EN 50272-4-2007 en Safety requirements for secondary batteries and battery installations - Part 4 Batteries for use in portable appliances《副电池和电池设备的安全性要求 第4部分 便携式设备用电池》.pdf

《EN 50272-4-2007 en Safety requirements for secondary batteries and battery installations - Part 4 Batteries for use in portable appliances《副电池和电池设备的安全性要求 第4部分 便携式设备用电池》.pdf》由会员分享，可在线阅读，更多相关《EN 50272-4-2007 en Safety requirements for secondary batteries and battery installations - Part 4 Batteries for use in portable appliances《副电池和电池设备的安全性要求 第4部分 便携式设备用电池》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 50272-4:2007Safety requirements for secondary batteries and battery installations Part 4: Batteries for use in portable appliancesThe European Standard EN 50272-4:2007 has the status of a British StandardICS 29.220.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g

2、44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 50272-4:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2007 BSI 2007ISBN 978 0 580

3、50564 5National forewordThis British Standard was published by BSI. It is the UK implementation of EN 50272-4:2007.The UK participation in its preparation was entrusted to Technical Committee PEL/21, Secondary cells and batteries.A list of organizations represented on this committee can be obtained

4、on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date Com

5、mentsEUROPEAN STANDARD EN 50272-4 NORME EUROPENNE EUROPISCHE NORM March 2007 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 200

6、7 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50272-4:2007 E ICS 29.220.20 English version Safety requirements for secondary batteries and battery installations - Part 4: Batteries for use in portable appliances Rgles de scuri

7、t pour les batteries daccumulateurs et leur installation - Partie 4: Batteries daccumulateurs utilises dans les appareils portables Sicherheitsanforderungen an Batterien und Batterieanlagen - Teil 4: Batterien fr tragbare Gerte This European Standard was approved by CENELEC on 2006-03-01. CENELEC me

8、mbers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applica

9、tion to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat

10、 has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Nethe

11、rlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 50272-4:2007 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 21X, Secondary cells and batteries. The text of the draft was submitted to the fo

12、rmal vote and was approved by CENELEC as EN 50272-4 on 2006-03-01. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-10-01 - latest date by which the national standards c

13、onflicting with the EN have to be withdrawn (dow) 2009-03-01 _ - 3 - EN 50272-4:2007 Contents Page Introduction 4 1 Scope 4 2 Normative references4 3 Definitions5 4 Operating instructions .5 5 Dimensions and interchangeability of cells and batteries .6 6 Electrical safety .6 6.1 Protection against i

14、ncorrect connection polarity .6 6.2 Design of battery and battery compartments 6 6.3 Compartments for consumer replaceable batteries 6 7 Safe handling and protection against misuse .6 7.1 Charging6 7.2 Thermal abuse 7 7.3 Mechanical impact.7 7.4 Protection against pole reversal in the event of deep

15、discharge 7 7.5 Protection against electrical overload .7 7.6 Safe handling 7 8 Battery compartments .7 8.1 Battery accommodation.7 8.2 Replacement battery enclosures.7 8.3 Battery contacts.7 8.4 Protection against hazards caused by released gas 7 9 Measures in the event of accidents with batteries

16、8 9.1 Swallowing button cells .7 9.2 Burns or positioning caused byleaking batteries.8 10 Marking and disposal of batteries for use in portable appliances .9 Annex A (informative).10 A.1 Instructions for use10 A.2 Recommendations to the end-users .10 Bibliography.12 EN 50272-4:2007 - 4 - Introductio

17、n This standard gives information about the safety and health protection of persons when applying secondary batteries, which are used for DC power supply systems in portable appliances. Therefore the standard applies for commercially available secondary batteries and battery systems according to the

18、 requirements of the “Low Voltage Directive”. In the European countries similar relevant standards or specifications or parts of it exist, which shall be taken into account and will be replaced by this new standard. In certain portable appliances or toys the discharge of both primary and secondary c

19、ells or batteries is possible. In case of interchange ability of these cells or batteries the standards for primary batteries of the EN 60086 series, Parts 1 to 5, shall have preference. 1 Scope This standard applies to the safety aspects associated with the accommodation, the arrangements of circui

20、ts and the operation of secondary cells and batteries in portable appliances. Requirements are specified which oblige the manufacturers of appliances and secondary batteries to prevent the misuse of batteries in the course of operation to provide protective measures avoiding injury to persons in cas

21、e of battery failure and to provide sufficient information to users. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced do

22、cument (including any amendments) applies. EN 50272-2 Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries EN 60086-1 Primary batteries - Part 1: General (IEC 60086-1) EN 60086-2 Primary batteries - Part 2: Physical and electrical specifications (IEC 6

23、0086-2) EN 60086-3 Primary batteries - Part 3: Watch batteries (IEC 60086-3) EN 60086-4 Primary batteries - Part 4: Safety of lithium batteries (IEC 60086-4) EN 60086-5 Primary batteries - Part 5: Safety of batteries with aqueous electrolyte (IEC 60086-5) EN 60335-1 Household and similar electrical

24、appliances - Safety - Part 1: General requirements (IEC 60335-1) EN 61056-2 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking (IEC 61056-2) EN 61429 + A11 Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1

25、135 and indications regarding directives 93/86/EEC and 91/157/EEC (IEC 61429) EN 61951-1 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium (IEC 61951-1) - 5 - EN 50272-4:2007 EN 61951-2 Secondary cell

26、s and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride (IEC 61951-2) EN 61960 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable a

27、pplications (IEC 61960) EN 62133 Secondary cells and batteries containing alkaline or other non-acid electrolytes -Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable application (IEC 62133) IEC 60050-482 International Electrotechnical Vocab

28、ulary - Chapter 482: Primary and secondary cells and batteries IEC 60417 database Graphical symbols for use on equipment 3 Definitions 3.1 battery for use in portable appliances mainly used for the power supply of the electrical equipment or parts of it forming an integral, functional unit. Batterie

29、s for use in portable equipment are usually maintenance-free types. For further definitions see International Electrotechnical Vocabulary IEC 60050-482 3.2 secondary cell / battery cell which is designed to be electrically recharged, basic functional unit providing a source of electrical energy by d

30、irect conversion of chemical energy, the cell (or battery) consists of an assembly of electrodes, separators, electrolyte, container and terminals IEV 482-01-03 4 Operating instructions Users of appliances shall be informed through operating instructions about the following items, with specific refe

31、rence to batteries: a) proposed or applicable battery systems and battery dimensions according to the applicable standard, b) correct insertion of batteries into the equipment in terms of polarity, c) charging instructions for secondary batteries, d) prohibition of charging when using primary batter

32、ies, e) storage and temperature conditions, f) maintenance instructions, g) instructions for the prevention of hazard and measures to be taken following an accident, h) instructions about disposal. Operating instructions for batteries in portable appliances must be provided and can be part of the eq

33、uipment instructions. Required information for safe operation, like polarity, voltage, battery type, etc shall be repeated inside or close to the battery compartment. EN 50272-4:2007 - 6 - 5 Dimensions and interchange ability of cells and batteries Cells and batteries with reverse polarity but ident

34、ical dimensions shall not be sent into the retail market. Compliance with the existing standards is required. Interchange ability of cells and batteries with the same nominal voltage and identical dimensions, but of different technologies is permitted, if stated by the appliance manufacturer (see EN

35、 60086-1, Subclause 4.1.7). Cells in a battery string shall be of identical design, type and brand. It is recommended to use cells of same state of charge and same age (see IEC/TR 62188, Subclause 7.9). 6 Electrical safety 6.1 Protection against incorrect connection polarity Manufacturers of applian

36、ces shall provide measures against incorrect polarity connections of the battery to the device. Measures can be, e.g. marking of the position of individual cells or batteries, polarity marked cables, plugs, design of compartments and contacts, electronics, (see EN 60086-5, Annex B and EN 60335-1, An

37、nex B). NOTE Where applicable the battery symbol according to IEC 60417 database shall be used. 6.2 Design of battery and battery compartments Both, the design of battery and battery compartment, shall include provisions to minimize the risk of the battery being reversed (connected the wrong way rou

38、nd) either during use or during charge. The design of terminals and the method of connecting them to the equipment or to the charger shall make wrong connection of the battery impossible (see EN 60086-5). 6.3 Compartments for consumer replaceable batteries Where battery compartments are designed for

39、 consumer replaceable batteries the requirements in EN 60086-5 apply. 7 Safe handling and protection against misuse 7.1 Charging The charging instructions which apply to the batteries and chargers shall be observed. Where replacement of batteries by the end user is foreseen, the equipment manufactur

40、er shall provide clear instructions about the replacement battery. - 7 - EN 50272-4:2007 7.2 Thermal abuse Battery systems for portable appliances shall not be overheated. Overheating due to service conditions will destroy the battery and, in individual cases, the equipment as well. Depending on the

41、 type of battery corrosive and/or toxic liquids or gases may be released. Therefore batteries shall be inserted into the appliances in such a way that their permissible temperature range is not exceeded. 7.3 Mechanical impact Batteries shall be protected from mechanical damage which may cause leakag

42、e of hazardous chemicals causing short-circuits which may result in overheating and subsequent rupturing of further cells. 7.4 Protection against pole reversal in the event of deep discharge Secondary batteries shall be charged / discharged, so that each cell gets charged or discharged to the same e

43、xtent (taps in the battery string lead to uneven discharge condition). Only cells and/or batteries of the same type and age shall be connected in series. The maximum number of cells specified by the battery manufacturer and any required protective measure for series connection shall be observed in o

44、rder to avoid pole reversal of individual cells in the event of deep discharge of the battery bank. Depending on the battery system reverse polarity can destroy the battery, damage the appliance, and expose the user to danger e.g. due to battery leakage. A low voltage protection device may be provid

45、ed for disconnection of the equipment from the load. If some cell reversal may cause damage to equipment or persons a protective device is required. 7.5 Protection against electrical overload Appliances and batteries shall be protected by short-circuit and overload protection devices, if the availab

46、le battery power may cause damage to equipment or persons. 7.6 Safe handling To achieve safe handling during transport, installation and replacement the battery terminals and the connection cables shall be designed so that short circuits are not possible. 8 Battery compartments Secondary batteries i

47、n portable appliances can be of permanently fixed installation, can be replaceable for recharging separately outside of the appliance or can be replaceable by primary batteries. In case of replaceable batteries the requirements 8.1 to 8.4 apply. Where watertight equipment is used safety precautions

48、are required to prevent or limit the generation of hydrogen. 8.1 Battery accommodation Battery enclosures for accommodation of batteries in electrical equipment shall be designed, where necessary, to be separate from the functional parts of the equipment and accessible from the outside. NOTE Cells o

49、r batteries may leak electrolyte. Both valve-regulated and gas-tight secondary batteries have a safety device (valve or vent) which release gas when activated. EN 50272-4:2007 - 8 - 8.2 Replacement battery enclosures Battery enclosures should be accessible, so that batteries can be replaced, and the enclosure and the contacts can be cleaned. 8.3 Battery contacts Contacts and dimensions shall be designed to minimize the voltage drop and to ensure current flow, e.g. resilient contacts may be provided. The contacts inside the battery compartments shall