this previ-ous standard may continue to apply for produc

34、tion until 2000-12-01. Endorsement notice The text of amendment 1:1994 to the Inter-national Standard IEC 60061-1:1969 was approved by CENELEC as an amendment to the European Standard without any modification. Foreword to amendment A2The text of the 15th supplement (IEC 61-1Q : 1994) to the Internat

35、ional Standard IEC 61-1 : 1969, pre-pared by SC 34B, Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as amendment A2 to EN 60061 : 1993 on 1995-11-28 without any modification. The following dates were fixe

36、d: latest date by which the amendment has to be implemented at national level by publication of an identical standard or by endorsement (dop) 1996-09-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 1996-09-01For products which have complied wi

37、th EN 60061-1 : 1993 before 1996-09-01, as shown by the man-ufacturer or by a certification body, this previous standard may continue to apply for production until 2001-09-01. Endorsement notice The text of amendment 2:1995 to the Inter-national Standard IEC 60061-1:1969 was approved by CENELEC as a

38、n amendment to the European Standard without any modification.BS EN 60061-1:1993+A46:2011 EN 60061-1:1993+A46:2011 (E)Foreword to amendment A3The text of document 34B/546/DIS, future 16th sup-plement to IEC 61-1: 1969, prepared by SC 34B, Lamp caps and holders, of IEC TC 34, Lamps and related equipm

39、ent, was submitted to the IECCENELEC parallel vote and was approved by CENELEC as amendment A3 to EN 60061-1 : 1993 on 1995-11-28. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical standard or by endorsement (dop

40、) 1996-09-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 1996-09-01For products which have complied with EN 60061-1 : 1993 and its amendment Al : 1995 before 1996-09-01, as shown by the manufacturer or by a certification body, this previous s

41、tandard may continue to apply for production until 2001-09-01.Endorsement notice The text of amendment 3:1995 to the International Standard IEC 60061-1:1969 was approved by CENELEC as an amendment to the European Standard without any modification.Foreword to amendment A4The text of document 34B/546/

42、DIS, future 17th sup-plement to IEC 61-1: 1969, prepared by SC 34B, Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submitted to the IECCENELEC parallel vote and was approved by CENELEC as amendment A4 to EN 60061-1 : 1993 on 1995-11-28. The following dates were fixed: latest d

43、ate by which the amendment has to be implemented at national level by publication of an identical standard or by endorsement (dop) 1996-12-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 1996-12-01For products which have complied with EN 60061

44、-1 : 1993 and its amendment Al : 1995, A2 : 1995 and A3 : 1995 before 1996-12-01, as shown by the manufacturer or by a certification body, this previous standard may continue to apply for production until 2001-12-01.Endorsement notice The text of amendment 4:1995 to the International Standard IEC 60

45、061-1:1969 was approved by CENELEC as an amendment to the European Standard without any modification.Foreword to amendment A5The text of document 34B/590/DIS, future 18th sup-plement to IEC 61-1: 1969, prepared by SC 34B, Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submitte

46、d to the IECCENELEC parallel vote and was approved by CENELEC as amendment A5 to EN 60061-1 : 1993 on 1996-07-02. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical standard or by endorsement (dop) 1997-04-01 late

47、st date by which the national standards conflicting with the amendment have to be withdrawn (dow) 1997-04-01For products which have complied with EN 60061-1 : 1993 and its amendment Al : 1995, A2 : 1995, A3 : 1995 and A4 : 1996 before 1997-04-01, as shown by the manufacturer or by a certification bo

48、dy, this previous standard may continue to apply for production until 2002-04-01.Endorsement notice The text of amendment 5:1996 to the International Standard IEC 60061-1:1969 was approved by CENELEC as an amendment to the European Standard without any modification.Foreword to amendment A6The text o

49、f document 34B/622/DIS, future 19th supplement to IEC 60061-1: 1969, prepared by SC 34B, Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A6 to EN 60061-1 : 1993 on 1996-10-01. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical standard or by endorsement (dop) 1999-07-01 latest date by which the national standards conflicting with the amendment have to