EN 13355-2004 en Coating plants - Combined booths - Safety requirements (Incorporates Amendment A1 2009)《涂覆设备 混合室 安全要求 包含修改件A1-2009》.pdf

《EN 13355-2004 en Coating plants - Combined booths - Safety requirements (Incorporates Amendment A1 2009)《涂覆设备 混合室 安全要求 包含修改件A1-2009》.pdf》由会员分享，可在线阅读，更多相关《EN 13355-2004 en Coating plants - Combined booths - Safety requirements (Incorporates Amendment A1 2009)《涂覆设备 混合室 安全要求 包含修改件A1-2009》.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13355:2004Coating plants Combined booths Safety requirementsICS 87.100g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58g14g36g

2、20g29g21g19g19g28BS EN 13355:2004+A1:2009This British Standard was published under the authority of the Standards Policy and Strategy Committee on 19 January 2005 BSI 2009ISBN 978 0 580 63169 6National forewordThis British Standard is the UK implementation of EN 13355:2004+A1:2009.It supersedes BS E

3、N 13355:2004, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee MCE/3/8, Thermoprocessing equipment. A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the ne

4、cessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationDate CommentsThe start and finish of text introduced or altered by amendment is indicated

5、in the text by tags. Tags indicating changes to CEN text carry the number ofthe CEN amendment. For example, text altered by CEN amendment A1 isindicated by . g36;#g36;#31 May 2009 Implementation of CEN amendment A1:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13355:2004+A1 April 2009 ICS

6、 87.100 Supersedes EN 13355:2004English Version Coating plants - Combined booths - Safety requirements Installations dapplication - Cabines mixtes dapplication et de schage - Prescriptions de scurit Beschichtungsanlagen - Kombinierte Spritz- und Trocknungskabinen - Sicherheitsanforderungen This Euro

7、pean Standard was approved by CEN on 22 November 2004 and includes Amendment 1 approved by CEN on 22 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any

8、alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by

9、 translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

10、Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T E U R O P E N D E N O R M A LI S A T I O N EUR

11、OP IS C HES KOM ITEE FR NOR M UNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13355:2004+A1:2009: EEN 13355:2004+A1:2009 (E) 2 Contents Page Foreword 4g3Introduction . 5

12、g31g3 Scope 6g32g3 Normative references 7g33g3 Terms and definitions . 9g34g3 List of significant hazards 11g34.1g3 General 11g34.2g3 Mechanical hazards . 11g34.3g3 Electrical hazards 12g34.4g3 Thermal hazards 12g34.5g3 Hazards generated by noise . 12g34.6g3 Hazards generated by radiation . 13g34.7g

13、3 Hazards resulting from dangerous substances . 13g34.8g3 Fire and explosion hazards 13g34.9g3 Hazards caused by failure of the energy supply and malfunction of the control system . 14g34.10g3 Hazards caused by emergency stop devices . 14g35g3 Safety requirements and/or measures 14g35.1g3 General 14

14、g35.2g3 Mechanical 15g35.3g3 Electrical . 16g35.4g3 Thermal . 16g35.5g3 Noise . 16g35.6g3 Radiation . 17g35.7g3 Safety requirements against dangerous substances 17g35.8g3 Fire and explosion prevention and protection . 19g35.9g3 Failure of energy supply and malfunction of the control system . 23g35.1

15、0g3 Emergency stop devices . 24g36g3 Verification of the safety measure and/or measures . 24g36.1g3 General 24g36.2g3 Mechanical 24g36.3g3 Electrical . 24g36.4g3 Thermal . 24g36.5g3 Noise . 24g36.6g3 Radiation . 24g36.7g3 Dangerous substances . 24g36.8g3 Fire and explosion . 25g36.9g3 Failure of ene

16、rgy supply . 26g36.10g3 Emergency stop devices . 26g37g3 Information for use 26g37.1g3 General 26g37.2g3 Instruction handbook 27g37.3g3 Marking . 29g3Annex A (normative) Determination of concentration of flammable solvents in terms of LEL (spraying mode) 31g3A.1g3 Equations 31g3A.2g3 Examples of cal

17、culation 32g3Annex B (normative) Measurement of air velocities . 34g3BS EN 13355:2004+A1:2009EN 13355:2004+A1:2009 (E) 3 B.1g3 Instrumentation 34g3B.2g3 Measurement conditions 34g3Annex C (informative) Classification of materials reaction to the fire National standards . 41g3Annex D (informative) Re

18、ferences to national exposure limit values . 42g3Annex E (informative) Equivalence between zone description and categories of ignition protection 43g3Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC !, amended by 98/79/EC“ 44g

19、3Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 45g3Bibliography 46g3BS EN 13355:2004+A1:2009EN 13355:2004+A1:2009 (E) 4 Foreword This document (EN 13355:2004+A1:2009) has been prepared by Technical Committee CEN/TC 27

20、1 “Surface treatment equipment Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn

21、 at the latest by December 2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s) 98/37/EC and 94/9/EC. !For relationship with EU Directive(s), see informative Annex

22、es ZA and ZB, which are integral parts of this document.“ This document includes Amendment 1, approved by CEN on 2009-02-22. This document supersedes EN 13355:2004. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document is part of a series

23、 of standards in the area of safety for development and construction of machines and plants for the coating of surfaces with organic substances (paints, varnishes and similar products). This document is mainly based on EN 12215 and EN 1539. NOTE Although a spray booth, as an integral whole, formally

24、 does not fall under the scope of the ATEX Directive 94/9/EC, the document is based upon a fundamental risk analysis according to this directive. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European St

25、andard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. B

26、S EN 13355:2004+A1:2009EN 13355:2004+A1:2009 (E) 5 Introduction This document is a C-type standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type

27、 C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. BS EN 13355:2004+A1:2

28、009EN 13355:2004+A1:2009 (E) 6 1 Scope This document is applicable to combined booths for the application of organic liquid coating materials by an operator with maximum drying temperature of 100 C and deals with all hazards significant for combined booths, when they are used as intended and under t

29、he conditions foreseen by the manufacturer (see clause 4). To the extent of this document, a combined booth is considered an assembly of the following equipment: forced ventilation by one or more fans, ventilation air heating system (e. g. heat exchanger or burner), power driven dampers, forced vent

30、ilation ducting, dry air filtering and/or wet air washing systems, automatic fire extinguishing equipment and additional specific electrical equipment, control and power circuits joined together for the spraying and drying process of liquid coating material in a space totally enclosed provided with

31、forced ventilation. working pit, in special case. This document does not cover: a) booths for automatic spraying, powder spray booths, open booths, and portable heaters. b) design of the building foundations upon which a booth is installed; c) the civil engineering and building design where a booth

32、is constructed as, or to use part of, a new or existing building; d) spraying equipment (see EN 1953), automatic devices for spraying systems like robots (see EN 775) or reciprocators or similar systems, conveyors, lifts and continuous handling equipment and systems (see EN 619). This document is no

33、t applicable to combined booths which are manufactured before the date of publication of this standard by CEN. BS EN 13355:2004+A1:2009EN 13355:2004+A1:2009 (E) 7 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, o

34、nly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 418, Safety of machinery Emergency stop equipment, functional aspects Principles for design EN 525, Non-domestic direct gas-fired forced convection air heaters

35、for space heating not exceeding a net heat input of 300 kW EN 563, Safety of machinery Temperatures of touchable surfaces Ergonomics data to establish temperature limit values for hot surfaces EN 746-1, Industrial thermoprocessing equipment Part 1: Common safety requirements for industrial thermopro

36、cessing equipment EN 746-2, Industrial thermoprocessing equipment Part 2: Safety requirements for combustion and fuel handling systems EN 954-1, Safety of machinery Safety related parts of control systems Part 1: General principles for design EN 971-1:1996, Paints and varnishes Terms and definitions

37、 for coating materials Part 1: General terms EN 981, Safety of machinery System of auditory and visual danger and information signals EN 982, Safety of machinery Safety requirements for fluid power systems and their components Hydraulics EN 983, Safety of machinery Safety requirements for fluid powe

38、r systems and their components Pneumatics EN 1037, Safety of machinery Prevention of unexpected start-up EN 1088, Safety of machinery Interlocking devices associated with guards Principles for design and selection EN 1127-1:1997, Explosive atmospheres Explosion prevention and protection Part 1: Basi

39、c concepts and methodology EN 1539:2000; Dryers and ovens, in which flammable substances are released Safety requirements EN 1953, Atomising and spraying equipment for coating materials Safety requirements !EN 12753“, Thermal cleaning systems for exhaust gas from surface treatment equipment Safety r

40、equirements EN 12433-1, Industrial, commercial and garage doors and gates Terminology Part 1: Types of doors EN 12433-2, Industrial, commercial and garage doors and gates Terminology Part 2: Parts of doors EN 12445, Industrial, commercial and garage doors and gates Safety in use of power operated do

41、ors Test methods EN 12453, Industrial, commercial and garage doors and gates Safety in use of power operated doors Requirements EN 12635, Industrial, commercial and garage doors and gates Installation and use EN 12978, Industrial, commercial and garage doors and gates Safety devices for power operat

42、ed doors and gates Requirements and test methods BS EN 13355:2004+A1:2009EN 13355:2004+A1:2009 (E) 8 EN 13463-1:2001, Non-electrical equipment for potentially explosive atmospheres Part 1: Basic method and requirements EN 13463-5, Non-electrical equipment intended for use in potentially explosive at

43、mospheres Part 5: Protection by constructional safety “c“ EN 13478, Safety of machinery Fire prevention and protection !EN 14462:2005, Surface treatment equipment Noise test code for surface treatment equipment including its ancillary handling equipment Accuracy grades 2 and 3“ !EN 14986“, Design of

44、 fans working in potentially explosive atmospheres EN 60079-0, Electrical apparatus for explosive gas atmospheres Part 0: General requirements (IEC 60079-0:2004) EN 60079-15, Electrical apparatus for explosive gas atmospheres Part 15: Type of protection “n” (IEC 60079-15:2001, modified) EN 60204-1:1

45、997, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:1997) EN 60529, Degrees of protection provided by enclosures (IP code) EN 61000-6-1, Electromagnetic compatibility (EMC) Part 6-1: Generic standards; Immunity for residential, commercial and light-ind

46、ustrial environments (IEC 61000-6-1:1997, modified) EN 61000-6-3, Electromagnetic compatibility (EMC) Part 6-3: Generic standards; Emission standard for residential, commercial and light-industrial environments (IEC 61000-6-3:1996, modified) EN 61000-6-4, Electromagnetic compatibility (EMC) Part 6-4

47、: Generic standards; Emission standard for industrial environments (IEC 61000-6-4:1997, modified) EN ISO 3746, Acoustics Determination of sound power levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995) EN ISO 4871

48、, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11202, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Survey method in situ (ISO 11

49、202:1995) EN ISO 12100-1, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) EN ISO 14122-2, Safety of machinery Permanent means of access to machinery Part 2: Working platforms and walkways (IS