EN 845-3-2013 en Specification for ancillary components for masonry - Part 3 Bed joint reinforcement of steel meshwork (Incorporates Amendment A1 2016)《砖石附属元件规范 第3部分 钢网床联合加固》.pdf

《EN 845-3-2013 en Specification for ancillary components for masonry - Part 3 Bed joint reinforcement of steel meshwork (Incorporates Amendment A1 2016)《砖石附属元件规范 第3部分 钢网床联合加固》.pdf》由会员分享，可在线阅读，更多相关《EN 845-3-2013 en Specification for ancillary components for masonry - Part 3 Bed joint reinforcement of steel meshwork (Incorporates Amendment A1 2016)《砖石附属元件规范 第3部分 钢网床联合加固》.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 845-3:2013Specification for ancillarycomponents for masonryPart 3: Bed joint reinforcement of steelmeshworkBS EN 845-3:2013Incorporating corrigendum September 2013BS EN 845-3:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 845

2、-3:2013. Itsupersedes BS EN 845-3:2003+A1:2008 which is withdrawn.EN 845-3 specifies the characteristics and performance requirementsfor bed joint reinforcement available throughout the CEN membercountries. It aims to do so in product performance terms, avoidingas far as possible prescriptive requir

3、ements and all the traditionaldesignations of these products available throughout Europe.EN 845-3 includes clauses covering initial type tests, factoryproduction control, sampling for initial type testing andindependent testing of consignments. These are similar in allmasonry product specifications.

4、The UK National Annex NA attached to this standard provides aninformative commentary on EN 845-3. Nothing in this annex shouldbe construed as specifying requirements other than those containedin the normative parts of this European Standard.The UK participation in its preparation was entrusted to Te

5、chnicalCommittee B/519/3, Ancillary components.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standa

6、rds Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79416 2ICS 91.060.10; 91.080.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2

7、013.Amendments issued since publicationDate Text affectedBS EN 845-3:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 845-3:2013. Itsupersedes BS EN 845-3:2003+A1:2008 which is withdrawn.EN 845-3 specifies the characteristics and performance requirementsfor

8、bed joint reinforcement available throughout the CEN membercountries. It aims to do so in product performance terms, avoidingas far as possible prescriptive requirements and all the traditionaldesignations of these products available throughout Europe.EN 845-3 includes clauses covering initial type

9、tests, factoryproduction control, sampling for initial type testing andindependent testing of consignments. These are similar in allmasonry product specifications.The UK National Annex NA attached to this standard provides aninformative commentary on EN 845-3. Nothing in this annex shouldbe construe

10、d as specifying requirements other than those containedin the normative parts of this European Standard.The UK participation in its preparation was entrusted to TechnicalCommittee B/519/3, Ancillary components.A list of organizations represented on this committee can beobtained on request to its sec

11、retary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79416 2ICS 91.060.10; 91.080.30Compliance with a British Stand

12、ard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationDate Text affectedBS EN 845-3:2013 BRITISH STANDARDNational forewordThis British Standard is the U

13、K implementation of EN 845-3:2013. Itsupersedes BS EN 845-3:2003+A1:2008 which is withdrawn.EN 845-3 specifies the characteristics and performance requirementsfor bed joint reinforcement available throughout the CEN membercountries. It aims to do so in product performance terms, avoidingas far as po

14、ssible prescriptive requirements and all the traditionaldesignations of these products available throughout Europe.EN 845-3 includes clauses covering initial type tests, factoryproduction control, sampling for initial type testing andindependent testing of consignments. These are similar in allmason

15、ry product specifications.The UK National Annex NA attached to this standard provides aninformative commentary on EN 845-3. Nothing in this annex shouldbe construed as specifying requirements other than those containedin the normative parts of this European Standard.The UK participation in its prepa

16、ration was entrusted to TechnicalCommittee B/519/3, Ancillary components.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctappli

17、cation. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79416 2ICS 91.060.10; 91.080.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strat

18、egy Committee on 31 July 2013.Amendments issued since publicationDate Text affectedBS EN 845-3:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 845-3:2013. Itsupersedes BS EN 845-3:2003+A1:2008 which is withdrawn.EN 845-3 specifies the characteristics and pe

19、rformance requirementsfor bed joint reinforcement available throughout the CEN membercountries. It aims to do so in product performance terms, avoidingas far as possible prescriptive requirements and all the traditionaldesignations of these products available throughout Europe.EN 845-3 includes clau

20、ses covering initial type tests, factoryproduction control, sampling for initial type testing andindependent testing of consignments. These are similar in allmasonry product specifications.The UK National Annex NA attached to this standard provides aninformative commentary on EN 845-3. Nothing in th

21、is annex shouldbe construed as specifying requirements other than those containedin the normative parts of this European Standard.The UK participation in its preparation was entrusted to TechnicalCommittee B/519/3, Ancillary components.A list of organizations represented on this committee can beobta

22、ined on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79416 2ICS 91.060.10; 91.080.30Compl

23、iance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationDate Text affectedStandards Policy and Strategy Committee on 31 August 2

24、013.Amendments/corrigenda issued since publicationIf CE marking is performed, the procedures in Annex ZA will apply.The significance of the CE marking is that the product manufacturerclaims compliance with the “harmonized” requirements given inthe normative text of the product standard. These relate

25、 to theessential requirements of the EU Construction Products Directive.Not all product characteristics need necessarily be given on the CEmarking, but those product characteristics covered by regulationsin force in each EU Member State, where the manufacturer intendsthat the product will be used, d

26、o need to be stated.BS EN 845-3:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN 845-3 May 2013 ICS 91.080.30 Supersedes EN 845-3:2003+A1:2008English Version Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork Spcifications pour composants ac

27、cessoires de maonnerie - Partie 3 : Treillis darmature en acier pour joints horizontauxFestlegungen fr Ergnzungsbauteile fr Mauerwerk - Teil3: Lagerfugenbewehrung aus StahlThis European Standard was approved by CEN on 21 March 2013.CEN members are bound to comply with the CEN/CENELEC Internal Regula

28、tions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

29、This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CEN me

30、mbers are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,Luxembourg, Malta, Netherlands, Norway, Poland, Portug

31、al, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any me

32、ans reservedworldwide for CEN national Members.Ref. No. EN 845-3:2013: EBS EN 845-3:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 845-3:2013. It supersedes BS EN 845-3:2003+A1:2008 which will be withdrawn on 30 November 2013.EN 845-3 is the subject of tra

33、nsitional arrangements agreed under the Commission mandate. The Member States have agreed a transition period for the co-existence of EN 845-3 and their corresponding national standard(s). At the end of this co-existence period, that is at the end of November 2013, BS EN 845-3:2003+A1:2008 will be s

34、uperseded and withdrawn.Date Text affected30 September 2013 Correction to supersession detailsThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2013.echnical Committee B/519, Masonry and associated testing.ISBN 978 0 580 84266 5BS EN

35、845-3:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 845-3:2013. Itsupersedes BS EN 845-3:2003+A1:2008 which is withdrawn.EN 845-3 specifies the characteristics and performance requirementsfor bed joint reinforcement available throughout the CEN membercoun

36、tries. It aims to do so in product performance terms, avoidingas far as possible prescriptive requirements and all the traditionaldesignations of these products available throughout Europe.EN 845-3 includes clauses covering initial type tests, factoryproduction control, sampling for initial type tes

37、ting andindependent testing of consignments. These are similar in allmasonry product specifications.The UK National Annex NA attached to this standard provides aninformative commentary on EN 845-3. Nothing in this annex shouldbe construed as specifying requirements other than those containedin the n

38、ormative parts of this European Standard.The UK participation in its preparation was entrusted to TechnicalCommittee B/519/3, Ancillary components.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the nec

39、essaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79416 2ICS 91.060.10; 91.080.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British S

40、tandard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationDate Text affectedBS EN 845-3:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 845-3:2013. Itsupersedes BS EN 845-3:200

41、3+A1:2008 which is withdrawn.EN 845-3 specifies the characteristics and performance requirementsfor bed joint reinforcement available throughout the CEN membercountries. It aims to do so in product performance terms, avoidingas far as possible prescriptive requirements and all the traditionaldesigna

42、tions of these products available throughout Europe.EN 845-3 includes clauses covering initial type tests, factoryproduction control, sampling for initial type testing andindependent testing of consignments. These are similar in allmasonry product specifications.The UK National Annex NA attached to

43、this standard provides aninformative commentary on EN 845-3. Nothing in this annex shouldbe construed as specifying requirements other than those containedin the normative parts of this European Standard.The UK participation in its preparation was entrusted to TechnicalCommittee B/519/3, Ancillary c

44、omponents.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BS

45、I StandardsLimited 2013ISBN 978 0 580 79416 2ICS 91.060.10; 91.080.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicati

46、onDate Text affectedBS EN 845-3:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 845-3:2013. Itsupersedes BS EN 845-3:2003+A1:2008 which is withdrawn.EN 845-3 specifies the characteristics and performance requirementsfor bed joint reinforcement available thr

47、oughout the CEN membercountries. It aims to do so in product performance terms, avoidingas far as possible prescriptive requirements and all the traditionaldesignations of these products available throughout Europe.EN 845-3 includes clauses covering initial type tests, factoryproduction control, sam

48、pling for initial type testing andindependent testing of consignments. These are similar in allmasonry product specifications.The UK National Annex NA attached to this standard provides aninformative commentary on EN 845-3. Nothing in this annex shouldbe construed as specifying requirements other th

49、an those containedin the normative parts of this European Standard.The UK participation in its preparation was entrusted to TechnicalCommittee B/519/3, Ancillary components.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79416 2ICS 91.060.10; 91.080.30Compliance with a British Standard cannot confe