EN 14609-2004 en Windows - Determination of the resistance to static torsion《窗 耐静态扭转的测定》.pdf

《EN 14609-2004 en Windows - Determination of the resistance to static torsion《窗 耐静态扭转的测定》.pdf》由会员分享，可在线阅读，更多相关《EN 14609-2004 en Windows - Determination of the resistance to static torsion《窗 耐静态扭转的测定》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 14609:2004 Windows Determination of the resistance to static torsion The European Standard EN 14609:2004 has the status of a British Standard ICS 91.060.50 BS EN 14609:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee o

2、n 16 June 2004 BSI 16 June 2004 ISBN 0 580 43942 9 National foreword This British Standard is the official English language version of EN 14609:2004. The UK participation in its preparation was entrusted by Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling, to Subcomm

3、ittee B/538/1, Windows, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in th

4、e BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible

5、for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK i

6、nterests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright notice displayed in this document indicates whe

7、n the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN14609 June2004 ICS91.060.50 Englishversion WindowsDeterminationoftheresistancetostatictorsion FentresDterminationdelarsistancelatorsion statique FensterErmittlun

8、gderWiderstandsfhigkeitgegen statischeVerwindung ThisEuropeanStandardwasapprovedbyCENon1September2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliograph

9、icalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtothe

10、CentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Sloven

11、ia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN14609:2004:EE

12、N 14609:2004 (E) 2 Contents 1 Scope4 2 Normative references4 3 Terms and definitions .4 4 Apparatus.4 5 Test specimen4 6 Conditioning and preparation of the test specimen 5 6.1 Conditioning.5 6.2 Preparation.5 7 Procedure.5 8 Expression of results5 9 Test report5 Annex A (normative) Figures .6 EN 14

13、609:2004 (E) 3 Foreword This document (EN 14609:2004) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by pu

14、blication of an identical text or by endorsement, at the latest by December 2004, and conflicting national standards shall be withdrawn at the latest by December 2004. It is part of a series of standards for windows. This document supersedes 8.2.1 Warping of EN 107:1980. Annex A is normative. Accord

15、ing to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuani

16、a, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 14609:2004 (E) 4 1 Scope This European Standard specifies the determination of resistance to static torsion of an open casement, expressed as loads and the resulting

17、 maximum and residual deformations. This European Standard applies to the opening modes specified in Figures A.1 to A.5 and included in EN 12519. This European Standard is not applicable to the sashes of sliding windows. 2 Normative references This European Standard incorporates by dated or undated

18、reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when inco

19、rporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 12519, Windows and pedestrian doors Terminology. 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in

20、 EN 12519 apply, together with the following: 3.1 static torsion twist induced in a casement by the application of a static load to an extreme free corner edge of that casement and normal to its plane when an adjacent corner edge is secured 4 Apparatus A surrounding substantial steel frame with mova

21、ble steel supports 1 )into which the sub-frames containing test specimens of various dimensions can be mounted. Means for the application of forces with an accuracy of 5 % uniformly and without shock. An analogue or digital measuring instrument for determining measurements with an accuracy of 0,1 mm

22、. 5 Test specimen The test specimen shall be supplied in a fully operable condition. It shall be suitable for fixing into the surround frame in accordance with the manufacturers published recommendations or standardized instructions. 1) A suitable frame would, for example, be of such stiffness that

23、the mid span deflection of any member of the frame does not exceed 1/500 of its unsupported length under the action of a force of 1 kN applied at any point or direction perpendicular to the length of that member. EN 14609:2004 (E) 5 6 Conditioning and preparation of the test specimen 6.1 Conditionin

24、g Storage and testing shall be carried out in a non-destructive environment within the ranges of 10 C to 30 C and 25 % to 75 % relative humidity. 6.2 Preparation Remove all transport blocks, bracings, packaging and protective wrappings from the test specimen. The test specimen shall be mounted level

25、, square and without visible twist resulting from the use of fixing devices. 7 Procedure When carrying out the test (see Figure A.6) the following shall be taken into account. Having disengaged any restricting devices, open and close the test specimen five times before the test to its maximum extent

26、 or 90, whichever is greater. For windows with more than a single leaf the first test shall be to the main leaf. When testing multi-function windows such as those that tilt and turn, each function shall be tested separately. The most common usage shall be tested first (e. g. tilt before turn). To ta

27、ke up any slack in hinges or pivots, if fitted, apply a pre-load of 10 % of the maximum test load or a minimum of 20 N according to Figures A.1 to A.5. Remove the pre-load and measure the deformation (a 0 ). Apply the static test load F according to Figures A.1 to A.5 and measure the deformation (a

28、1 ) under the test load. Remove the test load and measure the deformation (a 2 ). Apply and remove all loads continuously to avoid dynamic effects. Apply the loads in increments of a maximum of 100 N and over a minimum of 1 s for each increment. 8 Expression of results Note the loads, together with

29、the maximum (a 1 a 0 ) and residual (a 2 a 0 ) deformations measured during the test. Express loads in Newtons (N) to three significant figures and deformations in millimetres (mm) to two significant figures. 9 Test report The test report shall contain at least the following information: a) referenc

30、e to this European Standard; b) name of the test laboratory; c) name of the manufacturer and applicant; d) date of test and test report; e) all relevant details for identifying the test specimen and apparatus the type; the specified dimensions; the materials; form and mode of opening; f) test result

31、s; g) permanent damage to the test specimen. EN 14609:2004 (E) 6 Annex A (normative) Figures Key a 90 or max. opening angle 1 Blocked corner Figure A.1 Side hung casement Key a 90 or max. opening angle 1 Blocked corner Figure A.2 Bottom hung casement EN 14609:2004 (E) 7 Key a 90 or max. opening angl

32、e 1 Blocked corner Figure A.3 Top hung casement Key a 90 or max. opening angle 1 Blocked corner Figure A.4 Horizontal pivot casement EN 14609:2004 (E) 8 Key a 90 or max. opening angle 1 Blocked corner Figure A.5 Vertical pivot casement EN 14609:2004 (E) 9 Key F max Maximum test load 0,1F a 0,1F maxo

33、r 20 N t Time X Opening and closing O Measurement a xMeasured values Figure A.6 Diagram BS EN 14609:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards i

34、n Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our

35、 products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7

36、400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 899

37、6 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requ

38、ested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and servic

39、es. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Me

40、mbership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Co

41、pyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitte

42、d in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.