EN 15269-1-2010 en Extended application of test results for fire resistance and or smoke control for door shutter and openable window assemblies including their elements of buildin.pdf

《EN 15269-1-2010 en Extended application of test results for fire resistance and or smoke control for door shutter and openable window assemblies including their elements of buildin.pdf》由会员分享，可在线阅读，更多相关《EN 15269-1-2010 en Extended application of test results for fire resistance and or smoke control for door shutter and openable window assemblies including their elements of buildin.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN15269-1:2010ICS 13.220.50; 91.060.50NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDExtended applicationof test results forfire resistance and/or smoke control fordoor, shutter andopenable windowassemblies, includingtheir elements ofbuilding hardwarePart 1:

2、 General requirementsThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 30 April2010. BSI 2010ISBN 978 0 580 55699 9Amendments/corrigenda issued since publicationDate CommentsBS EN 15269-1:2010National forewordThis British Standard is the UK impleme

3、ntation of EN 15269-1:2010.The UK participation in its preparation was entrusted to TechnicalCommittee FSH/22/5, Fire resistance tests for doors.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the neces

4、sary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 15269-1:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15269-1 March 2010 ICS 13.220.50; 91.060.50 English Version Extended

5、application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements Application tendue des rsultats dessais en matire de rsistance au feu et/ou dtanchit la fume des blocs-p

6、ortes, blocs-fermetures et ouvrants de fentre, y compris leurs lments de quincaillerie intgrs - Partie 1: Exigences gnrales Erweiterter Anwendungsbereich von Prfergebnissen zur Feuerwiderstandsfhigkeit und/oder Rauchdichtigkeit von Tren, Toren und Fenstern einschlielich ihrer Baubeschlge - Teil 1: A

7、llgemeine Anforderungen This European Standard was approved by CEN on 23 January 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists

8、 and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respo

9、nsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hu

10、ngary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Cen

11、tre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15269-1:2010: EBS EN 15269-1:2010EN 15269-1:2010 (E) 2 Contents Page Foreword 3Introduction . 41 Scope 52 Normative references 53 Definitio

12、ns 54 General principles of extended application for fire resisting and/or smoke control door, shutter and openable window assemblies 75 Determination of the field of extended application 86 Extended application report . 107 Classification report 10Bibliography 11BS EN 15269-1:2010EN 15269-1:2010 (E

13、) 3 Foreword This document (EN 15269-1:2010) has been prepared by Technical Committee CEN/TC 127 “Fire safety in buildings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement,

14、 at the latest by September 2010, and conflicting national standards shall be withdrawn at the latest by September 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identify

15、ing any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). According to the CEN/CENELEC Internal Regulations, the national standards organi

16、zations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Port

17、ugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15269-1:2010EN 15269-1:2010 (E) 4 Introduction This document is one of a series of standards listed below and intended to be used for the purpose of producing an extended application report based on the evalu

18、ation of one or more fire resistance and/or smoke control tests. These standards may also be used to identify the best selection of test specimens required to cover a wide range of product variations. EN 15269, Extended application of test results for fire resistance and/or smoke control for door, s

19、hutter and openable window assemblies, including their elements of building hardware, consists of the following parts: Part 1: General requirements Part 2: Fire resistance of hinged and pivoted steel doorsets (in preparation) Part 3: Fire resistance of hinged and pivoted timber doorsets and openable

20、 timber framed windows (in preparation) Part 7: Fire resistance for steel sliding doorsets Part 10: Fire resistance of steel rolling shutters (in preparation) Part 11: Fire resistance of operable fabric curtains (in preparation) Part 20: Smoke control for hinged and pivoted steel, timber and metal f

21、ramed glazed doorsets A review of the doorset construction parameters can indicate that one or more characteristics may be improved by a particular parameter variation. All evaluations shall be made on the basis of retaining the fire resistance classifications obtainable from testing to EN 1634-1, i

22、ncluding those lower than the test duration, or the smoke control classifications obtainable from testing to EN 1634-3. However, this will never lead to an increased classification for any specific fire or smoke performance parameter beyond that achieved during any one test unless specifically ident

23、ified in the relevant Construction Parameter Variation tables within this series of standards. The classification of the resistance to fire of door, shutter and openable window assemblies foresees the addition of the symbol “C“ indicating that the product also satisfies the requirements for durabili

24、ty of self-closing. The “C“ classification is complemented by the digits 0 to 5 according to the use category on the basis of details included in the relevant product standards. The effect on the “C“ classification following an extended application process is not addressed in this series of standard

25、s. BS EN 15269-1:2010EN 15269-1:2010 (E) 5 1 Scope This European Standard sets out the general principles for the extended application of test results obtained on fire resisting and smoke control doorsets, i.e. the types of pedestrian and industrial doors and openable windows listed in the Introduct

26、ion above when tested in accordance with EN 1634-1 and/or EN 1634-3. This document provides the general principles which are intended to be used in conjunction with the relevant part of EN 15269 depending upon the specific product type to be evaluated. The rules to evaluate the field of direct appli

27、cation of fire resisting or smoke control door, shutter and openable window assemblies are given in EN 1634-1 and EN 1634-3 respectively and are based on the results of a single test. These rules relate to the more common forms of product constructions for which experience of testing has provided th

28、e knowledge that such variations can be safely accepted. The extent of the permitted variations is generally conservative and is based on the minimum level of common agreement achieved. This European Standard identifies the principles to be followed during the preparation of the subsequent product r

29、elated standards of the EN 15269 series which define the rules for the permitted variations of products from the tested specimen. These rules, which are created in a committee by agreed expert opinion based on experience of fire resistance testing and interpolation of test results, will form the bas

30、is of the field of extended application. When these rules are applied by a body suitably notified for the purpose, they will lead to a classification suitable for the application of a CE marking to the modified product. 2 Normative references The following referenced documents are indispensable for

31、the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1363-1:1999, Fire resistance tests Part 1: General requirements EN 1634-1:2008, Fire resistance and smo

32、ke control tests for door, shutter and openable window assemblies and elements of building hardware Part 1: Fire resistance tests for doors, shutters and openable windows EN 1634-3:2004, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of buildin

33、g hardware Part 3: Smoke control test for door and shutter assemblies EN 12519:2004, Windows and pedestrian doors Terminology EN 13501-2:2007, Fire classification of construction products and building elements Part 2: Classification using data from fire resistance tests, excluding ventilation servic

34、es prEN 15725, Extended application reports on the fire performance of construction products and building elements EN ISO 13943:2000, Fire safety Vocabulary (ISO 13943:2000) 3 Definitions For the purposes of this document, the definitions given in EN 1363-1:1999, EN 1634-1:2008, EN 1634-3:2004, EN 1

35、2519:2004 and EN ISO 13943:2000 and the following apply. BS EN 15269-1:2010EN 15269-1:2010 (E) 6 3.1 test result outcome of a testing process and its associated procedures detailed within a specific test standard (which may include some processing of the results from testing of a number of specimens

36、) NOTE A test result is expressed in terms of one or more fire performance parameter(s). 3.2 direct field of application of test results outcome of a process (involving the application of defined rules) whereby a test result is deemed to be equally valid for variations in one or more of the product

37、properties and/or intended end use application(s) 3.3 extended field of application of test results outcome of a process (involving the application of defined rules that may incorporate calculation procedures) that predicts, for a variation of a product property and/or its intended end use applicati

38、on(s), a test result on the basis of one or more test results to the same standard 3.4 classification process defined in EN 13501, whereby the fire performance parameters obtained from the results of one test, or a set of tests, or from a process of extended application are compared with limiting va

39、lues for those parameters that are set as criteria for achieving a certain classification NOTE The relevant classes and related criteria for fire resistance, for reaction to fire and for external fire exposure to roofs are specified in Commission Decisions (2000/367/EC, 2000/147/EC and 2001/671/EC a

40、s respectively amended). 3.5 agreed expert opinion results of a dialogue between a group of experts who are accepted by their peers as being knowledgeable in a particular fire test and the performance of products in that test NOTE Such dialogue should take place within a recognised and properly cons

41、tituted forum, such as CEN/TC 127 or the CPD GNB FSG. These agreed expert opinions are then transformed into rules that may form the basis of extended application. Agreed expert opinion will lead to a classification suitable for the application of CE marking. 3.6 expert judgement view of a recognise

42、d expert in a particular fire test, and the performance of products in that test, that may be used for the purpose of interpreting or applying results of that test in connection with the application of the particular product into parts of works for the purposes of satisfaction of National Regulation

43、s NOTE Expert judgement cannot form any part of the extended application for CE marking but may be obtained by manufacturers as a voluntarily judgement outside of CE marking. 3.7 hinged and pivoted steel doorset or openable window doorset or openable window with a leaf (ves) constructed from steel a

44、nd for which the hinges or pivots are attached directly to the steel leaf which may be prepared to incorporate a glass vision panel 3.8 hinged and pivoted timber doorset or openable window doorset or openable window with a leaf (ves) constructed from timber based material and for which the hinges or

45、 pivots are attached directly to the timber leaf which may be prepared to incorporate a glass vision panel BS EN 15269-1:2010EN 15269-1:2010 (E) 7 3.9 hinged and pivoted metal framed glazed doorset or openable window doorset or openable window with a leaf (ves) constructed from proprietary steel or

46、aluminium designed to incorporate large areas of glass and where the hinges or pivots are attached directly to the metal profile section 3.10 hinged and pivoted glass doorset doorset where the leaf (ves) is a glass panel which may or may not have a decorative perimeter section attached, but where th

47、e hinges or pivots are attached directly to the glass panel 3.11 sliding timber doorset doorset with a leaf (ves) constructed from one or more panels of timber material where the supporting elements are connected to the timber leaf 3.12 sliding steel doorset doorset with a leaf (ves) constructed fro

48、m one or more panels of steel material where the supporting elements are connected to the steel leaf 3.13 horizontally folding timber doorset doorset with a leaf (ves) constructed from a series of timber panels where any hinges or supporting elements are connected to the timber panels 3.14 horizonta

49、lly folding steel doorset doorset with a leaf (ves) constructed from a series of steel panels, with or without a lattice based gate support, where any hinges or supporting elements are connected to the steel panels or gate frame structure 3.15 steel rolling shutter doorset with a leaf constructed from a series of lateral steel sections which are made to coil around a supporting barrel or bar during the opening operation 3.16 openable fabric curtain doorset with a leaf constructed from woven material combined wi