EN 81-2-1998 en Safety rules for the construction and installation of lifts - Part 2 Hydraulic lifts (Incorporates Amendment A3 2009 Remains Current)《电梯的建造和安装的安全规则 第2部分 液压梯 包含修改件A1.pdf

《EN 81-2-1998 en Safety rules for the construction and installation of lifts - Part 2 Hydraulic lifts (Incorporates Amendment A3 2009 Remains Current)《电梯的建造和安装的安全规则 第2部分 液压梯 包含修改件A1.pdf》由会员分享，可在线阅读，更多相关《EN 81-2-1998 en Safety rules for the construction and installation of lifts - Part 2 Hydraulic lifts (Incorporates Amendment A3 2009 Remains Current)《电梯的建造和安装的安全规则 第2部分 液压梯 包含修改件A1.pdf（230页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 81-2:1998Incorporating Corrigendum Safety rules for the construction and installation of lifts Part 2: Hydraulic liftsICS 91.140.90g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g

2、40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A3:2009September 1999National forewordThis British Standard is the UK implementation of EN 81-2:1998+A3:2009, incorporating corrigendum September 1999. It supersedes BS EN 81-2:1998, which will be withdrawn on 12 May 2011, and BS 5655-2:1988, whi

3、ch has been declared obsolescent.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The start and finish of text

4、introduced or altered by corrigendum is indicated in the text by tags. Text altered by CEN corrigendum September 1999 is indicated in the text by .The UK participation in its preparation was entrusted by Technical Committee, MHE/4, Lifts, hoists and escalators.A list of organizations represented on

5、this committee can be obtained on request to its Secretary.EN 81-2:1998+A3:2009 is a “harmonized” European Standard and fully takes into account the requirements of the Lift Directive (95/16/EC). EN 81-2:1998+A3:2009 and EN 81-2:1998 will have a transition period of eighteen months in which they wil

6、l co-exist. It is intended that this period will allow manufacturers time to develop new products to meet the requirements contained in the A3 amendment. Based on this transition period, BS EN 81-2:1998 will be withdrawn in May, 2011. Following the implementation of the Lift Directive on 1 July 1999

7、, BS 5655-2:1988, together with BS 5655-12:1989, will apply only for modernization of existing lift installations. For all new installations this Standard will apply.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applica

8、tion. Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 81-2:1998+A3:2009This British Standard was published under the authority of the Standards Policy and Strategy Committee on 15 November 1998 BSI 2010Amendments/corrigenda issued since publicationAmd. No. Date

9、 Comments 10810 Corr. No. 1March 2000 Implemention of CEN corrigendum September 1999 15795 March 2006 Implementation of CEN amendments A1:2005 and A2:200431 March 2010 Implementation of CEN amendment A3:2009ISBN 978 0 580 64222 7EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 81-2:1998+A3 Decem

10、ber 2009 ICS 91.140.90 Supersedes EN 81-2:1998English Version Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts Rgles de scurit pour la construction et linstallation des ascenseurs - Partie 2: Ascenseurs hydrauliques Sicherheitsregeln fr die Konstruktion und den E

11、inbau von Aufzgen - Teil 2: Hydraulisch betriebene Personen- und Lastenaufzge This European Standard was approved by CEN on 21 February 1998 and includes Corrigendum 1 issued by CEN on 22 September 1999, Amendment 1 approved by CEN on 13 May 2005, Amendment 2 approved by CEN on 22 April 2004 and Ame

12、ndment 3 approved by CEN on 13 August 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning

13、such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own lang

14、uage and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L

15、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All

16、rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 81-2:1998+A3:2009: EEN 81-2:1998+A3:2009 (E) 2 Contents Page Foreword 5Introduction . 71 Scope 112 Normative references 123 Definitions 144 Units and symbols . 184.1 Units 184.2 Symbols 185 L

17、ift well 185.1 General provisions 185.2 Well enclosure . 185.3 Walls, floor and ceiling of the well . 225.4 Construction of the walls of lift wells and landing doors facing a car entrance 245.5 Protection of any spaces located below the car or the balancing weight . 255.6 Protection in the well . 25

18、5.7 Headroom and pit 255.8 Exclusive use of the lift well . 275.9 Lighting of the well 285.10 Emergency release 286 Machinery and pulley spaces . 286.2 Access 286.3 Machinery in machine room . 296.4 Machinery inside the well . 316.5 Machinery outside of the well 356.6 Devices for emergency and test

19、operations . 366.7 Construction and equipment of pulley spaces. 377 Landing doors 387.1 General provisions 387.2 Strength of doors and their frames . 397.3 Height and width of entrances . 407.4 Sills, guides, door suspension . 407.5 Protection in relation to door operation 417.6 Local lighting and c

20、ar here signal lights . 427.7 Locking and closed landing door check . 437.8 Closing of automatically operated doors 468 Car and balancing weight . 468.1 Height of car . 468.2 Available car area, rated load, number of passengers 468.3 Walls, floor and roof of the car . 498.4 Apron 508.5 Car entrance

21、. 508.6 Car doors 508.7 Protection during operation of doors 528.8 Reversal of closing movement . 538.9 Electrical device for proving the car doors closed 538.10 Sliding doors with multiple, mechanically linked panels 538.11 Opening the car door 54BS EN 81-2:1998+A3:2009EN 81-2:1998+A3:2009 (E) 3 8.

22、12 Emergency trap doors and emergency doors 548.13 Car roof . 558.14 Car header 568.15 Equipment on top of the car . 568.16 Ventilation 568.17 Lighting 568.18 Balancing weight . 579 %Suspension, precaution against free fall, descent with excessive speed and protection against unintended car movement

23、 controls ; priorities . 9614.1 Failure analysis and electric safety devices . 9614.2 Controls 10815 Notices, markings and operating instructions . 11215.1 General provisions 11215.2 Car . 11215.3 Car roof . 11315.4 #Machine and pulley spaces$ 11315.5 Well 11415.6 Overspeed governor 11415.7 Pit 1151

24、5.8 Buffers 11515.9 Landing identification . 11515.10 Electrical identification . 11515.11 Unlocking key for landing doors 11515.12 Alarm device 11515.13 Locking devices . 11515.14 Safety gear 11515.15 Emergency lowering valve 11615.16 Hand pump . 11615.17 Groups of lifts 11615.18 Tank . 11615.19 Ru

25、pture valve/one-way restrictor . 11616 Examinations - Tests - Register Maintenance . 11616.1 Examinations and tests . 11616.2 Register . 11716.3 Installer information 118Annex A (normative) List of the electric safety devices 119Annex B(normative) Unlocking triangle 121Annex C (informative) Technica

26、l dossier . 122Annex D (normative) Examinations and tests before putting into service 125Annex E (informative) Periodical examinations and tests, examinations and tests after an important modification or after an accident. 131Annex F (normative) Safety components - Tests procedures for verification

27、of conformity 133Annex G (Informative) Proof of guide rails 165Annex H (normative) Electronic components - Failure exclusion 198Annex J (normative) Pendulum shock tests . 206Annex K (normative) Calculations of rams, cylinders, rigid pipes and fittings . 212Annex L (informative) !Description of possi

28、ble measures“ 220Annex M (informative) #Machinery spaces - Access (6.1)$ . 226Annex ZA (informative) %Relationship between this European Standard and the Essential Requirements of EU Directive 95/16/EC amended by 2006/42/EC - incorporation of essential health and safety requirements from the relevan

29、t EU Directives ; - elimination of obvious errors ; - incorporation of proposals resulting from interpretation requests dealing with the improvement relative to the progress in technology ; - improvement of the references to other standards according to the progress in that field. After the CEN Enqu

30、iry on prEN81-2:1994 the EU Directive on Lifts (95/16/EC) was adopted. The requirements resulting from the essential health and safety requirements of this Directive being not taken into consideration in the draft have been summarised in the Addendum prA1:1996 to prEN81-2:1994 and submitted to the m

31、embers of CEN/TC 10 for approval. Having received the approval this Addendum has been incorporated into this standard taking into account the comments received from TC members. This standard does not correspond in all points to the present internal rules of CEN regarding the format of safety standar

32、ds. However, the format of this standard has been accepted by the interested parties and is therefore regarded as the better way of implementation of the essential health and safety requirements than a formalistic re-draft. This mainly because of the coming into force of the EU Directive 95/16/EC on

33、 97-07-01. BS EN 81-2:1998+A3:2009EN 81-2:1998+A3:2009 (E) 6 With the next revision of the standard, being already intended, this shortcomings will be removed. %Amendment 3 is needed on one hand because of the revision of the machinery directive, amendment of the lifts directive, and on the other ha

34、nd because of improvements in the state of the art. New ESRs in the revised machinery directive give new requirements for the fixation of protective guards. The amendment is addressing these new requirements. Furthermore the borderline between the scope of the machinery directive and the lifts direc

35、tive has changed. As a result of this the scope of EN 81-2 (and EN 81-1) is revised by means of this amendment. Additionally this amendment is giving more severe requirements for (1) measures against the risk of stumbling during loading and unloading, and for (2) measures against the risks due to un

36、controlled movements. These requirements are not linked to the revision of the machinery directive, but are a result of improved state of the art. By means of this amendment, an improved conformity to the relevant ESRs in the Lifts Directive and Machinery Directive is achieved. b) crushing ; c) fall

37、ing ; d) impact ; e) trapping ; f) fire ; g) electric shock ; h) failure of material due to : 1) mechanical damage ; 2) wear ; 3) corrosion. 0.1.2.2 Persons to be safeguarded : a) users ; b) maintenance and inspection personnel ; c) persons outside the lift well, the machine room and pulley room (if

38、 any). 1)Within CEN/TC 10 an interpretation committee has been established to answer questions about the spirit in which the experts have drafted the various clauses of this standard. The issued interpretations are available from National Standards Bodies. BS EN 81-2:1998+A3:2009EN 81-2:1998+A3:2009

39、 (E) 8 0.1.2.3 Objects to be safeguarded : a) loads in car ; b) components of the lift installation ; c) building in which the lift is installed. 0.2 Principles In drawing up this standard the following have been used. 0.2.1 This standard does not repeat all the general technical rules applicable to

40、 every electrical, mechanical, or building construction including the protection of building elements against fire. It has, however, seemed necessary to establish certain requirements of good construction, either because they are peculiar to lift manufacture or because in the case of lift utilizatio

41、n the requirements may be more stringent than elsewhere. 0.2.2 This standard does not only address the essential safety requirements of the Lift Directive, but additionally states minimum rules for the installation of lifts into buildings/constructions. There may be in some countries regulations for

42、 the construction of buildings etc. which cannot be ignored. Typical clauses affected by this are those defining minimum values for the height of the machine and pulley rooms and for their access doors dimensions. 0.2.3 When the weight, size and/or shape of components prevent them from being moved b

43、y hand, they are : a) either fitted with attachments for lifting gear, or b) designed so that they can be fitted with such attachments (e.g. by means of threaded holes), or c) shaped in such a way that standard lifting gear can easily be attached. 0.2.4 As far as possible the standard sets out only

44、the requirements that materials and equipment have to meet in the interests of safe operation of lifts. 0.2.5 Negotiations have been made between the customer and the supplier about : a) the intended use of the lift ; b) environmental conditions ; c) civil engineering problems ; d) other aspects rel

45、ated to the place of installation. ! 0.2.6 Risk analysis, terminology and technical solutions have been considered taking into account the methods of the EN 61508-series of standards. This led to a necessary classification of safety functions applied to PESSRAL.“ BS EN 81-2:1998+A3:2009EN 81-2:1998+

46、A3:2009 (E) 9 0.3 Assumptions Possible risks have been considered of each component that may be incorporated in a complete lift installation. Rules have been drawn up accordingly. 0.3.1 Components are : a) designed in accordance with usual engineering practice and calculation codes, taking into acco

47、unt all failure modes ; b) of sound mechanical and electrical construction ; c) made of materials with adequate strength and of suitable quality ; d) be free of defects. Harmful materials, such as asbestos are not used. 0.3.2 Components are kept in good repair and working order, so that the required

48、 dimensions remain fulfilled despite wear. 0.3.3 Components will be selected and installed so that foreseeable environmental influences and special working conditions do not affect the safe operation of the lift. 0.3.4 By design of the load bearing elements, a safe operation of the lift is assured for loads ranging from 0 % to 100 % of the rated load. 0.3.5 !The requirements of this European Standard regarding electrical safety devices are such that the possibility of a failure of an electric safety device (see 14.1.2.1.1