EN 13501-3-2005 en Fire classification of construction products and building elements - Part 3 Classification using data from fire resistance tests on products and elements used in.pdf

《EN 13501-3-2005 en Fire classification of construction products and building elements - Part 3 Classification using data from fire resistance tests on products and elements used in.pdf》由会员分享，可在线阅读，更多相关《EN 13501-3-2005 en Fire classification of construction products and building elements - Part 3 Classification using data from fire resistance tests on products and elements used in.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 13501-3:2005Fire classification of construction products and building elements Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampersICS 13.220.50g49g50g3g38g50g51g60g44

2、g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A1:2009 National forewordThis British Standard is the UK implementation of EN 13501-3:2005+A1:2009. It supersedes BS EN 13

3、501-3:2005 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its prep

4、aration was entrusted to Technical Committee FSH/22, Fire resistance tests.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct

5、application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 13501-3:2005+A1:2009Amendments/corrigenda issued since publicationDate Comments 30 November 2009 Implementation of CEN amendment A1:2009This British Standard waspublished under the authorityof the Stan

6、dards Policy and Strategy Committeeon 25 January 2006 BSI 2009ISBN 978 0 580 59863 0EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13501-3:2005+A1 September 2009 ICS 13.220.50 Supersedes EN 13501-3:2005English Version Fire classification of construction products and building elements - Part 3:

7、 Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers Classement au feu des produits et lments de construction - Partie 3: Classement utilisant des donnes dessais de rsistance au feu de produits et

8、 lments utiliss dans des installations dentretien: Conduits et clapets rsistants au feu Klassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten - Teil 3: Klassifizierung mit den Ergebnissen aus den Feuerwiderstandsprfungen an Bauteilen von haustechnischen Anlagen: Feuerwiderstandsfhige

9、 Leitungen und Brandschutzklappen This European Standard was approved by CEN on 22 September 2005 and includes Amendment 1 approved by CEN on 17 July 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the s

10、tatus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German)

11、. A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Repu

12、blic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE

13、 NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13501-3:2005+A1:2009: EEN 13501-3:2005+A1:2009 (E) 2 Contents Page Foreword 3In

14、troduction .41 Scope 52 Normative references 53 Terms and definitions .54 Fire scenarios .64.1 General 64.2 The standard temperature/time curve (post flashover fire) 65 Resistance to fire performance characteristics .75.1 Performance characteristics 75.1.1 Introduction 75.1.2 E Integrity 75.1.3 I In

15、sulation .85.1.4 S Smoke leakage.86 Declaration of fire resistance performance 86.1 Classification periods .86.2 Designatory letters 86.3 Declaration of performance 86.4 Combinations of classes 96.5 Presentation of classification .96.6 Declaration of fire resistance classes in product specifications

16、 .97 Classification procedure for fire resistance .97.1 General 97.1.1 Procedure .97.1.2 General rules for deducing the number of fire resistance tests 107.1.37.2 Classification . 117.2.1 General . 117.2.2 Ventilation ducts . 117.2.3 Fire dampers . 13Annex A (normative) Classification report 16A.1 G

17、eneral . 16A.2 Content and format . 16Bibliography . 20BS EN 13501-3:2005+A1:2009Field of application . 11 EN 13501-3:2005+A1:2009 (E) 3 Foreword This document (EN 13501-3:2005+A1:2009) has been prepared by Technical Committee CEN/TC 127 “Fire safety in buildings”, the secretariat of which is held b

18、y BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by March 2010. Attention is drawn to the possibility that som

19、e of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-07-17. This document supersedes EN 13501-3:2005. The start and finish of

20、 text introduced or altered by amendment is indicated in the text by tags!“XThis European Standard has been prepared under a Mandate given to CEN by the Commission of the European Communities and the European Free Trade Association, and supports essential requirements of the Construction Products Di

21、rective. Amendment 1 provides for the use of extended application reports in the classification procedure. CEN, CENELEC and EOTA committees preparing technical specifications which contain performance requirements against fire resistance tests should make reference to the fire resistance classificat

22、ion given in this European Standard and not refer directly to any specific fire test method. EN 13501 consists of the following parts: Part 1: Classification using data from reaction to fire tests, Part 2: Classification using data from fire resistance tests, excluding ventilation services, Part 3:

23、Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers, Part 4: Classification using data from fire resistance tests on components of smoke control systems, Part 5: Classification using data from ext

24、ernal fire exposure to roofs tests. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece

25、, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 13501-3:2005+A1:2009EN 13501-3:2005+A1:2009 (E) 4 Introduction The aim of this European Standard is to de

26、fine a harmonised procedure for the classification for resistance to fire of construction products and elements. This classification is based on the test procedures listed in Clause 2 and the relevant field of application procedures . This European Standard is prepared in support of the second essen

27、tial requirement in the EC Construction Products Directive (89/106/CEC), which is detailed in the Interpretative Document number 2 (ID2): Safety in case of fire (OJ C62 Vol 37). It reflects the Commission Decision of 3 May 2000 on the implementation of the Council Directive 89/106/EEC as regards the

28、 classification of the resistance to fire performance of construction products, construction works and parts thereof. The Interpretative Document and the Commission Decision of 3 May 2000 specify performance and classes regarding fire resistance. These classes are identified by designation letters,

29、each of which refers to an important characteristic of fire resistance behaviour. This European Standard provides for a common understanding for these requirements. It interprets the functional requirements for the different groups of building products and elements and explains the method for derivi

30、ng their classification on the basis of test results and/or extended application results for individual products or elements. NOTE Test reports constitute the basis for extended application reports as explained in prEN 15725. BS EN 13501-3:2005+A1:2009EN 13501-3:2005+A1:2009 (E) 5 1 Scope This Europ

31、ean Standard specifies the procedure for classification of the resistance to fire performance of construction products and building elements used as components of building service installations, using data from fire resistance tests which are within the direct field of application of the relevant te

32、st method. !Classification on the basis of extended application of test results is also included in the scope of this European Standard.“ Products/elements for use in ventilation systems include (excluding smoke and heat exhaust ventilation): fire resisting ducts; fire dampers. Relevant test methods

33、 which have been prepared for these products/elements are listed in Clause 2. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of

34、 the referenced document (including any amendments) applies. EN 1366-1:1999, Fire resistance tests for service installations Part 1: Ducts EN 1366-2:1999, Fire resistance tests for service installations Part 2: Fire dampers !prEN 15725, Extended application reports on the fire performance of constru

35、ction products and building elements“ EN ISO 13943:2000, Fire safety Vocabulary (ISO 13943:1999) 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN ISO 13943:2000, and the following apply. 3.1 direct field of application the outcome of a process

36、 (involving the application of defined rules) whereby a test result is deemed to be equally valid for variations in one or more of the product properties and/or intended end use applications 3.2 extended field of application the outcome of a process (involving the application of defined rules that m

37、ay incorporate calculation procedures) that predicts, for a variation of a product property and/or its intended end use application(s), a test result on the basis of one or more test results to the same test standard 3.3 test specimen element (or part) of building construction provided for the purpo

38、se of determining either its fire resistance or its contribution to the fire resistance of another building element EN 1363-1:1999 BS EN 13501-3:2005+A1:2009EN 13501-3:2005+A1:2009 (E) 6 NOTE For the purposes of this European Standard this definition refers to a specific component of a service insta

39、llation. 3.4 fire resisting duct duct used for the distribution or extraction of air and designed to provide a degree of fire resistance EN 1366-1:1999 NOTE Fire resisting ducts may be subject to an additional classification S: smoke leakage. 3.5 fire damper mobile closure within a duct which is des

40、igned to prevent the passage of fire EN 1366-2:1999 NOTE Fire dampers may be subject to an additional classification S: smoke leakage. !3.6 extended application result predicted result for performance parameter obtained following the process of extended field of application 3.7 extended application

41、report document reporting extended application results, including all details of the process leading to those results, prepared in accordance with prEN 15725“ 4 Fire scenarios 4.1 General Fire resistance shall be assessed using the thermal attack given in 4.2. NOTE Other heating curves may exist: sm

42、ouldering fire test is only used if the fire resistance performance of the product/element is expected to be reduced by exposure to temperatures associated with the growth stage of a fire. It is, therefore, particularly relevant to products/elements whose performance may be dependent upon high heati

43、ng rates below approximately 500 C (as provided during the standard temperature/time curve) for achievement of their classifications (i.e. mainly reactive or intumescent products). Further details relating to the practical application of this curve, and other test parameters, e.g. tolerances, are gi

44、ven in EN 1363-2; hydrocarbon curve is another example; also for extreme fire scenarios (e.g. traffic tunnels and nuclear plants), more severe conventional curves may be specified. These are not, however, used for the classification of elements according to this European Standard. 4.2 The standard t

45、emperature/time curve (post flashover fire) When applied as a basis for testing, the standard temperature/time relationship shall be applied for the full duration of the test. The relationship, which is a model of a fully developed fire in a compartment, is given by the following relationship: T = 3

46、45 log10(8t + 1) + 20 (1) BS EN 13501-3:2005+A1:2009EN 13501-3:2005+A1:2009 (E) 7 where t is the time from the start of the test in minutes, and T is the mean furnace temperature in C. Further details relating to the practical application of this curve, and other test parameters, e.g. tolerances, ar

47、e given in EN 1363-1. 5 Resistance to fire performance characteristics 5.1 Performance characteristics 5.1.1 Introduction 5.1.2 to 5.1.4 describe which performance characteristics apply to which products/elements. 5.1.2 E Integrity Integrity E is the ability of a component of a service installation

48、to prevent the transmission of fire as a result of the passage of significant quantities of flames or hot gases from the fire to the unexposed side, thereby causing ignition either of the non-fire exposed surface or of any material adjacent to that surface. The assessment of integrity is made on the

49、 basis of one or more of the following aspects simultaneously: cracks or openings in excess of given dimensions; ignition of a cotton pad; sustained flaming on the unexposed side; leakage in excess of given values. The integrity shall be determined by all methods during the test. The cotton pad procedure shall be applied until the pad ignites and, once it has ignited, it shall