EN 14306-2013 6875 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification《建筑设备和工业装置用隔热产品 工厂制硅.pdf

《EN 14306-2013 6875 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification《建筑设备和工业装置用隔热产品 工厂制硅.pdf》由会员分享，可在线阅读，更多相关《EN 14306-2013 6875 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification《建筑设备和工业装置用隔热产品 工厂制硅.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 14306:2009ICS 91.100.60NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDThermal insulationproducts for buildingequipment andindustrial installations Factory madecalcium silicate(CS) products Specification+A1:2013Copyright European Committee for Standardizat

2、ion Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 14306:2009+A1:2013. It supersedes BS EN 14306:2009, which is withdrawn.The start and finish of text intro

3、duced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK participation in its preparation was entrusted by Technical Committee B/540, Energy perform

4、ance of materials, components and buildings, to Subcommittee B/540/6, Fibrous and inorganic thermal insulation materials.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a

5、 contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 14306:2009+A1:2013This British Standardwas published underthe authority of theStandards Policy andStrategy Committee on 31January 2010 The British Stand

6、ards Institution 2013. Published by BSI Standards Limited 2013Amendments/corrigenda issued since publicationDate Comments 31 May 2013 Implementation of CEN amendment A1:2013ISBN 978 0 580 78175 9Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo r

7、eproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14306:2009+A1 January 2013 ICS 91.100.60 Supersedes EN 14306:2009English Version Thermal insulation products for building equipment and industrial installations - Factory made calciu

8、m silicate (CS) products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manufacturs en silicate de calcium (CS) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - W

9、erkmig hergestellte Produkte aus Calciumsilikat (CS) -Spezifikation This European Standard was approved by CEN on 29 September 2009 and includes Amendment 1 approved by CEN on 11 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions f

10、or giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in thr

11、ee official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bo

12、dies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

13、Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN

14、 national Members. Ref. No. EN 14306:2009+A1:2013: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 14306:2009+A1:2013 (E) 2 Contents Page Foreword 3 1 Scope 5 2 Normative ref

15、erences 5 3 Terms, definitions, symbols, units and abbreviated terms .6 4 Requirements .9 5 Test methods . 13 6 Designation code 16 7 Evaluation of conformity 16 8 Marking and labelling . 17 Annex A (normative) Factory production control . 18 Annex B (normative) Determination of minimum service temp

16、erature 21 Annex C (informative) Preparation of the test specimens to measure thermal conductivity 25 Annex D (informative) Additional properties . 26 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive. 28 Bibliography . 36 Fi

17、gures Figure ZA.1 Example of CE marking information 35 Tables Table 1 Dimensional tolerances . 10 Table 2 Levels for maximum service temperature . 12 Table 3 Levels for compressive stress at 10 % deformation or compressive strength 12 Table 4 Test methods, test specimens and conditions. 14 Table A.1

18、 Minimum product testing frequencies . 18 Table A.2 Minimum product testing frequencies for the reaction to fire characteristics 20 Table D.1 Test methods, specimens and conditions 27 Table ZA.1 Relevant clauses 29 Table ZA.2 System(s) of attestation of conformity 30 Table ZA.3 Assignment of evaluat

19、ion of conformity tasks for products under system 1 . 31 Table ZA.4 Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire 32 BS EN 14306:2009+A1:2013Copyright European Committee for Standardization Provided by IHS under licen

20、se with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 14306:2009+A1:2013 (E) 3 Foreword This document (EN 14306:2009+A1:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by

21、 DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some o

22、f the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14309:2009. This document includes Amendment 1 approved by CEN on 2012-11-11. The start and finish of text

23、introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/106/EEC. For relationship with EU Directive

24、89/106/EEC, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties outside th

25、e provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected or because of safety regulations. This European Standard contains six annexes: Annex A (normative), Factory production contro

26、l Annex B (normative), Testing for reaction to fire Annex C (normative), Determination of minimum service temperature Annex D (informative), Preparation of the test specimens to measure thermal conductivity Annex E (informative), Additional properties Annex ZA (informative), Clauses of this European

27、 Standard addressing the provisions of the EU Construction Products Directive This document includes a bibliography. This European Standard is one of a series of standards for insulation products used in building equipment and industrial installations, but this standard can be used in other areas, w

28、here appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict with the European standards of th

29、is package. BS EN 14306:2009+A1:2013Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 14306:2009+A1:2013 (E) 4 The package of standards comprises the following group of interrel

30、ated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insula

31、tion products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal in

32、sulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14307,Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Therm

33、al insulation products for building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded pol

34、ystyrene (EPS) Specification EN 14313, Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF)

35、 products Specification According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic o

36、f Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14306:2009+A1:2013Copyright European Committee for Standa

37、rdization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 14306:2009+A1:2013 (E) 5 1 Scope This European Standard specifies the requirements for factory made calcium silicate products which are used for the thermal insulatio

38、n of building equipment and industrial installations with an operating temperature range of approximately - 170 C to + 1 100 C. NOTE Calcium silicate products can be used below - 50 C. Below the operating temperature of - 50 C, special tests, regarding the suitability of the product in the intended

39、application are advised (e.g. liquefaction of oxygen). Manufacturers advice should be heeded in all cases. The products are manufactured in the form of boards, pipe sections, segments and prefabricated ware. This standard describes product characteristics and includes procedures for testing, evaluat

40、ion of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. This standard does not specify the required level or class of

41、 a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,6 W/(mK) at 10 C are n

42、ot covered by this standard. This standard does not cover products intended to be used for the insulation of the building structure. This standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index. 2 Normative references The followi

43、ng referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building application

44、s Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatne

45、ss EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 993-14, Methods of testing dense shaped refractory products Part 14: Determination of thermal conductivity by the hot-wire (cross-array) method EN 1094-6, Insulating refractory products Part 6:

46、 Determination of permanent change in dimensions of shaped products on heating (ISO 2477:1987, modified) EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions BS EN 14306:2009+A1:2013Copyright Europea

47、n Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 14306:2009+A1:2013 (E) 6 EN 1609, Thermal insulating products for building applications Determination of short term water absorption by partial

48、immersion EN 12086, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12667, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Thick products of high and medium thermal resistance EN 13172, Thermal