EN 2591-6414-2001 en Areospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 6414 Optical Elements - Unmating of Lanyard Release Optical Connection E.pdf

《EN 2591-6414-2001 en Areospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 6414 Optical Elements - Unmating of Lanyard Release Optical Connection E.pdf》由会员分享，可在线阅读，更多相关《EN 2591-6414-2001 en Areospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 6414 Optical Elements - Unmating of Lanyard Release Optical Connection E.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES Elements of electrical and optical connection Test methods Part 64 14: Optical elements - Unmating of lanyard release optical connection elements The European Standard EN 2591-6414:2001 has the status ofa British Standard ICs 49.035; 33.180.20 BS EN 25 9 1 -64 1 4 2

2、002 Wk present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be

3、 obtained on request to its secretary. Cr oss-r e fer enc e s The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using t

4、he “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity fro

5、m legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 4, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI 10 January 2002 ISBN O 580

6、38837 9 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2591-6414 December 2001 ICs 49.060 English version Aerospace series - Elements of electrical and optical connection - Test methods - Part 6414: Optical elements - Unmating of lanyard release optical connection elements Srie arospatiale - O

7、rganes de connexion lectrique et optique - Mthodes dessais - Partie 6414: Organes optiques -Aptitude au dsaccouplement des organes de connexion optiques largables Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prfverfahren - Teil 6414: Optische Elemente - Trennen von optischen

8、Verbindungselementen This European Standard was approved by CEN on 5 August 2001 CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bi

9、bliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility o

10、f a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Nor

11、way, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FR NORMUNG COMIT EUROPEN DE NORMALISATION Management Centre: rue de Stassart, 36 B-1050 Brussels O 2001 CEN All rights of exploitation in any form and by any means reserved worldw

12、ide for CEN national Members. Ref. No. EN 2591-6414:2001 E EN 2591-6414:2001 (E) Foreword This European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA) . After inquiries and votes carried out in accordance with the rules of this Association, this Standard ha

13、s received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by J

14、une 2002, and conflicting national standards shall be withdrawn at the latest by June 2002. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finl

15、and, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 2 EN 2591-6414:2001 (E) 1 Scope This standard specifies a method of assessing the locking of the lanyard release mechanism of optical connection elemen

16、ts. It shall be used together with EN 2591-100. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated

17、 references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 2591-100 EN 2591-408 EN 2591-414 EN 2591-601 EN

18、2591-6101 Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General 1) Aerospace series - Elements of electrical and optical connection - Test methods - Part 408: Mating and unmating forces Aerospace series - Elements of electrical and optical connection - T

19、est methods - Part 414: Unmating of lanyard release connectors Aerospace series - Elements of electrical and optical connection - Test methods - Part 601 : Optical elements - Insertion loss Aerospace series - Elements of electrical and optical connection - Test methods - Part 61 O1 : Optical element

20、s -Visual examination 3 Preparation of specimens 3.1 the product standard. Specimens shall be fitted with normal accessories, mounted and terminated in accordance with 3.2 See EN 2591-414 (if applicable) plus: Unless indicated in the technical specification, the following details shall be specified:

21、 - maximum value of insertion loss; - type and length of cable/fibre. 4 Apparatus See EN 2591-414 and EN 2591-601. 1) Published as AECMA Prestandard at the date of publication of the present standard 3 EN 2591-6414:2001 (E) 5 Method 5.1 initiai measurements (if applicable) EN 2591-414 PIUS EN 2591-6

22、01 5.2 Procedure EN 2591-414 5.3 Final measurements and requirements EN 2591-6101 EN 2591-408 EN 2591-601 4 BS EN 2591 -64 14: 2002 BSI 389 Chiswick High Road Lon don w4 4AL BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Euro

23、pe and at the international level. It is incorporated by Royal Charter. Re vi si ons British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our pr

24、oducts and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400

25、. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9

26、001. Fax: +44 (0)20 8996 7001. Email: orders&-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested

27、. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. C

28、ontact the Information Centre. Tel: +44 (0)20 8996 71 11. Fax: +44 (0)20 8996 7048. Email: infomi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details ofthese and other benefits contact Membersh

29、ip Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 700 1. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyrig

30、ht Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, ofthe publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in a

31、ny form or by any means - electronic, photocopying, recording or otherwise -without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, ofnecessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then the prior written permission ofBSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyright&-.