EN 13569-2001 en Cabinet Roller Towels - Performrnce Requirements and Processing《盒式卷筒卫生纸 性能要求和加工》.pdf

《EN 13569-2001 en Cabinet Roller Towels - Performrnce Requirements and Processing《盒式卷筒卫生纸 性能要求和加工》.pdf》由会员分享，可在线阅读，更多相关《EN 13569-2001 en Cabinet Roller Towels - Performrnce Requirements and Processing《盒式卷筒卫生纸 性能要求和加工》.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Cabinet roller towels - Performance requirements and processing The European Standard EN 13569:ZOOl has the status of a British Standard ICs 59.080.30 BS EN 13569:2001 Incorporating Corrigendum No. 1 E!lEmE%- U- imF%iE% =EE%irn NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED B

2、Y COPYRIGHT LAW BS EN 13569:ZOOl 13523 Corrigendum No i. National foreword 31 October 2001 Addition of supersession details to the National foreword This British Standard is the official English language version of EN 13569:2001. It supersedes BS 7311-1:1990 and BS 7311-2:1993 which are withdrawn. T

3、he UK participation in its preparation was entrusted to Technical Committee TCI/83, Industrial laundering, which has the responsibility to: - - aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep t

4、he UK interests informed monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European public

5、ations referred to in this document may be found in the BSI Standards Catalogue under the section entitled ?International Standards Correspondence Index?, or by using the ?Find? facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provi

6、sions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. This British Standard, having been prepared under the direction of the Sector Policy and Strategy Committee for

7、 Materials and Chemicals, was published under the authority of the Standards Policy and Strategy Committee on 28 August 2001 Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 16, an inside back cover and a back cover. The BSI copyright date

8、displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. IDate I Comments Q BI 31 October 2001 ISBN O 580 37770 9 EUROPEAN STANDARD EN 13569 NORME EUROPENNE EUROPISCHE NORM July 2001 ICs 59.080.30: 97.160 English version Cabinet roller towe

9、ls - Performance requirements and processing Serviettes textiles essuie-mains en bobine pour distributeur - Criteres de performance et traitement Rollenhandtcher fr Handtuchspender - Anforderungen und Behandlung This European Standard was approved by CEN on 10 May 2001. CEN members are bound to comp

10、ly with the CENICENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management

11、Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officia

12、l versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMlTTEE FOR STANDARDIZATION COMITE E

13、UROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stascart, 36 8-1050 Bnissels O 2001 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13569:2001 E EN 13569:2001 (E) Contents Page Foreword . 3 I Scope

14、3 2 Normative references 3 3 Terms and definitions . 4 4 Characteristics of the towel . 4 5 Testing 7 6 Towel processing 7 7 Declaration of conformity . 8 Annex A (informative) Example of suitable fabric structure 9 Annex B (informative) Recommendations for the care. use and transportation of towels

15、 . 10 Annex C (informative) Key process variables . 11 Annex D (informative) Preparation and application of bioindicators for validation of the process to achieve hygienic cleanliness 13 Annex E (informative Types of cabinet roller towel dispenser . 16 2 EN 13569:2001(E) Foreword This European Stand

16、ard has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2002, and

17、conflicting national standards shall be withdrawn at the latest by January 2002. Anexes A, B, C, D and E are for information Only. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,

18、 Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. I Scope This Standard specifies requirements for the following: a) Three categories of cabinet towel, the catego

19、ries being defined in terms of mass per unit area and tensile strength of the fabric; certain constructional and performance requirements are also covered. b) Process validation procedures to ensure that cabinet towels achieve the condition of hygienic cleanliness in processing. It also contains inf

20、ormative annexes containing the following: - an example of suitable fabric structure, - recommendations for the care, use and transportation of cabinet towels after processing, - examples of key process variables for disinfection, - the preparation and application of bioindicators for the validation

21、 of the process to achieve hygienic cleanliness. The colour fastness to washing test and the requirement level are based on the assumption that chlorine bleaching treatments will not be used in laundering. 2 Normative references This European Standard incorporates by dated or undated reference provi

22、sions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it b

23、y amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 141 3, Textiles - Determination of pH of aqueous extract 3 EN 13569:2001 (E) EN 1644-1 :I 997, Test methods for nonwoven compresses for medical use - Part 1: Nonwovens

24、 used in the manufacture of compresses EN 1773, Textile - Fabrics - Determination of width and length EN 121 27, Textiles - Fabrics - Determination of mass per unit area using small samples EN IS0 105-XI 2, Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (IS0 105-X12:1993

25、) EN IS0 13934-1 Textiles - Tensile properties of fabrics - Part 1 : Determination of maximum force and elongation at maximum force using the strip method (IS0 13934- I r1999) EN 20105-CO4, Textiles - Tests for colour fastness -Part C04: Colour fastness to washing: Test 4 (IS0 105-CO4: 1989) IS0 535

26、1 -1, Cellulose in dilute solutions - Determination of limiting viscosity number- Part 1: Method in cupri-ethylene-diamine (CED) solution IS0 7771, Textiles - Determination of dimensional changes of fabrics induced by cold-water immersion 3 Terms and definitions For the purposes of this standard, th

27、e following terms and definitions apply. 3.1 cabinet roller towel reusable textile fabric rolls manufactured for use in particular types of towel dispenser unit so that a clean length of towelling is provided, either automatically or through manual action, for the purpose of drying the hands of the

28、user 4 Characteristics of the towel 4.1 Functional characteristics 4.1 .I General The functional characteristics are dictated by the requirements of rolling and unrolling the towel in the dispenser and of the wiping and drying of the hands. 4.1.2 Strength and selvedges The towel needs to have suffic

29、ient strength (see Table 1) to withstand the pulling action exerted when the towel is rolled and unrolled as well as when the hands are wiped and dried by the user. Selvedges need to be constructed so the towel rolls and unrolls correctly within the dispenser for which it is designed (See 4.2.2.2).

30、4.1.3 Wiping function In order to wipe the hands effectively the towel needs to be readily moulded by the hands and fingers, exert sufficient friction to feel comfortable when in contact with the skin, and present an irregular surface to improve the removal of residual substances from the hands. The

31、se attributes. can only be assessed subjectively. 4 EN 13569:2001(E) 4.1.4 Drying function The fabric shall have a high capacity for the rapid absorption of water. The liquid absorbancy time is taken as measure for the drying properties (see 4.2.2.1). 4.1.5 Cleanliness For the purposes of this stand

32、ard, a towel shall be considered to be hygienically clean when treated in a disinfecting process carried out according to a validated washing and finishing procedure (see clause 6). As micro-organisms may start to multiply as soon as the disinfecting process is complete, its effectiveness is maintai

33、ned by the removal of soil and stains (sources of nutrients) and adequately drying the towel. NOTE Moisture and a source of nutrients are required by the micro-organisms in order to multiply. 4.2 Technical characteristics 4.2.1 Fibres Cotton or man-made fibres or blends shall be used to produce plai

34、n or twisted yarns for weaving the fa bric. NOTE The introduction of polyester has the effect of augmenting the resistance to pilling and abrasion, but reducing the absorption capacity (e.g. The introduction of 50 % polyester reduces the absorption capacity by approximately 25 %), conversaly the int

35、roduction of man-made fibres can augment the absorption; for example a mixture composed of 62 % cotton, 25 % polyester and 13 % viscose has a similar rate of absorption capacity to that of a 100 % cotton fabric. 4.2.2 Fabric 4.2.2.1 Properties and performance a) Fabrics shall conform to the requirem

36、ents shown in Table 1. The requirements of Table 1 apply to towels, which have been bleached in manufacture, and prior to the first processing (see 4.1 5) in the laundry. NOTE Bleaching by the manufacturer before supply to the laundry is the more common practice. If the conditions of supply vary, th

37、en the point at which the performance requirements apply will vary also and some ammendment of the values given in Table 1 may be needed. b) Dyed fabrics shall also comply with the requirements shown in Table 2. 5 EN 13569:2001 (E) light medium heavy Table I - Towel properties prior to first process

38、ing (4.1.5) less than 200 210 f 10 greater than 220 Towel category Mass per unit area I I g/m2 Minimum Maximum tensile dimensional fabric 630 340 650 390 -5 670 440 weft % it2 I Test I EN 12127 I EN IS0 13934-1 I IS07771 method Table 2 - Colour fastness Degree of polymeri- cation in cotton fibre abs

39、orbancy time Colour fastness to: Minimum rating Colour change Stai n ing washing rubbing: Test method EN 201 05C04 EN IS0 105x12 washing and drying the sample once in accordance with EN 201 05-CO4, and place on the rubbing finger, with reference fabric on the block. 4.2.2.2 Structure Selvedges shall

40、 either be woven or tucked in. Selvedges shall be constructed so the towel rolls and unrolls correctly within the dispenser for which it is designed. Because of their importance to the perfomance of the towel and the functioning of the cabinet, selvedges should be properly constructed. NOTE 1 presen

41、t, no agreed meaningful test for selvedge performance. Some towels may include polyester yarns in the selvedge to provide extra strength. There is, at NOTE 2 Examples of suitable structures are given in annex A. 4.3 Suitability for dispensers 4.3.1 General The towel under normal tension shall fit ea

42、sily into the compartments of the dispenser cabinet for which it is intended to be used and its width shall not exceed that of the entry and exit openings of the dispenser. 6 EN 13569:2001(E) 4.3.2 Length and width In order to fit the different types of dispenser available, the stated length of a to

43、wel may vary from 20 m to 45 m (measured according to EN 1773), and the stated width from 0,19 m to 0,30 m (measured according to EN 1773). However, particular types of dispenser may require towels of different dimensions. The towel shall be capable of being loaded in such a way that it will allow t

44、he dispenser, for which it is designed, to function properly without causing any blockage. 4.4 Specifications 4.4.1 Performance in service Table 3 denotes the fabric specification for all cabinet towels at the time of every supply to the end- user whilst compliance with this Standard is claimed. Tab

45、le 3 - Fabric properties at the time of every supply Liquid absorbence time annex B Hygienic cleanliness Presentation See 4.1.5 and clause 6 The towel shall be finished, dry, rolled and fit for purpose, which includes its use in the T dispenser The towel shall be free from unacceptable stains (as de

46、fined in the contract with the customer). 5 Testing Sampling frequency shall be as agreed in the contract between the parties. From each roll to be tested a laboratory sample shall be cut, from a position taken at random, but at least 3 m from the end of the roll. The laboratory sample shall be larg

47、e enough to provide test specimens for all the tests required by this standard. 6 Towel processing 6.1 Hygienic processing of towels This Standard requires that hygienic cleanliness shall be achieved during the washing and finishing process. Instead of specifying processes there is a requirement to

48、design, validate and monitor the chosen procedure, using the method described in this clause. 7 EN 13569:2001 (E) 6.1.1 The laundry operator shall design a disinfecting process into the washing and finishing process for the towel. The design shall take the form of a process specification with a deta

49、iled list of the important process variables (See annex C for examples), together with their minimum values. Design of the disinfecting process 6.1.2 Validation of the process The designed process shall be validated for achieving the necessary level of bacteria kill. This shall be carried out whilst operating at or above the minimum values in the process specification and using bioindicators as described in annex D or textile samples inoculated with benign indicator organisms. A micro-organism reduction of at least IO5 shall be achieved. Validation shall be carried out at a freq