EN 1423-2012 en Road marking materials - Drop on materials - Glass beads antiskid aggregates and mixtures of the two (Incorporating corrigendum February 2013)《道路标记材料 撒布产品 玻璃丸 防滑集材及.pdf

《EN 1423-2012 en Road marking materials - Drop on materials - Glass beads antiskid aggregates and mixtures of the two (Incorporating corrigendum February 2013)《道路标记材料 撒布产品 玻璃丸 防滑集材及.pdf》由会员分享，可在线阅读，更多相关《EN 1423-2012 en Road marking materials - Drop on materials - Glass beads antiskid aggregates and mixtures of the two (Incorporating corrigendum February 2013)《道路标记材料 撒布产品 玻璃丸 防滑集材及.pdf（74页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 1423:2012Road marking materials Drop on materials Glassbeads, antiskid aggregates andmixtures of the twoBS EN 1423:2012Incorporating corrigendum February 2013BS EN 1423:201

2、2 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1423:2012, incorporating corrigendum February 2013. It supersedes BS EN 1423:1998 which is withdrawn.The start and finish of text introduced or altered by corrigendum is indicated in the text by tags. Text altere

3、d by CEN corrigendum February 2013 is indicated in the text by .The UK participation in its preparation was entrusted by Technical Committee B/509, Road equipment to Subcommittee B/509/2, Horizontal road markings and road studs.A list of organizations represented on this subcommittee can be obtained

4、 on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 82420 3ICS 93.080.20Compliance with a

5、 British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 February 2012.Amendments/corrigenda issued since publicationDate Text affected30 June 2013 Implementation of CEN corrigendum Fe

6、bruary 2013BS EN 1423:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1423 February 2012 ICS 93.080.20 Supersedes EN 1423:1997English Version Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two Produits de marquage routier - Produits de saup

7、oudrage - Microbilles de verre, granulats antidrapants et mlange de ces deux composants Straenmarkierungsmaterialien - Nachstreumittel - Markierungs-Glasperlen, Griffigkeitsmittel und Nachstreugemische This European Standard was approved by CEN on 17 December 2011. CEN members are bound to comply wi

8、th the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Mana

9、gement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same st

10、atus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portug

11、al, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any

12、 means reserved worldwide for CEN national Members. Ref. No. EN 1423:2012: EIncorporating corrigendum February 2013BS EN 1423:2012EN 1423:2012 (E) 2 Contents Foreword . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 6 4 Requirements . 7 4.1 Glass beads 7 4.1.1 Surface treatments of g

13、lass beads 7 4.1.2 Visibility characteristics 7 4.1.3 Granulometry . 8 4.1.4 Dangerous substances . 10 4.1.5 Durability aspects Resistance to chemicals: water, hydrochloric acid, calcium chloride and sodium sulphide . 10 4.2 Transparent antiskid aggregates . 10 4.2.1 pH value 10 4.2.2 Granulometry .

14、 10 4.2.3 Dangerous substances . 12 4.2.4 Durability aspects Resistance to fragmentation (friability) 12 4.3 Non transparent antiskid aggregates 12 4.3.1 pH value 12 4.3.2 Visibility characteristics 12 4.3.3 Granulometry . 13 4.3.4 Durability aspects Resistance to fragmentation (friability) 14 4.4 M

15、ixtures of glass beads and antiskid aggregates 14 4.4.1 General 14 4.4.2 Durability aspects 15 5 Testing, assessment and sampling methods . 15 5.1 General 15 5.2 Sampling . 15 5.3 Glass beads 16 5.3.1 Surface treatments of glass beads 16 5.3.2 Visibility characteristics 16 5.3.3 Granulometry . 16 5.

16、3.4 Dangerous substances . 16 5.3.5 Durability Resistance to chemicals: water, hydrochloric acid, calcium chloride and sodium sulphide 16 5.4 Transparent antiskid aggregates . 16 5.4.1 pH value 16 5.4.2 Granulometry . 17 5.4.3 Dangerous substances . 17 5.4.4 Durability Resistance to fragmentation (f

17、riability). 17 5.5 Non transparent antiskid aggregates 17 5.5.1 pH value 17 5.5.2 Visibility Characteristics . 17 5.5.3 Granulometry . 17 5.5.4 Durability Resistance to fragmentation (friability). 17 5.6 Mixture of glass beads and antiskid aggregates 17 6 Evaluation of conformity . 18 6.1 General 18

18、 6.2 Initial type testing and type testing 18 6.2.1 General 18 6.2.2 Test samples, testing and compliance criteria . 19 BS EN 1423:2012EN 1423:2012 (E) 3 6.2.3 Test reports 21 6.3 Factory Production control (FPC) 21 6.3.1 General . 21 6.3.2 Requirements . 21 6.3.3 Product specific requirements . 25

19、6.3.4 Initial inspection of factory and FPC . 26 6.3.5 Continuous surveillance of FPC 26 6.3.6 Procedure for modifications 26 7 Marking . 27 Annex A (normative) Test method to determine the refractive index of the glass beads . 28 A.1 General . 28 A.2 Principle . 28 A.3 Equipment and materials 29 A.

20、4 Procedure . 30 A.5 Expression of the results . 30 Annex B (normative) Test methods to determine the resistance of the glass beads to the effects of water, hydrochloric acid, calcium chloride and sodium sulphide . 31 B.1 Resistance to the effects of water . 31 B.2 Resistance to the effects of hydro

21、chloric acid 31 B.3 Resistance to the effects of calcium chloride 31 B.4 Resistance to the effects of sodium Sulphide . 31 Annex C (normative) Glass bead defects . 33 C.1 Oval glass beads (see Figure C.1) . 33 C.2 Satellites (see Figure C.2) . 33 C.3 Tear shaped glass beads (see Figure C.3) 33 C.4 G

22、lass beads fused together (see Figure C.4) . 34 C.5 Roundish glass beads (see Figure C.5) 34 C.6 Opaque glass beads (see Figure C.6) . 34 C.7 Milky glass beads (see Figure C.7) 35 C.8 Gas inclusions (see Figure C.8) . 35 C.9 Grains (see Figure C.9) . 35 C.10 Foreign particles 36 Annex D (normative)

23、Test method to determine maximum weighted percentage of defective glass beads Procedure . 37 D.1 General . 37 D.2 Results of counting . 38 Annex E (normative) Test method to determine the presence of the moisture proof coating . 40 E.1 Procedure A . 40 E.2 Procedure B . 41 Annex F (normative) Test m

24、ethod to determine the presence of floatation coating . 42 F.1 General . 42 F.2 Principle . 42 F.3 Apparatus and reagents . 42 F.4 Procedure . 42 F.5 Results 42 Annex G (normative) Test method to determine the friability index of the antiskid aggregates . 43 G.1 General . 43 G.2 Apparatus . 43 G.3 M

25、aterial to be tested 43 G.4 Procedure . 44 G.5 Expression of results 44 G.6 Precision 45 Annex H (informative) Alternative test methods to determine maximum weighted percentage of defective glass beads . 46 H.1 General . 46 H.2 Visual test method . 46 BS EN 1423:2012EN 1423:2012 (E) 4 H.3 Automatic

26、test method 47 Annex I (normative) Test method to determine the presence of dangerous substances . 53 I.1 Reference method 53 I.2 Quick alternative method 54 Annex J (normative) Test method to determine glass beads and antiskid aggregates ratio in mixtures of the two 55 J.1 General 55 J.2 Equipment

27、and material 55 J.3 Procedure . 55 J.4 Alternative methods 55 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive 57 Bibliography . 70 BS EN 1423:2012EN 1423:2012 (E) 5 Foreword This document (EN 1423:2012) has been prepared by

28、 Technical Committee CEN/TC 226 “Road equipment”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall b

29、e withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1423:1997. This

30、document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. The main ch

31、anges incorporated in this revision are: a) Modification of the definitions to clarify better the different products glass beads antiskid aggregates and mixtures of the two; b) Update of the standard to the new technologies that allow lower defects on glass beads with diameter equal or bigger than 1

32、 mm; c) Addition of the essential characteristic of dangerous substances for glass beads and transparent antiskid aggregates in glass; d) Addition of test method to determine presence of dangerous substances; e) Addition of test method to determine glass beads and antiskid aggregates ratio in mixtur

33、es of the two; f) Modification of the order of paragraphs to comply to the template for European Standards; g) Addition of Clause 6 “Evaluation of conformity”; h) Modification of parts of Annex ZA to comply to the template for product standard. According to the CEN/CENELEC Internal Regulations, the

34、national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla

35、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1423:2012EN 1423:2012 (E) 6 1 Scope This European Standard specifies the requirements applicable to glass beads, anti-skid aggregates, and the mixture of the two, which are ap

36、plied as drop-on materials on road markings products (i.e. paints, cold plastics and thermoplastics). Glass beads and/or anti-skid aggregates, or their mixture, applied during the process of manufacturing other road marking products are not covered by this European Standard. 2 Normative references T

37、he following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 787-9, General methods of test for pigments

38、 and extenders Part 9: Determination of pH value of aqueous suspension (ISO 787-9) ISO 565:1990, Test sieves Metal wire cloth, perforated metal plate and electroformed sheet Nominal sizes of openings ISO 2591-1, Test sieving Part 1: Methods using test sieves of woven wire cloth and perforated metal

39、plate ISO 7724-2, Paints and varnishes Colorimetry Part 2: Colour measurement 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 types of drop-on materials 3.1.1 glass bead transparent spherical glass particle, used to provide night visibility f

40、or the road markings by retroreflecting the incident headlight beams of a vehicle towards the driver NOTE This product is defined by five characteristics: refractive index, maximum weighted percentage of defective glass beads, granulometry, content of dangerous substances and resistance to chemicals

41、. In addition, surface treatment with its intended use need to be declared by manufacturer (if any). 3.1.2 antiskid aggregate hard grain of natural or artificial origin, used to provide antiskid qualities for the road markings NOTE This product is defined by the following characteristics: transparen

42、t antiskid aggregates: granulometry, resistance to fragmentation (friability); in addition, for transparent antiskid aggregates in glass, content of dangerous substances; non-transparent antiskid aggregate granulometry, resistance to fragmentation (friability) chromaticity co-ordinates and luminance

43、 factor. 3.1.3 mixture of glass beads and antiskid aggregates product which is a combination of here above product criteria and their relative ratio BS EN 1423:2012EN 1423:2012 (E) 7 3.2 intermediate bulk container IBC container with a capacity of up to 1 300 kg, used as an intermediate solution in

44、between bags and tins (25 kg to 50 kg) and bulk transport 4 Requirements 4.1 Glass beads 4.1.1 Surface treatments of glass beads 4.1.1.1 General Special coatings may be applied to the surface of the glass beads to enhance their properties. 4.1.1.2 Moisture proof coating Moisture proof coating is add

45、ed to avoid that the glass bead absorb air humidity. When tested in accordance with 5.3.1.1, the presence of moisture proof coating shall be declared as Pass” or “Fail”. 4.1.1.3 Floatation coating Floatation coating is added to glass beads mainly to allow to the beads to float (and so do not penetra

46、te too much inside) when dropped on road marking materials in liquid phase. When tested in accordance with 5.3.1.2 the presence of floatation coating shall be declared as Pass” or “Fail”. 4.1.1.4 Adhesion coating Adhesion coating is added to allow higher adhesion between the binder and the glass bea

47、ds when those are dropped on road marking materials. When the manufacturer declares the presence of an adhesion coating on the glass beads it shall be tested in accordance with a test method proposed by the manufacturer. The presence of the coating shall be declared as “Pass” or “Fail”. 4.1.1.5 Othe

48、r coatings When the manufacturer declares the presence of a coating, other than those in 4.1.1.2, 4.1.1.3 and 4.1.1.4, it shall be proved by testing the glass beads in accordance with a test method proposed by the manufacturer. The presence of the coating shall be declared as “Pass” or “Fail”. 4.1.2

49、 Visibility characteristics 4.1.2.1 Refractive index The refractive index or index of refraction of a substance is a measure of the speed of light in that substance. It is expressed as a ratio of the speed of light in vacuum relative to that in the considered medium. The refractive index n of glass beads, shall be determined in accordance with 5.3.2.1. It shall comply with the following classes: Class A n 1,5; Class B n 1,7; Class C n 1,9. BS EN 1423:2012EN 1423:2012 (E) 8 4.1.2.2 Maximum weighted percentage of defective glass beads