EN 2033-2017 en Aerospace series - Strips cold rolled in steel Thickness 0 1 mm a 2 5 mm - Dimensions《航空航天系列-钢 冷轧 钢带-厚度为0 1毫米 = a = 2 5毫米-尺寸》.pdf

《EN 2033-2017 en Aerospace series - Strips cold rolled in steel Thickness 0 1 mm a 2 5 mm - Dimensions《航空航天系列-钢 冷轧 钢带-厚度为0 1毫米 = a = 2 5毫米-尺寸》.pdf》由会员分享，可在线阅读，更多相关《EN 2033-2017 en Aerospace series - Strips cold rolled in steel Thickness 0 1 mm a 2 5 mm - Dimensions《航空航天系列-钢 冷轧 钢带-厚度为0 1毫米 = a = 2 5毫米-尺寸》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 2033:2017Aerospace series Strips, coldrolled in steel, Thickness 0,1 mm a 2,5 mm DimensionsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 2033:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 2033:2017.The UK par

2、ticipation in its preparation was entrusted to TechnicalCommittee ACE/61, Metallic materials for aerospace purposes.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract.

3、 Users are responsible for its correctapplication. The British Standards Institution 2017. Published by BSI StandardsLimited 2017ISBN 978 0 580 95331 6ICS 49.025.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority

4、of theStandards Policy and Strategy Committee on 31 March 2017.Amendments issued since publicationDate Text affectedBS EN 2033:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2033 March 2017 ICS 49.025.10 English Version Aerospace series - Strips, cold rolled in steel, Thickness 0,1 mm a 2,

5、5 mm - Dimensions Srie arospatiale - Bandes, lamines froid en acier, paisseurs 0,1 mm a 2,5 mm - Dimensions Luft- und Raumfahrt - Bnder, kaltgewalzt aus Stah,l Dicken 0,1 mm a 2,5 mm - Mae This European Standard was approved by CEN on 21 November 2016. CEN members are bound to comply with the CEN/CE

6、NELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre

7、 or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the o

8、fficial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlan

9、ds, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All

10、 rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2033:2017 EBS EN 2033:2017EN 2033:2017 (E) 2 Contents Page European foreword 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Form . 5 4 Recommended dimensions and mass 6 5 Dimensional

11、tolerances. 7 5.1 Thickness 7 5.2 Width 7 BS EN 2033:2017EN 2033:2017 (E) 3 European foreword This document (EN 2033:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules

12、of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or

13、 by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsi

14、ble for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland,

15、 Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 2033:2017EN 2033:2017

16、(E) 4 Introduction This European Standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. BS EN 2033:2017EN 2033:2017 (E) 5 1 Scope This European Standard specifies the dimensions and tolerances of:

17、Strips, cold rolled in steel Thickness 0,1 mm a 2,5 mm for aerospace applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For und

18、ated references, the latest edition of the referenced document (including any amendments) applies. EN 4258, Aerospace series Metallic materials General organization of standardization Links between types of EN standards and their use 3 Form See Figure 1. Figure 1 Form BS EN 2033:2017EN 2033:2017 (E)

19、 6 4 Recommended dimensions and mass See Table 1. Table 1 Nominal a Mass per unit areaamm kg/m20,1 0,8 0,2 1,6 0,3 2,4 0,4 3,1 0,5 3,9 0,6 4,7 0,7 5,5 0,8 6,3 0,9 7,1 1,0 7,9 1,2 9,4 1,4 11,0 1,6 12,6 1,8 14,1 2,0 15,7 2,5 19,6 aFor information, calculated with a density of 7,85 kg/dm3. BS EN 2033:2

20、017EN 2033:2017 (E) 7 5 Dimensional tolerances 5.1 Thickness See Table 2. Measurements shall be taken on the centre line. Table 2 Dimensions in millimetres Thickness Tolerances for width: b 125 125 b 250 250 b 600 a = 0,1 0,01 - - 0,1 a 0,3 0,02 - - 0,3 a 0,4 0,03 0,03 0,03 0,4 a 0,5 0,03 0,03 0,04

21、0,5 a 0,6 0,03 0,04 0,04 0,6 a 0,8 0,04 0,05 0,05 0,8 a 1,0 0,14 0,05 0,06 1,0 a 1,4 - 0,06 0,07 1,4 a 2,0 - 0,07 0,08 2,0 a 2,5 - 0,08 0,09 5.2 Width See Table 3. Table 3 Dimensions in millimetres Width Tolerances for thickness: 0,1 a 0,3 0,3 a 1,0 1,0 a 1,6 1,6 a 2,5 b 125 +0,4 0 +0,4 0 - - 125 b

22、250 - +0,6 0 +0,7 0 +0,8 0 250 b 400 - +0,8 0 +0,9 0 +1,0 0 400 b 600 - +1,0 0 +1,2 0 +1,4 0 This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI i

23、s incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise

24、into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsW

25、e can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British an

26、d adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll

27、 the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publicatio

28、n and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consen

29、t.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user on

30、ly and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced i

31、n any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to

32、 reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant acce

33、ss to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in singl

34、e copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and

35、the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For fu

36、rther information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication pl

37、ease inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20