EN 50173-2-2018 en Information technology - Generic cabling systems - Part 2 Office spaces.pdf

《EN 50173-2-2018 en Information technology - Generic cabling systems - Part 2 Office spaces.pdf》由会员分享，可在线阅读，更多相关《EN 50173-2-2018 en Information technology - Generic cabling systems - Part 2 Office spaces.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Information technology - Generic cabling systemsPart 2: Office spacesBS EN 50173-2:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50173-2 June 2018 ICS 33.040.50 Supersedes EN 50173-2:2007English Version Infor

2、mation technology - Generic cabling systems - Part 2: Office spaces Technologies de linformation - Systmes de cblage gnrique - Partie 2: Espaces de bureau Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 2: Brobereiche This European Standard was approved by CENELEC on 2018-

3、03-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obt

4、ained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified

5、to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greec

6、e, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation

7、 Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50173-2:2018 ENational forewordThis British

8、 Standard is the UK implementation of EN 50173-2:2018. It supersedes BS EN 50173-2:2007+A1:2010, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee TCT/7, Telecommunications - Installation requirements.A list of organizations represented on this committee

9、 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 51256 8ICS 33.040.50Co

10、mpliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 50173-2:2018EUR

11、OPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50173-2 June 2018 ICS 33.040.50 Supersedes EN 50173-2:2007English Version Information technology - Generic cabling systems - Part 2: Office spaces Technologies de linformation - Systmes de cblage gnrique - Partie 2: Espaces de bureau Informationstech

12、nik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 2: Brobereiche This European Standard was approved by CENELEC on 2018-03-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a natio

13、nal standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A v

14、ersion in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgar

15、ia, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, S

16、witzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploita

17、tion in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50173-2:2018 EBS EN 50173-2:2018BS EN 50173-2:2018EN 50173-2:2018 (E) 2 Contents Page European foreword 5 Introduction 6 1 Scope and conformance 9 1.1 Scope . 9 1.2 Conformance 9 2 Normative references . 10 3 Terms

18、, definitions and abbreviations . 10 3.1 Terms and definitions 10 3.2 Abbreviations .11 4 Structure of the generic cabling system in office spaces 11 4.1 General 11 4.2 Functional elements .11 4.3 Structure and hierarchy .12 4.4 Cabling subsystems .14 4.4.1 Office space cabling subsystems .14 4.4.2

19、Associated cabling subsystems .14 4.5 Design objectives.14 4.5.1 General 14 4.5.2 Horizontal cabling 15 4.5.3 Backbone cabling 16 4.5.4 Tie cabling .16 4.6 Accommodation of functional elements 16 4.6.1 General 16 4.6.2 Telecommunications Outlet assemblies .16 4.6.3 Distributors 16 4.6.4 Cables .16 4

20、.6.5 Consolidation Points 16 4.7 Interfaces .17 4.7.1 Equipment interfaces and test interfaces .17 4.7.2 Channels and links 17 4.8 Dimensioning and configuration .18 4.8.1 Distributors 18 4.8.2 Cables .19 4.8.3 Connecting hardware .19 4.8.4 Cords .19 4.8.5 Telecommunications Outlets and Consolidatio

21、n Points 20 4.8.6 External network interface .21 BS EN 50173-2:2018EN 50173-2:2018 (E) 3 5 Requirements for channels in office spaces . 21 5.1 General 21 5.2 Environmental performance .22 5.3 Transmission performance 23 5.3.1 General 23 5.3.2 Balanced cabling .23 5.3.3 Optical fibre cabling .23 6 Re

22、ference implementations in office spaces 23 6.1 General 23 6.2 Balanced cabling .24 6.2.1 General 24 6.2.2 Horizontal cabling 24 6.2.3 Backbone cabling 27 6.3 Optical fibre cabling .27 6.3.1 Horizontal cabling 27 6.3.2 Backbone cabling 29 7 Requirements for cables in office spaces 30 7.1 General 30

23、7.2 Balanced cables of Category 6, 6A,7, 7A, 8.1 and 8.2 30 7.3 Optical fibre cables of Category OM3, OM4, OM5, OS1a and OS2 .30 8 Requirements for connecting hardware in office spaces 30 8.1 General requirements 30 8.2 Balanced connecting hardware 30 8.2.1 General requirements 30 8.2.2 Electrical,

24、mechanical and environmental performance .31 8.3 Optical fibre connecting hardware 31 8.3.1 General requirements 31 8.3.2 Optical, mechanical and environmental performance .31 8.3.2.1 Connecting hardware at the Telecommunications Outlet 31 9 Requirements for cords and jumpers in office spaces 31 9.1

25、 Jumpers .31 9.2 Balanced cords of Category 6, 6A,7, 7A, 8.1 and 8.2 31 9.2.1 General 31 9.2.2 Additional requirements for certain cords .32 9.3 Optical fibre cords of Category OM3, OM4, OM5, OS1a and OS2 .32 BS EN 50173-2:2018EN 50173-2:2018 (E) 4 Annex A (normative) Link performance limits. 33 A.1

26、 General. 33 A.2 Balanced cabling 33 A.3 Optical fibre cabling . 34 Bibliography . 35 Figures Figure 1 Schematic relationship between the EN 50173 series and other relevant standards 7 Figure 2 Structure of generic cabling 12 Figure 3 Hierarchical topology of generic cabling . 13 Figure 4 Structures

27、 for centralized generic cabling 13 Figure 5 Examples of cabling implementation to improve reliability . 15 Figure 6 Accommodation of functional elements 17 Figure 7 Test and equipment interfaces . 17 Figure 8 Example of a generic cabling system with combined BD and FD 19 Figure 9 Example of a horiz

28、ontal cabling channel 22 Figure 10 Example of a system showing the location of cabling interfaces . 22 Figure 11 Horizontal cabling models 26 Figure 12 Combined optical fibre backbone/horizontal channels . 29 Figure A.1 Link options . 33 Tables Table 1 Contextual relationship between EN 50173 series

29、 and other standards relevant for information technology cabling systems . 7 Table 2 Maximum channel lengths for reference implementations 18 Table 3 Horizontal channel equations 27 BS EN 50173-2:2018EN 50173-2:2018 (E) 5 European foreword This document (EN 50173-2:2018) was prepared by the Technica

30、l Committee CENELEC TC 215, Electrotechnical aspects of telecommunication equipment. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2019-03-19 latest date by which the

31、national standards conflicting with this document have to be withdrawn (dow) 2021-03-19 This document supersedes EN 50173-2:2007 + A1:2010 + AC:2011. The previous editions of European Standards EN 50173:1995 and EN 50173-1:2002 have been developed to enable the application-independent cabling to sup

32、port ICT applications in office premises. Their basic principles, however, are applicable to other types of applications and in other types of premises. This edition of EN 50173-2: a) introduces new balanced cabling component Categories 8.1 and 8.2 to support new channel Classes I and II as well as

33、optical fibre categories OM5 and OS1a; b) amends various other subclauses, tables and figures; c) aligns the document structure across all parts of the series. TC 215 has decided to establish relevant European Standards which address the specific requirements of these premises. In order to point out

34、 the commonalities of these cabling design standards, these EN are published as individual parts of the series EN 50173, thus also acknowledging that standards users recognize the designation “EN 50173” as a synonym for generic cabling design. At the time of publication of this European Standard, se

35、ries EN 50173 comprises the following standards: EN 50173-1 Information technology Generic cabling systems Part 1: General requirements EN 50173-2 Information technology Generic cabling systems Part 2: Office spaces EN 50173-3 Information technology Generic cabling systems Part 3: Industrial spaces

36、EN 50173-4 Information technology Generic cabling systems Part 4: Homes EN 50173-5 Information technology Generic cabling systems Part 5: Data centre spaces EN 50173-6 Information technology Generic cabling systems Part 6: Distributed building services Attention is drawn to the possibility that some

37、 of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. BS EN 50173-2:2018EN 50173-2:2018 (E) 6 Introduction The importance of cabling infrastructure is similar to that of other fundamental utilities

38、such as water and energy supply and interruptions to the services provided over that infrastructure can have a serious impact. A lack of design foresight, the use of inappropriate components, incorrect installation, poor administration or inadequate support can threaten quality of service and have c

39、ommercial consequences for all types of users. This standard specifies generic cabling within and between the buildings of office premises, or office spaces within other types of building. Additionally those premises can include: industrial spaces for which generic cabling is specified in EN 50173-3

40、; data centre spaces for which generic cabling is specified in EN 50173-5. Generic cabling for distributed building services in office spaces is specified in EN 50173-6 which addresses all of the above premises and spaces within them. Figure 1 and Table 1 show the schematic and contextual relationsh

41、ips between the standards produced by TC 215 for information technology cabling, namely: 1) this and other parts of the EN 50173 series; 2) installation (EN 50174 series); 3) bonding (EN 50310). BS EN 50173-2:2018EN 50173-2:2018 (E) 7 Figure 1 Schematic relationship between the EN 50173 series and o

42、ther relevant standards Table 1 Contextual relationship between EN 50173 series and other standards relevant for information technology cabling systems Building design phase Generic cabling design phase Specification phase Installation phase Operation phase EN 50310 EN 50173-2 EN 50173-3 EN 50173-4

43、EN 50173-5 EN 50173-6 (these ENs reference general requirements of EN 50173-1) EN 50174-1 EN 50174-2 EN 50174-3 EN 50310 EN 50174-1 Planning phase EN 50174-2 EN 50174-3 EN 50310 In addition, a number of Technical Reports have been developed to support or extend the application of these standards, in

44、cluding: CLC/TR 50173-99-1, Cabling guidelines in support of 10 GBASE-T; BS EN 50173-2:2018EN 50173-2:2018 (E) 8 CLC/TR 50173-99-2, Information technology Implementation of BCT applications using cabling in accordance with EN 50173-4; CLC/TR 50173-99-3, Information technology Generic cabling system

45、Part 99-3: Home cabling infrastructures up to 50 m in length to support simultaneous and non simultaneous provision of applications. In addition, a number of cabling design standards have been developed using components of EN 50173-1 (e.g. EN 50098 series and EN 50700). The generic cabling specified

46、 by this standard provides users with: an application independent system capable of supporting a wide range of applications including, but not restricted to, those in EN 50173-1:2018, Annex F in a range of installation and operating environments; a flexible scheme such that modifications are both ea

47、sy and economical; a multi-vendor supply chain within an open market for cabling components. In addition this standard provides: a) relevant industry professionals with guidance allowing the accommodation of cabling before specific requirements are known; i.e. in the initial planning either for cons

48、truction or refurbishment and for further deployment as the requirements of areas are defined; b) industry and standardization bodies with a cabling system which supports current products and provides a basis for future product development and applications standardization. Applications addressed in

49、this standard include those developed by the Technical Committees of IEC (including the subcommittees of ISO/IEC JTC 1) and study groups of ITU-T. Physical layer requirements for the applications listed in EN 50173-1:2018, Annex F, have been analysed to determine their compatibility with the cabling performance specified in this standard and, together with statistics concerning premises geography from different countries and the models described in Clause 4, have been used to de