EN 688-2011 en Resilient floor coverings - Specification for corklinoleum《弹性地板覆盖物 corklinoleum规范》.pdf

《EN 688-2011 en Resilient floor coverings - Specification for corklinoleum《弹性地板覆盖物 corklinoleum规范》.pdf》由会员分享，可在线阅读，更多相关《EN 688-2011 en Resilient floor coverings - Specification for corklinoleum《弹性地板覆盖物 corklinoleum规范》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 688:2011Resilient floor coverings Specification for corklinoleumBS EN 688:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 688:201

2、1. It supersedes BS EN 688:1997, which is withdrawn.The UK participation in its preparation was entrusted to T e c h n i c a l C o m m i t t e e P R I / 6 0 , R e s i l i e n t f l o o r c o v e r i n g s .A list of organizations represented on this committee can be obtained on request to its secret

3、ary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 72228 8 ICS 97.150 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was publis

4、hed under the authority of the Standards Policy and Strategy Committee on 31 May 2011.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 688:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 688 April 2011 ICS 97.150 Supersedes EN 688:1997English Version Resilient floor cove

5、rings - Specification for corklinoleum Revtements de sol rsilients - Spcifications pour le linolum sur lige Elastische Bodenbelge - Spezifikation fr Korklinoleum This European Standard was approved by CEN on 10 March 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations whi

6、ch stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Eu

7、ropean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members

8、are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swe

9、den, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.

10、 Ref. No. EN 688:2011: EBS EN 688:2011EN 688:2011 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .54 Identification .55 Requirements .55.1 General requirements 55.2 Classification requirements 86 Marking .8Annex A (informative) Optional properties .9Bibliograp

11、hy . 10BS EN 688:2011EN 688:2011 (E) 3 Foreword This document (EN 688:2011) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either

12、by publication of an identical text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the latest by October 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or

13、CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 688:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgiu

14、m, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 688:2

15、011EN 688:2011 (E) 4 1 Scope This European Standard specifies the characteristics of corklinoleum, supplied in roll form. To encourage the consumer to make an informed choice, the standard includes a classification system based on intensity of use, which shows where resilient floor coverings should

16、give satisfactory service (see EN 685). It also includes requirements for marking. The term linoleum is frequently incorrectly applied to a range of floor coverings, often to those based on polyvinyl chloride or rubber. Such materials are excluded from this standard. 2 Normative references The follo

17、wing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 426, Resilient floor coverings Determination of width,

18、length, straightness and flatness of sheet material EN 428, Resilient floor coverings - Determination of overall thickness EN 429, Resilient floor coverings Determination of the thickness of layers EN 430, Resilient floor coverings Determination of mass per unit area EN 433, Resilient floor covering

19、s Determination of residual indentation after static loading EN 435, Resilient floor coverings Determination of flexibility EN 436, Resilient floor coverings Determination of density EN 670, Resilient floor coverings Identification of linoleum and determination of cement content and ash residue EN 6

20、85, Resilient, textile and laminate floor coverings Classification EN ISO 105-B02, Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:1994, including amendment 1:1998) EN ISO 717-2, Acoustics Rating of sound insulation in buildin

21、gs and of building elements Part 2: Impact sound insulation (ISO 717-2:1996) EN ISO 10140-3, Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation (ISO 10140-3:2010) BS EN 688:2011EN 688:2011 (E) 5 3 Terms and definitions For the pur

22、poses of this document, the following terms and definitions apply. 3.1 linoleum cement binder in linoleum, consisting of a mixture of linseed oil and/or other vegetable drying oils, rosin and drying oil catalysts, which is converted to a semi-elastic mass by an oxidative curing process 3.2 corklinol

23、eum product produced by calendering a homogeneous mixture of linoleum cement, granulated cork, pigments and inorganic filler onto a fibrous backing NOTE 1 The product is then converted into its final form by an oxidative curing process. NOTE 2 The only chemical cross-linking bondings in corklinoleum

24、 will be those which are formed during the oxidation process. Corklinoleum is a composition containing sufficient granulated cork, to give underfoot comfort and impact sound reduction. 4 Identification Corklinoleum shall be identified by its ability to be disintegrated in 0,5 mol/l potassium hydroxi

25、de/methanol solution. The maximum amount of inorganic filler (ash residue) shall be 25 % when tested in accordance with EN 670. Corklinoleum shall be distinguished from other types of linoleum by its density. 5 Requirements 5.1 General requirements All classes of corklinoleum shall comply with the g

26、eneral requirements, as appropriate, specified in Table 1, when tested in accordance with the methods given therein. BS EN 688:2011EN 688:2011 (E) 6 Table 1 General requirements Property Requirement Test method Rolls Length m width mm Not less than the nominal values EN 426 Overall thickness mm Aver

27、age Individual values Nominal value 0,15 Nominal value 0,20 EN 428 Thickness of fibrous backing mm Average 0,80 EN 429 Mass per unit area g/m2Average Nominal value 10 %. EN 430 Density kg/m3 850 EN 436 Residual indentation after static loading mm Average 3,2 mm nominal thickness 4,5 mm nominal thick

28、ness 6,0 mm nominal thickness 0,30 0,35 0,45 EN 433 Impact sound reduction dB 3,2 mm nominal thickness 4,5 mm nominal thickness 6,0 mm nominal thickness 12 14 16 Test in accordance with EN ISO 10140-3 and calculate and express the results in accordance with EN ISO 717-2. BS EN 688:2011EN 688:2011 (E

29、) 7 Table 1 (continued) Flexibility Thickness Mandrel (nominal) diameter 3,2 mm 30 mm 4,5 mm 40 mm 6,0 mm 50 mm Shall show no signs of cracking when bent around the appropriate mandrel EN 435 Method A Colour fastness to artificial light 5 minimum EN ISO 105-B02 Method 31)1)Before comparing the test

30、piece, expose the reference sample together with the Blue Wool cloth to the xenon arc lamp, until a contrast is produced on Blue Wool Reference 2 equal to the contrast illustrated by Grey Scale 3. This step is necessary to remove the inherent stove yellowing of linoleum before the stable colouration

31、 is achieved. BS EN 688:2011EN 688:2011 (E) 8 5.2 Classification requirements The classification scheme for resilient floor coverings is described in EN 685. The requirements for corklinoleum in accordance with this scheme, are related to the nominal overall thickness of the product, as shown in Tab

32、le 2. Table 2 Classification Class Symbol Level of use Nominal overall thickness 21 domestic moderate 3,2 22 domestic general 4,5)22+ domestic general 31 commercial moderate )Other thicknesses, e.g. 4,5 mm and 6,0 mm, can be specified to obtain more underfoot comfort and/or impact sound reduction 6

33、Marking Corklinoleum floor coverings and/or their packaging shall bear the following marking: a) number and date of this European Standard, i.e. EN 688:2011; b) manufacturers or suppliers identification; c) product name; d) colour/pattern, and batch and roll number; e) classes/symbols appropriate fo

34、r the product; f) length, width and thickness of rolls. BS EN 688:2011EN 688:2011 (E) 9 Annex A (informative) Optional properties Where the following properties are required for specific applications, the floor covering should be tested in accordance with the appropriate methods: electrical resistan

35、ce (see EN 1081); electrostatic propensity (see EN 1815); effect of stains (see EN 423). BS EN 688:2011EN 688:2011 (E) 10 Bibliography 1 EN 423, Resilient floor coverings Determination of resistance to staining 2 EN 1081, Resilient floor coverings Determination of the electrical resistance 3 EN 1815

36、, Resilient and textile floor coverings Assessment of static electrical propensity 4 EN 427, Resilient floor coverings Determination of the side length, squareness and straightness of tiles This page deliberately left blankBSI is the independent national body responsible for preparing British Standa

37、rdsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London

38、W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be gratefu

39、l if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating s

40、ervice called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition a

41、ll orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas

42、 British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also a

43、vailable whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits con

44、tact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI publications. BSI als

45、o holds the copyright,in the UK, of the publications of the international standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, rec

46、ording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email: