EN 4830-002-2015 en Aerospace series - Connectors optical rectangular modular operating temperature 125 for EN 4639-10X contacts - Part 002 Specification of performance《航空航天系列 EN46.pdf

《EN 4830-002-2015 en Aerospace series - Connectors optical rectangular modular operating temperature 125 for EN 4639-10X contacts - Part 002 Specification of performance《航空航天系列 EN46.pdf》由会员分享，可在线阅读，更多相关《EN 4830-002-2015 en Aerospace series - Connectors optical rectangular modular operating temperature 125 for EN 4639-10X contacts - Part 002 Specification of performance《航空航天系列 EN46.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 4830-002:2015Aerospace series Connectors, optical,r e c t a n g u l a r , m o d u l a r , o p e r a t i n gtemperature 125 C, for EN4639-10X contactsPart 002: Specification of performanceBS EN 4830-002:2015 BRITISH STANDARDNational forewordThis British Standard is the

2、UK implementation of EN 4830-002:2015.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not p

3、urport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 90480 6ICS 49.090Compliance with a British Standard cannot confer immunity fromlegal obligations

4、.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 4830-002:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4830-002 December 2015 ICS 49.0

5、90 English Version Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts - Part 002: Specification of performance Srie arospatiale - Connecteurs optiques rectangulaires, modulaires, temprature dutilisation 125 C, pour contacts EN 4639-10X

6、 - Partie 002: Spcification de performances Luft- und Raumfahrt - Optischer Rechtecksteckverbinder, modular, Betriebstemperatur 125 C, fr EN 4639-10X-Kontakte - Teil 002: Leistungsdaten This European Standard was approved by CEN on 22 August 2015. CEN members are bound to comply with the CEN/CENELEC

7、 Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or t

8、o any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the offici

9、al versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, N

10、orway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exp

11、loitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4830-002:2015 EBS EN 4830-002:2015EN 4830-002:2015 (E) 2 Contents Page European foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 5 4 Description and codification of models 5 5 Opera

12、ting conditions . 5 6 Contacts sub-assembly 6 7 Sealing plugs . 6 8 Extraction tool modules . 7 BS EN 4830-002:2015EN 4830-002:2015 (E) 3 European foreword This document (EN 4830-002:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). A

13、fter enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the s

14、tatus of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some of the elements of this document may be the subjec

15、t of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulg

16、aria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tu

17、rkey and the United Kingdom. BS EN 4830-002:2015EN 4830-002:2015 (E) 4 1 Scope This European Standard defines the material used in the manufacturing of EN 4830 optical modules. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are in

18、dispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4529-003, Aerospace series Elements of electrical and optical connection Sealing plugs Part 003: Class T

19、 Product standard EN 4639-101, Aerospace Series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 101: Optical contact for cable EN 4641-100 Operating temperatures between 65 C and 125 C Product standard EN 4639-102, Aerospace

20、 Series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 102: Optical contact for cable EN 4641-102 Operating temperatures between 55 C and 100 C Product standard EN 4639-103, Aerospace Series Connectors, optical, rectangular

21、, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 103: Optical contact for cable EN 4641-101 Operating temperatures between 55 C and 150 C Product standard 1)EN 4641-100, Aerospace series Cables, optical 125 m diameter cladding Part 100: Tight structure 62,5

22、/125 m core GI fibre 1,8 mm outside diameter Product standard EN 4641-101, Aerospace series Cables, optical 125 m diameter cladding Part 101: Tight structure 62,5 m core GI fibre 0,9 mm outside diameter Product standard EN 4641-102, Aerospace series Cables, optical, 125 m diameter cladding Part 102:

23、 Semi-loose 62,5/125 m GI fibre nominal 1,8 mm outside diameter Product standard EN 4830-001, Aerospace series Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts Part 001: Technical specification EN 4830-004, Aerospace series Connectors, optical, rectang

24、ular, modular, operating temperature 125 C, for EN 4639-10X contacts Part 004: Extraction tool Product standard IEC 61300-3-33, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-33: Examinations and measurements Ferrule withdrawal force 2)TR 4684

25、, Aerospace series Electrical and optical technology and component definitions 1)1) In preparation at the date of publication of this European Standard. 2) Published by: IEC International International Electrotechnical Commission. http:/www.iec.ch/ BS EN 4830-002:2015EN 4830-002:2015 (E) 5 3 Terms a

26、nd definitions For the purposes of this document, the terms and definitions given in TR 4684 apply. 4 Description and codification of models See Table 1. Table 1 Environmental class Description W Plug and receptacle with housing (shell) olive drab cadmium plated, aluminium alloy, 500 h resistance to

27、 salt mist, maximum operating temperature: 125 C continuous. F Plug and receptacle with housing (shell) black nickel plated, aluminium alloy, conductive finish, 96 h resistance to salt mist, maximum operating temperature: 125 C continuous. J Plug and receptacle with housing (shell) olive drab cadmiu

28、m plated, composite material, conductive finish, 500 h resistance to salt mist, maximum operating temperature: 125 C continuous. M Plug and receptacle with housing (shell) nickel plated composite material, conductive finish, 500 h resistance to salt mist, maximum operating temperature: 125 C continu

29、ous. 5 Operating conditions 5.1 Optical performances The optical performances are defined in the product standards in relationship with the used cable. 5.2 Permissible cables Permissible cables are given in Table 2. Table 2 Cable designation Fibre Outer diameter cable EN designation cable A 62,5 / 1

30、25 0,9 mm diameter EN 4641-101 B 62,5 / 125 1,8 mm (tight structure) EN 4641-100 C 62,5 / 125 1,8 mm (semi loose structure) EN 4641-102 BS EN 4830-002:2015EN 4830-002:2015 (E) 6 5.3 Material See Table 3. Table 3 Sleeve Description Material Male insert Body Thermoplastic 55 C to 125 C Sealing device

31、Silicone elastomer Guiding pin AISI 304L Female insert Sleeve Zirconia ceramic or similar Body Thermoplastic 55 C to 125 C Sealing device Silicone elastomer Centring pin AISI 304L 5.4 Sleeve force Under IEC 61300-3-33 test conditions, the sleeve force must be 1 N to 2,5 N. 5.5 Climatic conditions Te

32、mperature range: 55 C to 125 C. Fluid resistance: see EN 4830-001. Corrosion resistance: 500 h resistance to salt mist. 5.6 Mechanical conditions Mechanical endurance: 500 mated and unmated cycles. 6 Contacts sub-assembly Removable contacts which can be used with the various classes of connectors ar

33、e defined in the product standards. Product standard EN cable specification EN 4639-101 EN 4639-102 EN 4639-103 EN 4641-100 EN 4641-102 EN 4641-101 7 Sealing plugs Sealing plugs defined in EN 4529-003 N16 shall be used in the positions which correspond to unpopulated cavities. BS EN 4830-002:2015EN 4830-002:2015 (E) 7 8 Extraction tool modules See EN 4830-004. This page deliberately left blank