EN 1729-2-2012 en Furniture - Chairs and tables for educational institutions - Part 2 Safety requirements and test methods (Incorporates Amendment A1 2015)《家具 桌椅教育机构 第2部分 安全要求和测试方法.pdf

《EN 1729-2-2012 en Furniture - Chairs and tables for educational institutions - Part 2 Safety requirements and test methods (Incorporates Amendment A1 2015)《家具 桌椅教育机构 第2部分 安全要求和测试方法.pdf》由会员分享，可在线阅读，更多相关《EN 1729-2-2012 en Furniture - Chairs and tables for educational institutions - Part 2 Safety requirements and test methods (Incorporates Amendment A1 2015)《家具 桌椅教育机构 第2部分 安全要求和测试方法.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 1729-2:2012Furniture Chairs and tablesfor educational institutionsPart 2: Safety requirements and testmethodsBS EN 1729-2:20 2+A1: 5BS EN 1729-2:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1729-2:2012+A1:2015. It s

2、upersedes BS EN 1729-2:2012 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK participat

3、ion in its preparation was entrusted by Technical Committee FW/0, Furniture, to Subcommittee FW/0/4, Educational Furniture.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of

4、 a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 86970 9ICS 97.140Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under th

5、e authority of the Standards Policy and Strategy Committee on 29 February 2012.Amendments/corrigenda issued since publicationDate Text affected31 January 2016 Implementation of CEN amendment A1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1729-2:2012+A1 December 2015 ICS 97.140 Supersede

6、s EN 1729-2:2012English Version Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods Meubles - Chaises et tables pour les tablissements denseignement - Partie 2: Exigences de scurit et mthodes dessai Mbel - Sthle und Tische fr Bildungseinrichtunge

7、n - Teil 2: Sicherheitstechnische Anforderungen und Prfverfahren This European Standard was approved by CEN on 9 December 2011 and includes Amendment 1 approved by CEN on 17 November 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for gi

8、ving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three of

9、ficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies

10、of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain

11、, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide f

12、or CEN national Members. Ref. No. EN 1729-2:2012+A1:2015 EEN 1729-2:2012+A1:2015 (E) 2 Contents Page European foreword . 4 1 Scope 5 2 Normative references 5 3 General test conditions . 5 3.1 Testing ranges of chairs and tables 5 3.2 Testing of height adjustable and multi-size chairs and tables 5 3.

13、3 Sequence of testing . 6 4 Safety requirements . 6 5 Testing of chairs 7 5.1 General 7 5.2 Stability . 8 5.2.1 General 8 5.2.2 Forward stability . 8 5.2.3 Sideways stability . 9 5.2.4 Rearwards stability . 11 5.2.5 Chairs with backrest inclination . 11 5.3 Strength and durability 12 5.3.1 General .

14、 12 5.3.2 Seat and back static load (!EN 1728:2012, 6.4“) . 12 5.3.3 Seat and back durability (!EN 1728:2012, 6.17“) . 13 5.3.4 Seat front edge durability (!EN 1728:2012, 6.18“) . 13 5.3.5 Sideways static load (!EN 1728:2012, 6.16“) 14 5.3.6 Forward static load (!EN 1728:2012, 6.15“) . 14 5.3.7 Seat

15、 impact (!EN 1728:2012, 6.24“) . 15 5.3.8 Back impact (!EN 1728:2012, 6.25“) . 16 5.3.9 Static load of foot rail (!EN 1728:2012, 6.8“) 17 5.3.10 Drop test (!EN 1728:2012, 6.27.3“) 17 5.3.11 Foot !rest“ durability (!EN 1728:2012, 6.21“) 18 5.3.12 Armrest vertical static load (!EN 1728:2012, 6.11 or E

16、N 1335-3:2009, 7.2.3“) . 18 6 Testing of tables 19 6.1 Stability 19 6.1.1 General . 19 6.1.2 Stability of tables, vertical load (!EN 1730:2012, 7.2“) . 19 6.2 Strength and durability of tables 19 6.2.1 General . 19 6.2.2 Horizontal static load (!EN 1730:2012, 6.2“) . 20 6.2.3 Horizontal durability (

17、!EN 1730:2012, 6.4.2“) 20 6.2.4 Vertical static load (!EN 1730:2012, 6.3“) . 21 6.2.5 Vertical durability (!EN 1730:2012, 6.5“) 22 7 Test report 22 Annex A (informative) Test method for determination of the displacement of chairs placed on tabletops 24 BS EN 1729-2:2012+A1:2015EN 1729-2:2012+A1:2015

18、 (E)EN 1729-2:2012+A1:2015 (E) 2 Contents Page European foreword . 4 1 Scope 5 2 Normative references 5 3 General test conditions . 5 3.1 Testing ranges of chairs and tables 5 3.2 Testing of height adjustable and multi-size chairs and tables 5 3.3 Sequence of testing . 6 4 Safety requirements . 6 5

19、Testing of chairs 7 5.1 General 7 5.2 Stability . 8 5.2.1 General 8 5.2.2 Forward stability . 8 5.2.3 Sideways stability . 9 5.2.4 Rearwards stability . 11 5.2.5 Chairs with backrest inclination . 11 5.3 Strength and durability 12 5.3.1 General . 12 5.3.2 Seat and back static load (!EN 1728:2012, 6.

20、4“) . 12 5.3.3 Seat and back durability (!EN 1728:2012, 6.17“) . 13 5.3.4 Seat front edge durability (!EN 1728:2012, 6.18“) . 13 5.3.5 Sideways static load (!EN 1728:2012, 6.16“) 14 5.3.6 Forward static load (!EN 1728:2012, 6.15“) . 14 5.3.7 Seat impact (!EN 1728:2012, 6.24“) . 15 5.3.8 Back impact

21、(!EN 1728:2012, 6.25“) . 16 5.3.9 Static load of foot rail (!EN 1728:2012, 6.8“) 17 5.3.10 Drop test (!EN 1728:2012, 6.27.3“) 17 5.3.11 Foot !rest“ durability (!EN 1728:2012, 6.21“) 18 5.3.12 Armrest vertical static load (!EN 1728:2012, 6.11 or EN 1335-3:2009, 7.2.3“) . 18 6 Testing of tables 19 6.1

22、 Stability 19 6.1.1 General . 19 6.1.2 Stability of tables, vertical load (!EN 1730:2012, 7.2“) . 19 6.2 Strength and durability of tables 19 6.2.1 General . 19 6.2.2 Horizontal static load (!EN 1730:2012, 6.2“) . 20 6.2.3 Horizontal durability (!EN 1730:2012, 6.4.2“) 20 6.2.4 Vertical static load (

23、!EN 1730:2012, 6.3“) . 21 6.2.5 Vertical durability (!EN 1730:2012, 6.5“) 22 7 Test report 22 Annex A (informative) Test method for determination of the displacement of chairs placed on tabletops 24 EN 1729-2:2012+A1:2015 (E) 3 A.1 General . 24 A.2 Test equipment 24 A.3 Test method 24 BS EN 1729-2:2

24、012+A1:2015EN 1729-2:2012+A1:2015 (E)EN 1729-2:2012+A1:2015 (E) 4 European foreword This document (EN 1729-2:2012+A1:2015) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard

25、, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/

26、or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1 approved by CEN on 2015-11-17. This document supersedes !EN 1729-2:2012“. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. EN

27、 1729 consists of the following parts under the general title “Furniture Chairs and tables for educational institutions“: Part 1: Functional dimensions; Part 2: Safety requirements and test methods. The main changes with respect to the previous edition are listed below: a) additional consideration o

28、f swivel chairs; b) additional consideration of chairs with arm rests; c) clarification of seat loading points and back loading points; d) amendment of some loads and forces; e) modification of !Annex A“ (informative) “Test method for determination of stability of chairs placed on tabletops“. Accord

29、ing to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,

30、Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1729-2:2012+A1:2015EN 1729-2:2012+A1:2015 (E)EN 1729-2:2012+A1:2015 (E) 4 European fore

31、word This document (EN 1729-2:2012+A1:2015) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest b

32、y June 2016, and conflicting national standards shall be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent

33、 rights. This document includes Amendment 1 approved by CEN on 2015-11-17. This document supersedes !EN 1729-2:2012“. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. EN 1729 consists of the following parts under the general title “Furniture Chairs

34、 and tables for educational institutions“: Part 1: Functional dimensions; Part 2: Safety requirements and test methods. The main changes with respect to the previous edition are listed below: a) additional consideration of swivel chairs; b) additional consideration of chairs with arm rests; c) clari

35、fication of seat loading points and back loading points; d) amendment of some loads and forces; e) modification of !Annex A“ (informative) “Test method for determination of stability of chairs placed on tabletops“. According to the CEN/CENELEC Internal Regulations, the national standards organizatio

36、ns of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

37、 Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 1729-2:2012+A1:2015 (E) 5 1 Scope This European Standard specifies safety requirements and test methods for chairs and tables for general educational purposes in educati

38、onal institutions. It applies to furniture for use with laptop computers or portable devices, but not to special purpose workstations, e.g. laboratories, ranked seating and workshops. !deleted text“ !The“ figures illustrate test principles only and cannot be used to carry out the tests. NOTE EN 1729

39、-1 specifies functional dimensions and marking of chairs and tables for general educational purposes. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the la

40、test edition of the referenced document (including any amendments) applies. EN 1022:2005, Domestic furniture Seating Determination of stability EN 1335-3:2009, Office furniture Office work chair Part 3: Test methods !EN 1728:2012, Furniture Seating Test methods for the determination of strength and

41、durability“ EN 1729-1, Furniture Chairs and tables for educational institutions Part 1: Functional dimensions !EN 1730:2012, Furniture Tables Test methods for the determination of stability, strength and durability“ EN 13722, Furniture Assessment of the surface gloss !deleted text“ 3 General test co

42、nditions 3.1 Testing ranges of chairs and tables If chairs in a range of size marks are all manufactured with the same design details and geometry, it is only necessary to carry out the complete test programme on the highest size mark (including multi-size and height adjustable) in the range, plus a

43、dditional stability tests on the smallest size mark in the range. If tables in a range of size marks are all manufactured with the same design details and geometry, it is only necessary to carry out the complete test programme on the highest size mark in the range. In the event of failure in any of

44、the chairs/tables in the above test programme, it is necessary to carry out the complete test programme on each chair/table size mark individually. 3.2 Testing of height adjustable and multi-size chairs and tables Where tables or chairs can be set to a number of different configurations the worst ca

45、se configuration shall be tested. BS EN 1729-2:2012+A1:2015EN 1729-2:2012+A1:2015 (E)EN 1729-2:2012+A1:2015 (E) 6 Where tables and chairs can be adjusted to suit multiple size marks the item shall be assessed in accordance with EN 1729-1 at all size marks, and structural testing shall be carried out

46、 at the highest size mark only. 3.3 Sequence of testing Testing shall be carried out according to EN 1729-1 prior to testing in EN 1729-2. The tests shall be carried out in the order that the clauses are numbered in this European Standard. 4 Safety requirements In order to minimise the risk of perso

47、nal injury or damage to clothing, the following requirements apply: a) edges of the seat, back rest and arm rests, which are in contact with the user when sitting in the chair shall be rounded with a minimum 2 mm radius or chamfer; b) edges of the handles shall be rounded with a minimum 2 mm radius

48、in the direction of the force applied; c) all other edges and corners with which the user may come into contact with during normal use shall be smooth, rounded or chamfered and shall have no burrs; d) distance between accessible moving parts operated by powered mechanisms, e.g. gas lifts, shall alwa

49、ys be either 8 mm and 8 mm and 1 000 mm in length shall have two simultaneous vertical loads each 100 mm from the working edge, 300 mm each side of the middle N N 0 and 1 10 1 000 2 x 1 000 2 10 1 000 2 x 1 000 3 10 1 000 2 x 1 000 4 10 1 000 2 x 1 000 5 10 1 000 2 x 1 000 6 10 1 000 2 x 1 000 7 10 1 000 2 x 1 000 a) Tables 1 000 b) Tables 1 000 Figure 18 Vertical static load of tables BS EN 1729-2:2012+A1:2015EN 1729-2:2012+A1:2015 (E)EN 1729-2:2012+A1:2015 (E) 22 6.2.5 Vertical durability (!EN 1730:2012, 6.5“) This test is only