EN 3475-405-2002 en Aerospace Series - Cables Electrical Aircraft Use - Test Methods - Part 405 Bending at Ambient Temperature《航空航天系列 飞机用电缆 测试方法 第405部分 环境温度下弯曲试验》.pdf

《EN 3475-405-2002 en Aerospace Series - Cables Electrical Aircraft Use - Test Methods - Part 405 Bending at Ambient Temperature《航空航天系列 飞机用电缆 测试方法 第405部分 环境温度下弯曲试验》.pdf》由会员分享，可在线阅读，更多相关《EN 3475-405-2002 en Aerospace Series - Cables Electrical Aircraft Use - Test Methods - Part 405 Bending at Ambient Temperature《航空航天系列 飞机用电缆 测试方法 第405部分 环境温度下弯曲试验》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、Cables, electrical, aircraft use Test methods Part 405: Bending at ambient temperature The European Standard EN 3475-405:2002 has the status of a British Standard ICs 49.060 BS EN 3475405:2002 Wk present to the responsible European committee any enquiries on the interpretation, or proposals for chan

2、ge, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-refer en ces The British Standards which implement internationa

3、l or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled ?International Standards Correspondence Index?, or by using the ?Find? facility ofthe BSI Standards Electronic Catalogue. A British Standard does not purport to include all

4、the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title

5、page, pages 2 and 3, and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. OBSI 04 February 2002 ISBN O 580 38363 6 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3475-405 January 2002 ICs 49.060 English version Aerospace series - Cabl

6、es, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature Srie arospatiale - Cbles lectriques usage aronautique - Mthodes dessai - Partie 405: Courbure la temprature ambiante Luft- und Raumfahrt - Elektrische Leitungen fr Luftfahrt, Verwendung - Prfverfahren - Teil 405:

7、Biegen bei Raumtemperatur This European Standard was approved by CEN on 6 August 2001 CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a

8、nd bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibil

9、ity of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Neth

10、erlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FR NORMUNG COMIT EUROPEN DE NORMALISATION Management Centre: rue de Stassart, 36 B-1050 Brussels O 2002 CEN All rights of exploitation in any form and by any means res

11、erved worldwide for CEN national Members. Ref. No. EN 34754052002 E EN 3475-405:2002 (E) Foreword This document (EN 3475-405:2002) has been prepared by the European Association of Aerospace Manufacturers (AECMA). After enquiries and votes carried out in accordance with the rules of this Association,

12、 this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at

13、 the latest by July 2002, and conflicting national standards shall be withdrawn at the latest by July 2002. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Czech Republ

14、ic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 2 EN 3475-405:2002 (E) 1 Scope This standard specifies a method of determining the behaviour of a cable after a bend test at am

15、bient tem perature. It shall be used together with EN 3475-100. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed here

16、after. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 3475-100 Aerospace series - Cabl

17、es, electrical, aircraft use - Test methods - Part 100: General EN 3475-302 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 302: Voltage proof test 3 Preparation of a specimen Take a specimen at least 750 mm in length from a finished cable. 4 Apparatus A horizontally suppor

18、ted mandrel shall be required for this test. The diameter of the mandrel and the load weight to be used shall be given in the technical specification. 5 Method 5.1 Procedure Fix one end of the specimen to the mandrel and load the other end. Turn the mandrel at between two and three turns per minute

19、until the total length of the specimen is wound around it. Move the mandrel in the opposite direction until the total length of the specimen is wound, the compressed part in the first operation becoming the stretched part in the second. The cycle shall be performed twice. 5.2 On completion, the spec

20、imen shall pass the voltage proof test defined in EN 3475-302. Req u i remen t 3 BS EN 3475-405:2002 B SI 389 Chiswick High Road London W4 4AL BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international lev

21、el. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be g

22、rateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual

23、 updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Ema

24、il: ordersmsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI p

25、rovides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. T

26、el: +44 (0)20 8996 71 11. Fax: +44 (0)20 8996 7048. Email: infosi-. Subscribing members ofBSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)2

27、0 8996 7002. Fax: +44 (0)20 8996 7001. Email: member shipmsi-global. com. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at ht tp :/www.bsi-. Copyright Copyright subsis

28、ts in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any

29、means - electronic, photocopying, recording or otherwise - without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, ofnecessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then the prior written permission ofBSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrighmsi-.