EN 45510-7-1-1999 en Guide for Procurement of Power Station Equipment - Part 7-1 Pipework and Valves - High Pressure Piping Systems《发电站设备的采购指南 第7-1部分 管件和阀门 高压管道系统》.pdf

《EN 45510-7-1-1999 en Guide for Procurement of Power Station Equipment - Part 7-1 Pipework and Valves - High Pressure Piping Systems《发电站设备的采购指南 第7-1部分 管件和阀门 高压管道系统》.pdf》由会员分享，可在线阅读，更多相关《EN 45510-7-1-1999 en Guide for Procurement of Power Station Equipment - Part 7-1 Pipework and Valves - High Pressure Piping Systems《发电站设备的采购指南 第7-1部分 管件和阀门 高压管道系统》.pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、 STD-BSI BS EN 45510-7-1-ENGL 2000 lb24bb9 0824580 566 M BRITISH STANDARD Guide for procurement of power station equipment - Part 7-1: Pipework and valves - High pressure piping systems The European Standard EN 45510-7-1: 1999 has the status of a British Standard ICs 23.040.01; 27.100 NO COPYING WIT

2、HOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN 455 10-7-1:2000 National foreword direction of the Engineering AmdNo. Sector Commi.ee,was published under the authority of the Standards Committee and comes into effect on 15 January 2000 O BSI 01-2000 This British Standard is the Englis

3、h language version of EN 45510-7-1:1999. The UK participation in its preparation was entrusted to Technical Committee E/-/20, Power engineering steering systems, which has the responsibility to: Date Comments - aid enquirers to understand the text; - present to the responsible European committee any

4、 enquiries on the - monitor related international and European developments and promulgate interpretation, or proposals for change, and keep the UK interests informed; them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references

5、The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “Intedonal Standards Correspondence Index“, or by using the “Find“ facility of the BSI Standards Electronic Catalogue. A Br

6、itish Standard does not purport to include ail the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a fr

7、ont cover, an inside front cover, the EN title page, pages 2 to 26, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. ISBN O 580 35367 2 STD*BSI BS EN 455LO-7-L-ENGL 2000 EUROPEAN STANDARD NORME EUROPENNE EUROPISCH

8、E NORM E Lb24hb9 0824582 339 E EN 45510-7-1 October 1999 ICs English version Guide for procurement of power station equipment - Part 7-1 : Pipework and valves - High pressure piping systems Guide pour lacquisition dquipements destins aux centrales de production dlectricit - Pattie 7-1: Tuyauteries e

9、t robinets -Tuyauteries haute pression Leitfaden fr die Beschaffung von Ausrstungen fr Kraftwerke - Teil 7-1: Rohrleitungen und Armaturen - Hochdruckro hrleitungen This European Standard was approved by CENICENELEC on 1 October 1999. CENICENELEC members are bound to comply with the CENICENELEC Inter

10、nal Regulations which stipulate the conditions for giving th6 European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references corcerning such national standards may be obtained on application to the Central Secretariat or to any CENICENELEC

11、 member. This European Standard exists in three official versions (English, French, German). A version in any other language made by traislation under the responsibility of a CENICENELEC member into its own language and notified to the Central Secretariat has the same status as the oficial versions.

12、 CENICENELEC members are the national standards bodies and national electrotechnical committees, respectively, of Austria, Belgum, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal.Spain, Sweden, Switzerland and United Kingd

13、om. CEN Centrai Secretariat: rue de Stassart, 36 84050 Brussels CENELEC CENELEC Central Secretariat: B-1050 Brussels rue de Stassart, 35 O 1999 CENICENELEC Ail rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 45510-7

14、-1:1999 E STDmBSI BS EN q55LO-7-L-ENGL 2000 Lb24bb9 0824583 275 111 Page 2 EN 4551 0-7-1 :i999 Contents: 1 2 3 3.1 3.2 3.3 4 4 . 1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 6 7 7.1 7.2 7.3 7.4 7.5 7.6 7.7 8 8.1 8.2 9 9.1 9.2 9.3 9.4 9.5 9.6 10 10. 1 10.2 10.3 10.4 10.5 10.6 11 11.7 11.2 11.3 11.4 Scope 6 No

15、rmative references 6 Definitions 7 Organizational terms . 7 General terms . 7 Technical terms - . 7 Brief overall project description _ . 8 Role and organization of purchaser . 8 Site location 8 Equipment task . - . 8 Equipment to be purchased 9 Electrical supplies and other services . - . 9 Other i

16、nterfaces B Equipment identification systems .- 10 Extent of supply . 10 Terminal points 11 Operational requirements . i 1 Operating environment . . 11 Manning levels 11 Normal operation 12 Operating hours - 12 Start-up and shut-down . 12 Abnormal conditions . 12 Life expectancy - 13 Design life . 1

17、3 Components requiring periodic maintenance . 13 Performance requirements . - . 13 Duty . i3 Performance . 14 Equipment margins - . 14 Availability . - 14 Levels of component redundancy . - 14 Further performance requirements . 14 Specific equipment features . 15 Design justification 18 Safety . 18

18、Interchangeabilrty . 79 Fabrication methods 19 Maintenance requirements - 19 Planned maintenance . 19 Personnel safety - 19 Requirements for access . - 19 Lifting requirements 19 Control and instrumentation systems . 9 Project programme - . 10 Further operational requirements . 12 . Design and fabri

19、cation - . 15 Material selection - 18 OBSI 01-2000 11.5 11.6 11.7 11.8 12 12.1 12.2 13 73.1 13.2 73.3 14 l# . 1 14.2 15 75.1 75.2 15.3 15.4 76 16.1 16.2 16.3 17 17.1 17.2 17.3 17.4 17.5 Page 3 EN 4551 0-7-1 :I 999 Special tools . 20 Test equipment . 20 Spare parts strategy 20 Special precautions . 2

20、0 Technical documentation requirements a) Tender documentation - . 20 Contract documentation . . 20 Applicable legislation. regulations. standards and further requirements 21 Legislation and regulations 21 Standards 21 Further requirements . ._ 22 Evaluation criteria 22 General . - 22 Technical crit

21、eria . . 22 Quality measures 23 General 23 Approvals procedure . 23 Non-conformity . 23 Site factors . 23 Access - 23 Facilities . . . 23 Site specific requirements . .- . 24 Verification of specified performance . 24 Inspection requirements . 23 General 24 Works tests . 24 Test during installation

22、and commissioning 24 Technical conditions for trial run - 25 Functional and performance tests - 25 Bibliography _. . 26 QBSI 01-2000 Page 4 EN 4551 0-7-1 1999 Foreword This European Standard has been prepared by Technical Committee CEN/CLC JTFP, Joint Task Force Power Engineering, the Secretariat of

23、 which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2000, and conflicting national standards shall be withdrawn at the latest by April 2000. According to the CEN/CENELEC I

24、nternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerl

25、and and the United Kingdom. This European Standard has been prepared by Technical Committee “, the Secretariat of which is held by BSI. This document is current/y submitted to the Formal Vote. This standard takes the form of a recommendation and is therefore entitled a “Guide“. This Guide for procur

26、ement has been prepared under mandates given to CEN and CENELEC by the European Commission and the European Free Trade Association. This Guide for procurement is a part of a series of Guides mandated to cover the procurement of power station plant and equipment in conformity with European Procuremen

27、t Directives. The Guides are: EN 45510 Guide for procurement of power station equipment Part I: Part 2- 1 : Part 2-2: Patt 2-3: Part 2-4: Part 2-5: Part 2-6: Part 2-7: Part 2-8: Part 2-9: Part 3-1: Part 3-2: Part 3-3: Part 4-1: Part 4-2: Part 4-3: Part 4-4: Part 4-5: Part 4-6: Part 4-7: Patt 4-8: Pa

28、rt 4-9: Common clauses Electrical equipment - Power transformers Electrical equipment - Uninterruptible power supplies Electrical equipment - Stationaty batteries and chargers Electrical equipment - High power static converters Electrical equipment - Motors Electrical equipment - Generators lec tric

29、al equipment - Switchgears and controlgear Electrical equipment - Power cables Electrical equipment - Cabling systems Boilers - Water tube boilers Boilers - Shell boilers Boilers - Boilers with fluidized bed fiting Boiler auxiliaries - Equipment for reduction of dust emissions Boiler auxiliaries - G

30、as-air, steam-air and gas-gas heaters Boiler auxiliaries - Draught plant Boiler auxiliaries - Fuel preparation equipment Boiler auxiliaries - Coal handling and bulk storage plant Boiler auxiliaries - Flue gas desulfurization (De-SJ plant Boiler auxiliaries - Ash handling plant Boiler auxiliaries - D

31、ust handling plant Boiler auxilianes - Sootblowers Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NQJ plant Part 5-1: Turbines - Steam turbines QBSI 01-2000 Page 5 EN 45510-7-1:1999 Part 5-2: Turbines - Gas turbines Part 5-3: Turbines - Wind turbines Part 5-4: Turbines - Hydraulic turb

32、ines, storage pumps and pump-turbines Part 6-7: Turbine auxiliaries - Deaerators Part 6-2: Turbine auxiliaries - Feedwater heaters Part 6-3: Turbine auxiliaries - Condenser plant Part 6-4: Turbine auxiliaries - Pumps Part 6-5: Turbine auxiliaries - Dry cooling systems Part 6-6: Turbine auxiliaries -

33、 Wet and wedry cooling towers Part 6-7: Turbine auxiliaries - Moisture separator reheaters Part 6-8: Turbine auxiliaries - Cranes Part 6-9: Turbine auxiliafies - Cooling wafer systems Part 7-1: Pipework and valves - High pressure piping systems Part 7-2: Pipework and valves - Boiler and high pressur

34、e piping valves Part 8-7: Control and instrumentation EN 45510 Part 1 contains those clauses common to all the above Guides giving the provisions of a non equipment specific nature for use in the procurement of power station plants. EN 4551 0 is the responsibility of JTFPE. The so called “common cla

35、uses“, as appropriate, also appear in italics in the documents specific to particular equipment. Where minor changes have been made to sentences in the “common clauses“ these are marked by a vertical line in the left margin. In this Guide, words in bold type indicate that they have the meaning given

36、 in the definitions, clause 3. In this Guide, words and sentences not in italics are specific to this Guide and refer to the particular eq u i pm e n t cove red. I OBSI 01-2000 STD-BSI BS EN 455LO-7-L-ENGL 2000 m 1624669 0824587 IL0 M Page 6 EN 45510-7-1:1999 I Scope This standard gives guidance on

37、writing the technical specification for the procurement of high pressure piping systems for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applicati

38、ons of such equipment have not been considered in the preparation of this Guide. This Guide covers: - Live steam lines - Hot reheat lines - Cold reheat lines - Feedwater lines - Spray water lines for HP and RH-attemperators and steam-bypass-systems - Pump minimum flow and balancing leak off lines -

39、Auxiliary steam supply lines - Condensate lines - Safety valve discharge pipelines - Bled steam pipelines - Steam and water drains, vents and warming lines The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated i

40、n performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - pre

41、dicted performance is achieved; - ancillaty equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.9. d

42、etailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchasers project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate pars of the enquiry; - any al/ocation of respons

43、ibi/ities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE: As a comprehensive European environmental policy is still under preparation, this Guide does not address the envimnmental implications of the equipment 2 Normative ref

44、erences This Guide for Procurement incorporates by dated or undated reference, provisions hm other publications. These normative references are cited in the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of

45、 these publications apply to this Guide only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. OBSI 01-2000 STDBBSI BS EN 45510-7-L-ENGL 2000 E lb24bb9 08211588 857 E Page 7 EN 45510-7-1:1999 EN IS0 9001 EN IS0 9002 I

46、EC 60050-197 Quality systems - Model for quality assurance in design, development, production, installation and servicing (IS0 9001:1994) Quality systems - Model for quality assurance in production, installation and servicing (IS0 9002: 7 994) International electrotechnical vocabulary - Chapter 197:

47、 Dependability and quality of service 3 Definitions For the purposes of this Guide, the following definitions apply. 3.7 Organizational terms 3.1. 1 purchaser: Recipient of a product and/or a service provided by a supplier. 3.7.2 supplier: Person or organization that provides a product and/or a serv

48、ice to the purchaser. 3.1.3 specification: Document stating technical requirements of the purchaser. It may form part of an enquiry issued by a purchaser. 3.1.4 enquiry: Invitation to tender issued by a purchaser. It will normally include a specification together with the necessary contractual and c

49、ommercial conditions. 3.7.5 tender: Offer made by a tenderer in response to an enquiry. 3.7.6 tenderer: Person or organization submitting a tender for the equipment in response to the enquiry. 3.1.7 site: Place to which the equipment is to be delivered or where work is to be done by the supplier, together with so much of the area surrounding as the supplier may, with the consent of the purchaser, use for the purposes of the contract. NOTE: Further definitions of useful organizational terms may be found in EN IS0 8402 (see Bibliography). 3.2 Technical terms