EN 14306-2009 8125 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification《建筑设备和工业装置用热绝缘产品 工厂制.pdf

《EN 14306-2009 8125 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification《建筑设备和工业装置用热绝缘产品 工厂制.pdf》由会员分享，可在线阅读，更多相关《EN 14306-2009 8125 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification《建筑设备和工业装置用热绝缘产品 工厂制.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 14306:2009ICS 91.100.60NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDThermal insulationproducts for buildingequipment andindustrial installations Factory madecalcium silicate(CS) products SpecificationCopyright European Committee for Standardization Prov

2、ided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31January 2010 BSI 2010ISBN 978 0 580 53418 8Amendments/corrigenda issued sin

3、ce publicationDate CommentsBS EN 14306:2009National forewordThis British Standard is the UK implementation of EN 14306:2009. The UK participation in its preparation was entrusted to TechnicalCommittee B/540/6, Fibrous and inorganic thermal insulation materials. A list of organizations represented on

4、 this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunityfrom legal obligations.Copyright European Com

5、mittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14306:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14306 November 2009 ICS 91.100.60 English Version Thermal insulation products for b

6、uilding equipment and industrial installations - Factory made calcium silicate (CS) products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manufacturs en silicate de calcium (CS) - Spcification Wrmedmmstoffe fr die technische Ge

7、budeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Calciumsilikat (CS) -Spezifikation This European Standard was approved by CEN on 29 September 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condi

8、tions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in thre

9、e official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of A

10、ustria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN C

11、OMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14306:2009: ECopyright European Co

12、mmittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14306:2009EN 14306:2009 (E) 2 Contents Page Foreword 31 Scope 52 Normative references 53 Terms, definitions, symbols, units and abbreviated terms

13、 .64 Requirements .95 Test methods . 136 Designation code 167 Evaluation of conformity 168 Marking and labelling . 17Annex A (normative) Factory production control . 18Annex B (normative) Determination of minimum service temperature 21Annex C (informative) Preparation of the test specimens to measur

14、e thermal conductivity 25Annex D (informative) Additional properties . 26Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive. 28Bibliography . 36Figures Figure ZA.1 Example of CE marking information 35Tables Table 1 Dimensional

15、 tolerances . 10 Table 2 Levels for maximum service temperature . 12 Table 3 Levels for compressive stress at 10 % deformation or compressive strength 12 Table 4 Test methods, test specimens and conditions. 14 Table A.1 Minimum product testing frequencies . 18 Table A.2 Minimum product testing frequ

16、encies for the reaction to fire characteristics 20 Table D.1 Test methods, specimens and conditions 27 Table ZA.1 Relevant clauses 29 Table ZA.2 System(s) of attestation of conformity 30 Table ZA.3 Assignment of evaluation of conformity tasks for products under system 1 . 31 Table ZA.4 Assignment of

17、 evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire 32 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14306

18、:2009EN 14306:2009 (E) 3 Foreword This document (EN 14306:2009) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of a

19、n identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by August 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be hel

20、d responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/106/EEC. For relationship with EU Directive 89/106/EEC,

21、 see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties outside the provision

22、s of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected or because of safety regulations. This European Standard contains six annexes: Annex A (normative), Factory production control Annex B (

23、normative), Testing for reaction to fire Annex C (normative), Determination of minimum service temperature Annex D (informative), Preparation of the test specimens to measure thermal conductivity Annex E (informative), Additional properties Annex ZA (informative), Clauses of this European Standard a

24、ddressing the provisions of the EU Construction Products Directive This document includes a bibliography. This European Standard is one of a series of standards for insulation products used in building equipment and industrial installations, but this standard can be used in other areas, where approp

25、riate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict with the European standards of this package.

26、 The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations Factory mad

27、e mineral wool (MW) products Specification Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14306:2009EN 14306:2009 (E) 4 EN 14304, Thermal insulation products for building

28、equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for build

29、ing equipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14307,Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for

30、building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specificatio

31、n EN 14313, Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification Acc

32、ording to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lat

33、via, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted witho

34、ut license from IHS-,-,-BS EN 14306:2009EN 14306:2009 (E) 5 1 Scope This European Standard specifies the requirements for factory made calcium silicate products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approxi

35、mately - 170 C to + 1 100 C. NOTE Calcium silicate products can be used below - 50 C. Below the operating temperature of - 50 C, special tests, regarding the suitability of the product in the intended application are advised (e.g. liquefaction of oxygen). Manufacturers advice should be heeded in all

36、 cases. The products are manufactured in the form of boards, pipe sections, segments and prefabricated ware. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefab

37、ricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. This standard does not specify the required level or class of a given property that shall be achieved by a product to demonstrate fitness for purpose in a parti

38、cular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,6 W/(mK) at 10 C are not covered by this standard. This standard does not cover products intended to be used for the insu

39、lation of the building structure. This standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated reference

40、s, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products for building applications D

41、etermination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826, Thermal insulating products for building applications Determination of compression behav

42、iour EN 993-14, Methods of testing dense shaped refractory products Part 14: Determination of thermal conductivity by the hot-wire (cross-array) method EN 1094-6, Insulating refractory products Part 6: Determination of permanent change in dimensions of shaped products on heating (ISO 2477:1987, modi

43、fied) EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted

44、 without license from IHS-,-,-BS EN 14306:2009EN 14306:2009 (E) 6 EN 1609, Thermal insulating products for building applications Determination of short term water absorption by partial immersion EN 12086, Thermal insulating products for building applications Determination of water vapour transmissio

45、n properties EN 12667, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and products Determination of

46、 thermal resistance by means of guarded hot plate and heat flow meter methods Thick products of high and medium thermal resistance EN 13172, Thermal insulating products Evaluation of conformity EN 13467, Thermal insulating products for building equipment and industrial installations Determination of

47、 dimensions, squareness and linearity of preformed pipe insulation EN 13468, Thermal insulating products for building equipment and industrial installations Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH EN 13469, Thermal insulating products for b

48、uilding equipment and industrial installations Determination of water vapour transmission properties of preformed pipe insulation EN 13472, Thermal insulating products for building equipment and industrial installations Determination of short term water absorption by partial immersion of preformed pipe insulation EN 13501-1:2007, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13639, Determination of total organic car