EN 203-2-1-2014 en Gas heated catering equipment - Part 2-1 Specific requirements - Open burners and wok burners《燃气加热的餐饮设备 第2部分 1 特殊要求 一般安全规则 打开燃烧器和工作燃烧器》.pdf

《EN 203-2-1-2014 en Gas heated catering equipment - Part 2-1 Specific requirements - Open burners and wok burners《燃气加热的餐饮设备 第2部分 1 特殊要求 一般安全规则 打开燃烧器和工作燃烧器》.pdf》由会员分享，可在线阅读，更多相关《EN 203-2-1-2014 en Gas heated catering equipment - Part 2-1 Specific requirements - Open burners and wok burners《燃气加热的餐饮设备 第2部分 1 特殊要求 一般安全规则 打开燃烧器和工作燃烧器》.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 203-2-1:2014Gas heated catering equipmentPart 2-1: Specific requirements Openburners and wok burnersBS EN 203-2-1:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 203-2-1:2014. Itsupersedes BS EN 203-2-1:2005 which is withdrawn

2、.The UK participation in its preparation was entrusted to TechnicalCommittee GSE/19, Catering equipment (gas).A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users

3、 are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 82212 4ICS 97.040.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the

4、Standards Policy and Strategy Committee on 31 January 2015.Amendments issued since publicationDate Text affectedBS EN 203-2-1:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 203-2-1 December 2014 ICS 97.040.20 Supersedes EN 203-2-1:2005English Version Gas heated catering equipment - Part 2-

5、1: Specific requirements - Open burners and wok burners Appareils de cuisson professionnelle utilisant les combustibles gazeux - Partie 2-1: Exigences particulires - Brleurs dcouverts et woks Grokchengerte fr gasfrmige Brennstoffe - Teil 2-1: Spezifische Anforderungen - Offene Brenner und Wok-Brenne

6、r This European Standard was approved by CEN on 8 November 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical r

7、eferences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a

8、 CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Maced

9、onia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EURO

10、PISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 203-2-1:2014 EBS EN 203-2-1:2014EN 203-2-1:2014 (E) 2 Contents Page Foreword 5 1 Scope

11、 6 2 Normative references 6 3 Terms and definitions .6 4 Classification 6 5 Constructional requirements 6 5.1 General 6 5.1.1 Conversion to different gases 6 5.1.2 Materials and methods of construction 7 5.1.3 Use, cleaning and maintenance .7 5.1.4 Gas connections 7 5.1.5 Soundness 7 5.1.6 Supply of

12、 combustion air and evacuation of combustion products 7 5.1.7 Flame visibility .7 5.1.8 Electrical safety7 5.1.9 Construction requirements for gas cylinder compartment .8 5.2 Particular requirements for components in the gas circuit 8 5.2.1 General 8 5.2.2 Gas rate control and shut-off device .8 5.2

13、.3 Auxiliary equipment 8 5.2.4 Burners .8 5.2.5 Gas rate adjusters9 5.3 Particular requirements 9 5.3.1 Food spillage 9 5.3.2 Stability and mechanical safety .9 6 Performance requirements .9 6.1 Soundness 9 6.1.1 Soundness of the gas circuit 9 6.1.2 Soundness of combustion product circuit of type B

14、appliances .9 6.2 Obtaining the gas rate .9 6.2.1 Nominal heat input (Qn) .9 6.2.2 Full calorific rate 9 6.2.3 Reduced heat input9 6.2.4 Ignition burner heat input .9 6.3 Safety of operation . 10 6.3.1 Burners 10 6.3.2 Temperature limits 10 6.3.3 Ignition cross-lighting - flame stability 10 6.3.4 Co

15、mbustion products safety devices for type B11BSappliances . 10 6.3.5 Pre-purge . 11 6.4 Influence of burners on each other. 11 6.5 Auxiliary equipment . 11 6.5.1 Flame shut off device . 11 6.5.2 Ignition device . 11 6.6 Air proving device. 11 6.6.1 General . 11 6.6.2 Supervision of the combustion ai

16、r or combustion products rate . 11 6.6.3 Supervision of the combustion air pressure or combustion products pressure 12 6.6.4 Air/gas ratio controls 12 6.7 Combustion . 12 6.7.1 All appliances (in calm air) 12 6.7.2 Special conditions 12 BS EN 203-2-1:2014EN 203-2-1:2014 (E) 3 6.7.101 Abnormal use re

17、asonably foreseeable 12 6.8 Particular requirements 12 6.8.1 Stability and mechanical safety . 12 6.8.2 Pressurized parts . 12 6.8.3 Lack of heat-bearing fluid . 12 6.9 Auxiliary energy . 12 6.9.1 General 12 6.9.2 Electrical energy fluctuation 12 6.9.3 Other auxiliary energy . 12 6.10 Rational use o

18、f energy 12 6.10.101 Open burners 13 6.11 Operating requirements - Temperature of the LPG cylinder and its compartment 13 6.11.1 Temperature of the walls of the compartment . 13 6.11.2 Temperature of the LPG cylinder . 13 7 Test conditions 13 7.1 General 13 7.1.1 Characteristics of the test gases .

19、13 7.1.2 Requirements for making up test gases . 13 7.1.3 Test room . 13 7.1.4 Preparation of the appliance 13 7.1.5 Practical method of test 13 7.1.6 Test pressures . 13 7.1.7 Carrying out the tests 13 7.2 Soundness . 14 7.2.1 Soundness of the gas circuit . 14 7.2.2 Soundness of the combustion circ

20、uit and correct evacuation of the combustion products for type B appliances 14 7.3 Obtaining gas rates . 14 7.3.1 General 14 7.3.2 Nominal heat input 14 7.3.3 Full rate . 14 7.3.4 Reduced rate 15 7.4 Operational safety . 15 7.4.1 Burners . 15 7.4.2 Limit temperatures 15 7.4.3 Ignition - cross- light

21、ing - flame stability 15 7.5 Auxiliary equipment 17 7.5.1 Flame shut off device 17 7.5.2 Ignition device 17 7.6 Combustion 17 7.6.1 General 17 7.6.2 Tests carried out under normal conditions 17 7.6.3 Specific test for type B appliances 21 7.6.4 Test with sooting limit gas 21 7.7 Air-proving device .

22、 21 7.7.1 General 21 7.7.2 Supervision of the combustion air or the combustion products rate 21 7.7.3 Supervision of the combustion air or the combustion products pressure . 22 7.8 Special tests . 22 7.8.1 Stability and mechanical safety . 22 7.8.2 Pressurized parts . 22 7.8.3 Lack of heat bearing f

23、luid . 22 7.8.101 Spillage 22 7.9 Test method - Overheating of the LPG cylinder and its compartment 22 7.101 Rational use of energy 22 7.101.1 General 22 7.101.2 Test. 23 8 Designation 24 9 Marking and instructions 24 BS EN 203-2-1:2014EN 203-2-1:2014 (E) 4 9.1 General . 24 9.2 Marking on the applia

24、nce . 24 9.2.1 Data plates and labels 24 9.2.2 Other marking on the appliance 24 9.3 Instructions . 24 9.3.1 General . 24 9.3.2 Instructions for use and maintenance 24 9.3.3 Instructions for installation and adjustment 24 9.3.4 Instructions for conversion to different gases 24 9.4 Packaging 24 Annex

25、 A (informative) National situations . 27 Annex B (normative) Use of symbols on appliances and packaging . 28 Annex C (informative) Trilingual list of appliances in the scope of EN 203-1 and corresponding Part 229 Annex D (normative) Non pneumatic air/gas control devices . 30 Annex E (informative) C

26、omposition of the gas circuit 31 Annex ZA (informative) Clauses of this European Standard EN 203-2-1 addressing essential requirements or other provisions of EU Directives. . 32 BS EN 203-2-1:2014EN 203-2-1:2014 (E) 5 Foreword This document (EN 203-2-1:2014) has been prepared by Technical Committee

27、CEN/TC 106 “Large kitchen appliances using gaseous fuels”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2015 and conflicting national standards s

28、hall be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 203-2-1:2005

29、. The technical changes in comparison to the previous edition are: modification of the definition of wok burner in 3.3.2.103; modification of the text in 7.1.5.3 Conditions of supply and adjustment of the appliances; addition of a general subclause on 7.4.2 Limit temperatures; addition of a pan of 6

30、0 cm internal diameter in tables 101, 102 and 103; modification in 7.6.2.5 (7.6.2.103) of the adjustment of the sequential function control; modification of the test in 7.6.2.6 “abnormal use reasonably forseeable” (nominal heat output replaced by minimum heat input). This European Standard specifies

31、 the safety and rational use of energy requirements for open and wok burners. This European Standard has to be used in conjunction with EN 203-1 “Gas Heated Catering Equipment Part 1: General safety rules”. This sub-part of part 2 supplements or modifies the corresponding clauses of EN 203-1, so as

32、to convert it into the European Standard for Commercial Gas Heated Open and Non- Enclosed Burners. Enclosed and solid tops are covered by EN 203-2-9. Subclauses and Figures which are additional to those in EN 203-1 are numbered starting with 101. This document has been prepared under a mandate given

33、 to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the nati

34、onal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lit

35、huania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 203-2-1:2014EN 203-2-1:2014 (E) 6 1 Scope Scope is applicable with the following addition: This European Standard specifies requirements for

36、 the construction and operating characteristics relating to the safety, rational use of energy and marking, of atmospheric commercial gas heated open burners, non-enclosed covered burners. It also states test methods to check those characteristics. 2 Normative references Normative references are app

37、licable with the following addition: EN 203-1:2014, Gas heated catering equipment - Part 1: General safety rules EN 631-1, Materials and articles in contact with foodstuffs - Catering containers - Part 1: Dimensions of containers 3 Terms and definitions Terms and definitions are applicable with the

38、following addition: 3.3.2.101 open burner hot plate burner for which the pan is heated directly by the flame and the products of combustion are evacuated directly to atmosphere without following a specific way 3.3.2.102 non enclosed covered burner burner for which the pan or the foodstuffs being hea

39、ted is screened from direct flame contact by the interposition of a surface on which they rest and where all products of combustion are evacuated directly to the atmosphere (e.g. around the periphery of the plate) and the burner is designed so that partial visibility of the flame is possible in norm

40、al operation EXAMPLE A non-enclosed burner may be: permanent, i.e. designed to be used only with the plate in position; dual purpose, i.e. designed so that it may also be used as an open burner after removal of the removable plate. 3.3.2.103 wok burner open burner for which the environment and in pa

41、rticular the supports to accept a large bowl-shaped cooking pan which dimensions are stated in the operating instructions 3.3.101 working surface surface on which the pans rest or the food is handled as well as the top horizontal surface of the appliance 4 Classification Shall be according to EN 203

42、-1:2014, 4. 5 Constructional requirements 5.1 General 5.1.1 Conversion to different gases Shall be according to EN 203-1:2014, 5.1.1. BS EN 203-2-1:2014EN 203-2-1:2014 (E) 7 5.1.2 Materials and methods of construction Shall be according to EN 203-1:2014, 5.1.2. 5.1.3 Use, cleaning and maintenance Sh

43、all be according to EN 203-1:2014, 5.1.3. 5.1.4 Gas connections Shall be according to EN 203-1:2014, 5.1.4. 5.1.5 Soundness Shall be according to EN 203-1:2014, 5.1.5. 5.1.6 Supply of combustion air and evacuation of combustion products 5.1.6.1 General EN 203-1:2014, 5.1.6.1 is replaced by the follo

44、wing modification: Appliances shall be constructed so that, under normal conditions of use and maintenance, the supply of combustion air and the evacuation of combustion products is permanently guaranteed. Obstruction of the combustion air inlets and the evacuation of the products of combustion shal

45、l be made impossible (from the pans used). 5.1.6.2 Appliances equipped with a fan Shall be according to EN 203-1:2014, 5.1.6.2. 5.1.6.3 Appliances fitted with an air/gas ratio control device Shall be according to EN 203-1:2014, 5.1.6.3. 5.1.6.4 Appliances not intended to be connected to an evacuatio

46、n duct of the combustion products (Type A) Shall be according to EN 203-1:2014, 5.1.6.4. 5.1.6.5 Appliances intended to be connected to a an evacuation duct of the combustion products (Type B) Shall be according to EN 203-1:2014, 5.1.6.5. 5.1.7 Flame visibility 5.1.7.1 Verification by the installer

47、Shall be according to EN 203-1:2014, 5.1.7.1. 5.1.7.2 Confirmation by the user Shall be according to EN 203-1:2014, 5.1.7.2. 5.1.8 Electrical safety Shall be according to EN 203-1:2014, 5.1.8. BS EN 203-2-1:2014EN 203-2-1:2014 (E) 8 5.1.9 Construction requirements for gas cylinder compartment Shall

48、be according to EN 203-1:2014, 5.1.9. 5.2 Particular requirements for components in the gas circuit 5.2.1 General Shall be according to EN 203-1:2014, 5.2.1. 5.2.2 Gas rate control and shut-off device 5.2.2.1 General Shall be according to EN 203-1:2014, 5.2.2.1. 5.2.2.2 Shut-off device Shall be acco

49、rding to EN 203-1:2014, 5.2.2.2. 5.2.2.3 Control knob Shall be according to EN 203-1:2014, 5.2.2.3. 5.2.2.4 Control signals and marking Shall be according to EN 203-1:2014, 5.2.2.4. 5.2.3 Auxiliary equipment Shall be according to EN 203-1:2014, 5.2.3. 5.2.3.1 General Shall be according to EN 203-1:2014, 5.2.3.1. 5.2.3.2 Ignition device Shall be according to EN 203-1:2014, 5.2.3.2. 5.2.3.3 Flame supervision device Shall be according to EN 203-1:2014, 5.2.3.3. 5.2.3.4 Gas regulator Shall be according to EN 203-1:2014, 5.2.3.4. 5.2.3.5 Regulating and over