EN 474-8-2006 en Earth-moving machinery - Safety - Part 8 Requirements for graders (Incorporates Amendment A1 2009)《土方机械 安全 第8部分 压路机的要求 包含修改件A1-2009》.pdf

《EN 474-8-2006 en Earth-moving machinery - Safety - Part 8 Requirements for graders (Incorporates Amendment A1 2009)《土方机械 安全 第8部分 压路机的要求 包含修改件A1-2009》.pdf》由会员分享，可在线阅读，更多相关《EN 474-8-2006 en Earth-moving machinery - Safety - Part 8 Requirements for graders (Incorporates Amendment A1 2009)《土方机械 安全 第8部分 压路机的要求 包含修改件A1-2009》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 474-8:2006+A1:2009 Earth-moving machinery Safety Part 8: Requirements for gradersICS 53.100g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g

2、55g3g47g36g58BS EN 474-8:2006+A1:2009This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2007 BSI 2009ISBN 978 0 580 62372 1National forewordThis British Standard is the UK implementation of EN 474-8:2006+A1:2009. It supersedes BS EN

3、474-8:2006, which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee B/513, Construction equipment and plant and site safety, to Subcommittee B/513/1, Earth moving machinery (International).A list of organizations represented on request to its secretary.this su

4、bcommittee can be obtained on This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationDate

5、 CommentsThe start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .A1A1Implementation of CEN amendment A1:200931 May 2009E

6、UROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 474-8:2006+A1 February 2009 ICS 53.100 Supersedes EN 474-8:2006English Version Earth-moving machinery - Safety - Part 8: Requirements for graders Engins de terrassement - Scurit - Partie 8: Prescriptions applicables aux niveleuses Erdbaumaschinen -

7、 Sicherheit - Teil 8: Anforderungen fr Grader This European Standard was approved by CEN on 17 April 2006 and includes Amendment 1 approved by CEN on 20 December 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European St

8、andard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, Fre

9、nch, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus

10、, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMI

11、T EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 474-8:2006+A1:2009: EEN 474-8:2006+A1:2009 (E) 2 Contents Page Fore

12、word 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .54 List of additional significant hazards 65 Safety requirements and/or measures 65.1 General 65.2 Operators position 65.3 Fenders .65.4 Steering system .66 Information for use 7Annex A (normative) List of additional sign

13、ificant hazards Graders 8Annex B (informative) Illustrations 9Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 10Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Direct

14、ive 2006/42/EC“ 11Bibliography . 12Figures Figure B.1 Articulated steered grader . 9 Figure B.2 Wheel steered grader . 9 Figure B.3 Grader with snowblower 9 Tables Table A.1 List of additional significant hazards . 8 EN 474-8:2006+A1:2009 (E) 3 Foreword This document (EN 474-8:2006+A1:2009) has been

15、 prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by

16、 August 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2008-12-20. This document supersedes !EN 474-8:2006“. The start and finish of text introduced or altered by amendment is indicated in the text by

17、 tags ! “. !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ For bibliographic references, see !EN 474-1:2006+A1:2009“. EN 474 “Earth-moving machinery Safety“ comprises the following parts: Part 1: General requirements Part 2: Requ

18、irements for tractor-dozers Part 3: Requirements for loaders Part 4: Requirements for backhoe-loaders Part 5: Requirements for hydraulic excavators Part 6: Requirements for dumpers Part 7: Requirements for scrapers Part 8: Requirements for graders Part 9: Requirements for pipelayers Part 10: Require

19、ments for trenchers Part 11: Requirements for earth and landfill compactors Part 12: Requirements for cable excavators. This European Standard is intended for use in combination with Part 1 of the series. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the

20、following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,

21、 Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 474-8:2006+A1:2009 (E) 4 Introduction This part of EN 474 is a type C standard as stated in EN ISO 12100-1:2003. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scop

22、e of this European Standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the

23、provisions of this type C standard. EN 474-8:2006+A1:2009 (E) 5 1 Scope This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to graders as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably fores

24、eeable by the manufacturer (see Clause 4). This part also deals with graders equipped with attached snowplough. The requirements of this part are complementary to the common requirements formulated in !EN 474-1:2006+A1:2009“. This part does not repeat the requirements from !EN 474-1:2006+A1:2009“, b

25、ut adds or replaces the requirements for application for graders. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of graders. This European Standa

26、rd is not applicable to graders manufactured before the date of publication of this European Standard by CEN. NOTE When graders are intended for use in winter service, see EN 13021:2003 “Winter service machines Safety requirements” 2 Normative references The following referenced documents are indisp

27、ensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !EN 474-1:2006+A1:2009“, Earth-moving machinery Safety Part 1: General requirements !

28、EN ISO 7096:2008, Earth-moving machinery Laboratory evaluation of operator seat vibration (ISO 7096:2000)“ EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) 3 Terms and definitions For the purposes of this

29、 European Standard, the terms and definitions given in !EN 474-1:2006+A1:2009“, EN ISO 12100-1:2003 and the following apply. NOTE 1 Terminology for graders is specified in ISO 7134:1993 and illustrated in Annex B of this European Standard. NOTE 2 Definitions used in EN and ISO standards referred to

30、in this European Standard are also valid for this document. 3.1 grader self-propelled, wheeled machine which has an adjustable blade positioned between the front and rear axles NOTE 1 The grader can be equipped with a front-mounted blade or scarifier that can also be located between the axles. NOTE

31、2 The grader is primarily designed for grading, sloping, ditching and scarifying of materials through its forward motion. NOTE 3 The grader can be equipped with a rear-mounted ripper. EN 474-8:2006+A1:2009 (E) 6 4 List of additional significant hazards See Annex A. NOTE Annex A (normative) contains

32、all the significant hazards, hazardous situations and events, as far as they are dealt with in this European Standard, identified by risk assessment as significant for this type of machinery and which require action to eliminate or reduce the risk. 5 Safety requirements and/or measures 5.1 General G

33、raders shall comply with the requirements of !EN 474-1:2006+A1:2009“, as far as not modified or replaced by the requirements of this part. 5.2 Operators position 5.2.1 Operators seat !EN 474-1:2006+A1:2009“, 5.4.1 applies with the addition that the seat shall meet the requirements of !EN ISO 7096:20

34、08“, tested with the input spectral class of EM4. 5.2.2 Rear window(s) !EN 474-1:2006+A1:2009“, 5.3.2.7 and 5.3.2.9 apply also for rear window(s) with the following provisions: arrangement to defrost the rear window(s) shall be made; the rear window(s) shall be fitted with a motorised wiper(s) and w

35、asher. 5.3 Fenders !EN 474-1:2006+A1:2009“, 5.14.7 applies with the exception that front wheels do not require fenders. 5.4 Steering system 5.4.1 General !EN 474-1:2006+A1:2009“, 5.6.1 and 5.6.2 apply with the additions in 5.4.2 and 5.4.3. 5.4.2 Controls Wheel, articulated and bogie steering shall b

36、e actuated by separate controls. 5.4.3 Steering performance test !EN 474-1:2006+A1:2009“, 5.6.2 applies with the following additions: the steering performance test shall be conducted with the front steering system (Ackermann steering system) only; during testing, leaning front wheels and articulated

37、 or bogie steering systems shall be kept in the vertical and straight ahead positions respectively. EN 474-8:2006+A1:2009 (E) 7 5.4.4 Safety requirements for travelling mode For travelling on public roads or long distance travelling off road the following is required: the leaning front wheel system

38、shall be in the vertical position and the corresponding controls shall be mechanically locked; all blades and equipment shall be in their transport-position and so positioned that they are within the defined transport-width of the machine. 6 Information for use !EN 474-1:2006+A1:2009“, 7.2 applies w

39、ith addition of instruction on how to use the grader steering on public roads. EN 474-8:2006+A1:2009 (E) 8 Annex A (normative) List of additional significant hazards Graders The list of hazards in !EN 474-1:2006+A1:2009“, Annex A, applies with the following additions: Table A.1 List of additional si

40、gnificant hazards No.1)Hazard Relevant clauses of this European Standard Hazards, hazardous situations and hazardous events 1 Mechanical hazards due to: machine parts or working tools, e. g. mass and stability, mechanical strength. 5.4 Additional hazards, hazardous situations and hazardous events du

41、e to mobility 18 Relating to travelling functions 18.4 Travelling functions 5.4.2 19 Linked to operators station on the machine 19.4 Mechanical hazards at the operators station(s): a) contact with the wheels 5.3 19.5 Insufficient visibility from the operators station(s) 5.2.2 19.7 Inadequate seating

42、 5.2.1 20 Due to the control system 20.3 Inadequate design of manual controls and their mode of operation 5.4.3 24 Insufficient instructions for the operator (operation manual, signs, warnings and markings) 6 1) Number refers to Annex A of !EN 474-1:2006+A1:2009“. EN 474-8:2006+A1:2009 (E) 9 Annex B

43、 (informative) Illustrations Figure B.1 Articulated steered grader Figure B.2 Wheel steered grader Figure B.3 Grader with snowblower EN 474-8:2006+A1:2009 (E) 10 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European S

44、tandard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive Machinery 98/37/EC, amended by 98/79/EC. Once this standard is cited in the Official Jour

45、nal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential

46、Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. EN 474-8:2006+A1:2009 (E) 11 Annex ZB (informative) !Relationship between this European Standard and the E

47、ssential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery.

48、Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presum

49、ption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.“ EN 474-8:2006+A1:2009 (E) 12 Bibliography 1 ISO 7134:1993, Earth-moving machinery Graders Terminology and commercial specifications 2 ISO 10570:2004, Earth-moving machinery Articulated frame loc