EN 14967-2006 en Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics《防水用柔性薄板 沥青防潮层 定义和特征》.pdf

《EN 14967-2006 en Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics《防水用柔性薄板 沥青防潮层 定义和特征》.pdf》由会员分享，可在线阅读，更多相关《EN 14967-2006 en Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics《防水用柔性薄板 沥青防潮层 定义和特征》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 14967:2006ICS 91.100.50NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDFlexible sheets forwaterproofing Bitumen damp proofcourses Definitionsand characteristicsThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommitt

2、ee on 30 June2009. BSI 2009ISBN 978 0 580 54459 0Amendments/corrigenda issued since publicationDate CommentsBS EN 14967:2006National forewordThis British Standard is the UK implementation of EN 14967:2006.The UK participation in its preparation was entrusted to TechnicalCommittee B/546/6, Damp proof

3、 courses for masonry.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot co

4、nfer immunityfrom legal obligations.BS EN 14967:2006EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14967May 2006ICS 91.100.50English VersionFlexible sheets for waterproofing - Bitumen damp proof courses- Definitions and characteristicsFeuilles souples dtanchit - Feuilles bitumineuses contreles re

5、montes capillaires dans les murs - Dfinitions etcaractristiquesAbdichtungsbahnen - Bitumen-Mauersperrbahnen -Definitionen und EigenschaftenThis European Standard was approved by CEN on 27 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditi

6、ons for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three offic

7、ial versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belg

8、ium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZAT

9、IONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14967:2006: EBS EN 14967:2006EN 14967:2006 (E) 2 Contents Page

10、 Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Product types.7 5 Product characteristics.7 5.1 General7 5.2 Deviation from test sample dimensions7 5.3 Visible defects7 5.4 Dimensions and tolerances7 5.5 Thickness and mass per unit area.7 5.6 Watertightness

11、.8 5.7 Resistance to impact.8 5.8 Durability 8 5.8.1 Against artificial ageing/degradation 8 5.8.2 Against chemicals .8 5.9 Flexibility at low temperatures (pliability) .8 5.10 Resistance to tearing (nail shank) .8 5.11 Joint strength.8 5.12 Water vapour transmission properties8 5.13 Reaction to fir

12、e.9 5.14 Dangerous substances .9 6 Evaluation of conformity.9 6.1 General9 6.2 Initial type testing 9 6.2.1 General9 6.2.2 Sampling 11 6.3 Factory production control (FPC) . 11 6.3.1 General. 11 6.3.2 Frequency of testing 11 7 Product data sheet . 12 8 Marking, labelling and packaging . 12 Annex A (

13、informative) Information about chemical resistance . 13 Annex B (informative) Example of product data sheet. 15 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive. 17 Bibliography. 24 BS EN 14967:2006EN 14967:2006 (E) 3 Forewo

14、rd This document (EN 14967:2006) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for waterproofing”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at

15、 the latest by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).

16、 For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Cz

17、ech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 14967:2006EN 14967:2006 (E) 4 Introductio

18、n The purpose of damp proof courses is to prevent water rising up a wall from the ground, water moving from one part of a wall to another and to deflect water from an inner wall of a cavity wall construction to the exterior of the building. Damp proof courses may also be used in masonry chimneys and

19、 parapet walls to protect the inside of the building from water moving down from above. They should be designed in conjunction with flashings and sheets for waterproofing, including roofing sheets and damp proof sheets, to ensure a continuous barrier and should deflect water to the exterior of a bui

20、lding so that it can drain away safely. BS EN 14967:2006EN 14967:2006 (E) 5 1 Scope This European Standard specifies the characteristics of flexible sheets of bitumen intended for use as damp proof courses for buildings. It specifies the requirements and test methods and provides for the evaluation

21、of conformity of the products with the requirements of this European Standard. This European Standard does not cover related products such as preformed cavity trays, coping and flashings. 2 Normative references The following referenced documents are indispensable for the application of this document

22、. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1109, Flexible sheets for waterproofing Bitumen sheets for roof waterproofing Determination of flexibility at low temperature EN 1296,

23、Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature EN 1847, Flexible sheets for waterproofing Plastic and rubber sheets for roof waterproofing Methods for exposure to liquid chemicals, includi

24、ng water EN 1848-1, Flexible sheets for waterproofing Determination of length, width and straightness Part 1: Bitumen sheets for roof waterproofing EN 1849-1, Flexible sheets for waterproofing Determination of thickness and mass per unit area Part 1: Bitumen sheets for roof waterproofing EN 1850-1,

25、Flexible sheets for waterproofing Determination of visible defects Part 1: Bitumen sheets for roof waterproofing EN 1928, Flexible sheets for waterproofing Bitumen, plastic and rubber sheets for roof waterproofing Determination of watertightness EN 1931, Flexible sheets for waterproofing Bitumen, pl

26、astic and rubber sheets for roof waterproofing Determination of water vapour transmission properties EN 12310-1, Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank) EN 12317-1, Flexible sheets for waterproofing Part 1: Bi

27、tumen sheets for roof waterproofing Determination of shear resistance of joints EN 12691, Flexible sheets for waterproofing Bitumen, plastic and rubber sheets for roof waterproofing Determination of resistance to impact EN 13416:2001, Flexible sheets for waterproofing Bitumen, plastic and rubber she

28、ets for roof waterproofing Rules for sampling EN 13501-1:2002, Fire classification of construction products and building elements Part 1: Classification using test data from reaction to fire tests EN ISO 11925-2, Reaction to fire tests - Ignitability of building products subjected to direct impingem

29、ent of flame - Part 2: Single-flame source test (ISO 11925-2:2002) BS EN 14967:2006EN 14967:2006 (E) 6 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13416:2001 and the following apply: 3.1 waterproofing action to prevent the passage of water from on

30、e plane to another 3.2 waterproofing sheet factory-made flexible sheet including any carriers, facings, surface texture and/or backing 3.3 bitumen damp proof course flexible sheets of bitumen or composites based on these materials whose function is to prevent liquid water passing from one part of th

31、e wall to another. In composite sheets the bitumen is the functional component 3.4 carrier material incorporated into or onto the factory-made waterproofing sheet to ensure its stability and/or mechanical resistance 3.5 surfacing material applied to the surfaces of waterproofing sheets as an anti-st

32、icking substance on one or both surfaces of the damp proof course 3.6 manufacturers limiting value (MLV) value stated by the manufacturer to be met during testing. The manufacturers limiting value can be a minimum or a maximum value according to statements made under product characteristics of this

33、European Standard 3.7 manufacturers declared value (MDV) value declared by the manufacturer accompanied by a declared tolerance 3.8 oxidised bitumen straight run petroleum bitumen or a fluxed bitumen which has been hardened and rendered less temperature susceptible by blowing with air at high temper

34、ature with or without the use of a catalyst 3.9 elastomeric bitumen petroleum bitumen and/or oxidized bitumen modified by the addition of thermoplastic rubbers 3.10 plastomeric bitumen petroleum bitumen and/or oxidized bitumen modified by the addition of polyolefin or polyolefin copolymer compound 3

35、.11 sampling procedure used to select or constitute a sample 3.12 sample sheet from which a test piece is taken BS EN 14967:2006EN 14967:2006 (E) 7 3.13 test piece part of the sample from which test specimens are taken 3.14 test specimen piece of precise dimensions taken from the test piece 4 Produc

36、t types For bitumen damp proof courses there are no product types. 5 Product characteristics 5.1 General 5.1.1 Where a tolerance is limited by this European Standard it does not have to be declared by the manufacturer. 5.1.2 When tested for purposes other than initial type testing or factory product

37、ion control, the tests to determine product characteristics indicated in this European Standard shall be started within 1 month of delivery of the product from the manufacturer. 5.2 Deviation from test sample dimensions Where the contours of the product make it impossible to obtain a test sample of

38、the required dimensions, or otherwise render the test impracticable, testing may be carried out either on samples of different dimensions or if still impracticable on the equivalent flat sheet of the same thickness as the finished product. Any such deviations from the test method shall be recorded o

39、n the test report and the product data sheet. 5.3 Visible defects The product shall be free of visible defects determined in accordance with EN 1850-1. 5.4 Dimensions and tolerances The length, width and straightness shall be determined in accordance with EN 1848-1. The length and width shall be gre

40、ater than or equal to the manufacturers limiting value (MLV). The maximum deviation from straightness shall not exceed 20 mm per 10 m length, or in proportion for other lengths (e.g. 10 mm per 5 m length). 5.5 Thickness and mass per unit area The thickness and mass per unit area shall be determined

41、in accordance with EN 1849-1. Where a product is specified by mass per unit area, the mass shall lie within the declared tolerance of the manufacturers declared value. Where it is not practicable to obtain a sample (see 5.2), a larger sample area shall be used and the deviation from the test method

42、noted. If a product is specified by thickness, the thickness shall lie within the tolerance of the manufacturers declared value. No single measurement shall lie outside the declared tolerance of the manufacturers declared value. BS EN 14967:2006EN 14967:2006 (E) 8 5.6 Watertightness Watertightness s

43、hall be determined by Method A or B of EN 1928 using a pressure of 2 kPa and shall give a pass result. 5.7 Resistance to impact Resistance to impact shall be evaluated when subject to regulatory requirements, and may be evaluated when not subject to such requirements. It shall be determined in accor

44、dance with EN 12691 and the result shall be greater than or equal to the manufacturers limiting value. 5.8 Durability 5.8.1 Against artificial ageing/degradation In order to verify the artificial ageing behaviour of the product, watertightness shall be determined after exposure in accordance with EN

45、 1296 for a period of 12 weeks. The watertightness shall be determined in accordance with EN 1928 Method A or B at a pressure of 2 kPa and shall give a pass result. 5.8.2 Against chemicals Information about the chemical resistance of bitumen is given in Annex A. Where the product is likely to come i

46、nto contact with a “not stable in all cases“ substance, the resistance shall be evaluated according to EN 1847, the test parameters being declared with the result, and subsequently tested according to EN 1928, giving a pass result. NOTE Experience has shown that water has little or no effect upon th

47、e in-service performance of reinforced bitumen sheets. 5.9 Flexibility at low temperatures (pliability) The flexibility at low temperature shall be evaluated when subject to regulatory requirements, and may be evaluated when not subject to such requirements. It shall be determined in accordance with

48、 EN 1109 and shall be less than or equal to the manufacturers limiting value. NOTE This test does not give results corresponding to the application conditions in practice. Results should be used only to compare products of similar thickness and construction. 5.10 Resistance to tearing (nail shank) W

49、here required, the tear resistance (nail shank) shall be determined in accordance with EN 12310-1 and the results shall lie within the declared tolerance of the manufacturers declared value. 5.11 Joint strength Where required, the joint strength shall be determined in accordance with EN 12317-1 and the results shall lie within the declared tolerance of the manufacturers declared value. 5.12 Water vapour transmission properties Where required, the water vapour transmission properties shall be determined in accordance with E