EN 50083-2-2012 en Cable networks for television signals sound signals and interactive services - Part 2 Electromagnetic compatibility for equipment (Incorporates Amendment A1 2015.pdf

《EN 50083-2-2012 en Cable networks for television signals sound signals and interactive services - Part 2 Electromagnetic compatibility for equipment (Incorporates Amendment A1 2015.pdf》由会员分享，可在线阅读，更多相关《EN 50083-2-2012 en Cable networks for television signals sound signals and interactive services - Part 2 Electromagnetic compatibility for equipment (Incorporates Amendment A1 2015.pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 50083-2:2012Cable networks for television signals, sound signals and interactive services Part 2: Electromagnetic compatibility for equipmentBS EN 50083-2:2012+A1:2015BS EN 50082-2:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementa

2、tion of EN 50083-2:2012+A1:2015. It supersedes BS EN 50083-2:2012 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee EPL/100, Audio, video and multimedia systems and equipment, to Subcommittee EPL/100/4, Cable distribution equipment and systems.A list of

3、organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Li

4、mited 2015ISBN 978 0 580 90363 2ICS 33.060.40; 33.100.01Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2012.Amendments/corrigenda issued since publicatio

5、nDate Text affected31 December 2015 Implementation of CENELEC amendment A1:2015: Subclause 4.4.4.1.1 modifiedBS EN 50083-2:2012EUROPEAN STANDARD EN 50083-2 NORME EUROPENNE EUROPISCHE NORM March 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electr

6、otechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50083-2:2012 E ICS 33.060.40 Supersedes EN 50083-2:2006English

7、 version Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment Rseaux de distribution par cbles pour signaux de tlvision, signaux de radiodiffusion sonore et services interactifs - Partie 2: Compatibilit lectromagntique po

8、ur les matriels Kabelnetze fr Fernsehsignale, Tonsignale und interaktive Dienste - Teil 2: Elektromagnetische Vertrglichkeit von Gerten This European Standard was approved by CENELEC on 2011-12-21. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the cond

9、itions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard e

10、xists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the n

11、ational electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

12、Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 50083-2:2012+A1November 2015Supersedes EN 50082-2:2012BS EN 50083-2:2012EN 50083-2:2012 2 Contents Contents 2Foreword . 51 Scope . 71.1 General . 71.2 Specific scope of EN 50083-2 72 Normative references . 93 Terms, definitions, symbols a

13、nd abbreviations 103.1 Terms and definitions . 103.2 Symbols 153.3 Abbreviations 164 Methods of measurements 164.1 General operating conditions 164.2 Disturbance voltages from equipment 174.3 Radiation from active equipment 184.4 Immunity of active equipment . 284.5 Screening effectiveness of passiv

14、e equipment 404.6 Electrostatic discharge immunity test for active equipment 424.7 Electrical fast transient/burst immunity test for AC power ports . 424.8 Methods of measurement for telecom signal ports of multimedia network equipment 424.9 Measurement of indoor receiving antennas for broadcast sig

15、nals . 425 Performance requirements 435.1 General . 435.2 Disturbance voltages from equipment 435.3 Radiation . 445.4 Immunity of active equipment . 455.5 Screening effectiveness of passive equipment 515.6 Electrostatic discharge immunity test for active equipment 525.7 Electrical fast transient/bur

16、st immunity test for AC power ports . 525.8 Performance requirements for telecom signal ports of multimedia network equipment 525.9 Applicability of EMC performance requirements and methods of measurement to different types of equipment . 52Annex ZZ (informative) Coverage of Essential Requirements o

17、f EU Directives . 55Bibliography 56BS EN 50083-2:2012+A1:2015EN 50083-2:2012+A1:2015 2 BS EN 50083-2:2012 3 EN 50083-2:2012 Figures Figure 1 - Measurement set-up for radiation measurements in the frequency range 5 MHz to 30 MHz using the “coupling unit“ method 21Figure 2 - Absorbing clamp method (30

18、 MHz to 1 000 MHz) . 23Figure 3 - Example of general measurement set-up 24Figure 4 - Example of measurement set-up for measurements on the input port of an active equipment . 24Figure 5 - Measurement set-up for the “substitution“ radiation method First measurement step 26Figure 6 - Measurement set-u

19、p for the “substitution“ radiation method Second measurement step . 27Figure 7 - Frequency allocation for out-of-band immunity measurement of active equipment with nominal upper frequency limit 1 000 MHz . 30Figure 8 - Frequency allocation for out-of-band immunity measurement of active equipment wit

20、h nominal lower frequency limit 950 MHz 30Figure 9 - Frequency allocation for in-band immunity measurement of active equipment with nominal upper frequency limit 1 000 MHz 33Figure 10 - Frequency allocation for in-band immunity measurement of active equipment with nominal lower frequency limit 950 M

21、Hz 33Figure 11 - Measurement set-up for internal immunity test 35Figure 12 - Levels of wanted and unwanted signals for the internal immunity of FSS receiving outdoor units . 38Figure 13 - Levels of wanted and unwanted signals for the internal immunity of BSS receiving outdoor units . 39Figure 14 - L

22、evels of unwanted signals for the internal immunity of active equipment in Band I (47 MHz to 68 MHz) 47Figure 15 - Levels of unwanted signals for the internal immunity of active equipment in Band II (87,5 MHz to 108 MHz) 48Figure 16 - Levels of unwanted signals for the internal immunity of active eq

23、uipment in Band III (174 MHz to 230 MHz) . 49Figure 17 - Levels of unwanted signals for the internal immunity of active equipment in Band IV/V (470 MHz to 862 MHz) . 50BS EN 50083-2:2012+A1:2015EN 50083-2:2012+A1:2015 3 BS EN 50083-2:2012EN 50083-2:2012 4 Tables Table 1 - Port structure of different

24、 network equipment . 8Table 2 - Limits of mains terminal disturbance voltage 43Table 3 - Limits of input terminal disturbance voltages for equipment directly connected to receiving antennas 44Table 4 - Limits of input terminal disturbance voltages for equipment directly connected to satellite outdoo

25、r units 44Table 5 - Limits of radiated disturbance power . 44Table 6 - Limit of local oscillator terminal power . 45Table 7 - Limits of out-of-band immunity 45Table 8 - Limits of in-band immunity . 46Table 9 - Test specification for internal immunity . 46Table 10 - Limits of immunity to image freque

26、ncy signals in terms of image suppression ratio . 51Table 11 - Limits of screening effectiveness of passive equipment within the nominal frequency ranges 51Table 12 - Test specifications for electrostatic discharge immunity test for active equipment 52Table 13 - Test specifications for electrical fa

27、st transient/burst immunity test . 52Table 14 - Port types and environmental conditions for EMC performance requirements and methods of measurement . 52Table 15 - Emission parameters. 53Table 16 - Immunity and screening effectiveness parameters . 54BS EN 50083-2:2012+A1:2015EN 50083-2:2012+A1:2015 4

28、 BS EN 50083-2:2012 5 EN 50083-2:2012 Foreword This document (EN 50083-2:2012) has been prepared by CLC/TC 209 “Cable networks for television signals, sound signals and interactive services“. The following dates are fixed: latest date by which this document has to be implemented at national level by

29、 publication of an identical national standard or by endorsement (dop) 2012-12-21 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2013-06-21 This document supersedes EN 50083-2:2006. EN 50083-2:2012 includes the following significant technical ch

30、anges with respect to EN 50083-2:2006: 1. .Frequency extensions 1.1. The upper frequency limit of conventional cable network equipment was extended from 862 MHz to 1 000 MHz due to market demands. 1.2. The first intermediate frequency range (1stIF range) for satellite signal transmission was extende

31、d to cover now frequencies from 950 MHz up to 3 500 MHz. 1.3. The methods of measurement and the EMC requirements in the overlapping frequency range from 950 MHz to 1 000 MHz were allocated in relation to the upper frequency limit, 1 000 MHz, respectively the lower frequency limit, 950 MHz, of the r

32、elevant equipment under test. 2. New EMC environment in the 800 MHz band 2.1. The European Commission has requested CENELEC and ETSI to draft immunity requirements for equipment, to protect against disturbance from the new wireless service in the 790-862 MHz band. 2.2. A CENELEC/ETSI Joint Working G

33、roup “Digital Dividend” was formed to describe the new EMC environment and to advise on appropriate test methods and limits. 2.3. EN 50083-2 is the standard specifying immunity requirements for active and passive cable network equipment. 2.4. The method of measurement and the requirements for in-ban

34、d immunity were extended taking into account this new EMC environment due to the allocation of broadband wireless services in the frequency band 790 MHz to 862 MHz. As a consequence, the limits of in-band immunity were specified for analogue and additionally for digital signals in this frequency ran

35、ge. 2.5. Consequently it is recommended, that, where cable networks and wireless networks coexist, only the transmission of digitally modulated signals should be used in the frequency range 790 MHz to 862 MHz. 2.6. For passive equipment, Class A and Class B specifications were kept in the standard b

36、ut a note was added recommending that only Class A equipment should be used in the planning and implementation of new networks. 3. Indoor antennas The methods of measurement for all kinds of indoor antennas were combined in the new 4.9. BS EN 50083-2:2012+A1:2015EN 50083-2:2012+A1:2015 5 BS EN 50083

37、-2:2012EN 50083-2:2012 6 4. Bibliography A Bibliography was added at the end of the document referencing i.a. to CEPT Report 30 on “The identification of common and minimal (least restrictive) technical conditions for 790-862 MHz for the digital dividend in the European Union”. Attention is drawn to

38、 the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the Europea

39、n Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document _ BS EN 50083-2:2012+A1:2015EN 50083-2:2012+A1:2015 6 EN 50083-2:2012/A1:2015 (E) 2 European foreword This

40、document (EN 50083-2:2012/A1) has been prepared by CLC/TC 209 “Cable networks for television signals, sound signals and interactive services“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or

41、 by endorsement (dop) 2016-09-14 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2018-09-14 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsibl

42、e for identifying any or all such patent rights. Foreword to amendment A1BS EN 50083-2:2012 7 EN 50083-2:2012 1 Scope 1.1 General Standards of the EN 50083 and EN 60728 series deal with cable networks including equipment and associated methods of measurement for headend reception, processing and dis

43、tribution of television signals, sound signals and their associated data signals and for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission media. This includes CATV-networks 1), MATV-networks and SMATV-networks, individual receiv

44、ing networks and all kinds of equipment, systems and installations installed in such networks. The extent of this standardisation work is from the antennas and/or special signal source inputs to the headend or other interface points to the network up to the terminal input. The standardisation of any

45、 user terminals (i.e., tuners, receivers, decoders, multimedia terminals, etc.) as well as of any coaxial, balanced and optical cables and accessories thereof is excluded. 1.2 Specific scope of EN 50083-2 This European Standard applies to the radiation characteristics and immunity to electromagnetic

46、 disturbance of EM-active equipment (active and passive equipment) for the reception, processing and distribution of television, sound and interactive multimedia signals as dealt with in the following parts of EN 50083 or EN 60728 series: EN 60728-3 “Active wideband equipment for cable networks“; EN

47、 60728-4 “Passive wideband equipment for coaxial cable networks“; EN 60728-5 “Headend equipment“; EN 60728-6 “Optical equipment“; covers the following frequency ranges: disturbance voltage injected into the mains 150 kHz to 30 MHz; radiation from active equipment 5 MHz to 25 GHz; immunity of active

48、equipment 150 kHz to 25 GHz 2); screening effectiveness of passive equipment 5 MHz to 3,5 GHz (25 GHz) 3); 1)CATV-networks encompasses the HFC networks used nowadays to provide telecommunications services, voice, data, audio and video both broadcast and narrowcast. 2)For Inband immunity of active eq

49、uipment“ and Out-of-band immunity of active equipment, no requirements apply at present for the frequency range 3,5 GHz to 25 GHz. Methods of measurement and limits are investigated for inclusion in a future amendment or revised edition. 3)For “Screening effectiveness of passive equipment“, no requir