EN 13166-2012 en Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification (Incorporates Amendment A1 2015)《为建筑保温产品 工厂生产酚醛泡沫(PF)产品规范》.pdf

《EN 13166-2012 en Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification (Incorporates Amendment A1 2015)《为建筑保温产品 工厂生产酚醛泡沫(PF)产品规范》.pdf》由会员分享，可在线阅读，更多相关《EN 13166-2012 en Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification (Incorporates Amendment A1 2015)《为建筑保温产品 工厂生产酚醛泡沫(PF)产品规范》.pdf（52页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 13166:2012Thermal insulation products for buildings Factory made phenolic foam (PF) products SpecificationBS EN 13166:2012+A1:2015BS EN 13166:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13166:2012+A1:2015.It supers

2、edes BS EN 13166:2012, which is withdrawn.The start and finish of text introduced or altered by amendment isindicated in the text by tags. Tags indicating changes to CEN text carrythe number of the CEN amendment. For example, text altered by CENamendment A1 is indicated by .The UK participation in i

3、ts preparation was entrusted to TechnicalCommittee B/540, Energy performance of materials components andbuildings.A list of organizations represented on this committee can be obtainedon request to its secretary.This publication does not purport to include all the necessary provisionsof a contract. U

4、sers are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015.ISBN 978 0 580 86745 3ICS 91.100.60Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority

5、 of the StandardsPolicy and Strategy Committee on 28 February 2013.Amendments/corrigenda issued since publicationDate Text affected30 April 2015 Implementation of CEN amendment 1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13166:2012+A1 February 2015 ICS 91.100.60 Supersedes EN 13166:20

6、12English Version Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en mousse phnolique (PF) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Phenolharzsch

7、aum (PF) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of

8、 a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German)

9、. A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, C

10、yprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

11、Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 131

12、66:2012+A1:2015 EEN 13166:2012+A1:2015 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .7 4 Requirements 11 5 Test methods . 17 6 Designation code 19 7 Assessment and Verification of the Constancy of Performance (AVCP) . 20

13、 8 Marking and labelling . 21 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 22 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 24 Annex C (normative) Determination of the aged values of therma

14、l resistance and thermal conductivity . 28 Annex D (informative) Additional properties . 33 Annex E (normative) PF multi-layered thermal insulation products 34 Annex ZA Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 36

15、Bibliography . 47 Tables Table 1 Tolerances for length and width 12 Table 2 Classes for thickness tolerances . 12 Table 3 Tolerances for deviation from flatness . 13 Table 4 Dimensional stability under specified temperature and humidity conditions 14 Table 5 Levels for compressive strength . 14 Tabl

16、e 6 Levels for tensile strength perpendicular to faces 15 Table 7 Levels for short term water absorption by partial immersion 16 Table 8 Levels for long term water absorption by partial immersion 16 Table 9 Test methods, specimens and conditions 18 Table A.1 Values for k for one side 90 % tolerance

17、interval with a confidence level of 90 % . 23 Table B.1 Minimum number of tests for !PTD“ and minimum product testing frequencies . 24 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics (1 of 2) . 26 Table C.1 Test times for product thicknesses . 30 BS EN 13166:20

18、12+A1:2015EN 13166:2012+A1:2015 (E)EN 13166:2012+A1:2015 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .7 4 Requirements 11 5 Test methods . 17 6 Designation code 19 7 Assessment and Verification of the Constancy of Perfo

19、rmance (AVCP) . 20 8 Marking and labelling . 21 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 22 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 24 Annex C (normative) Determination of the age

20、d values of thermal resistance and thermal conductivity . 28 Annex D (informative) Additional properties . 33 Annex E (normative) PF multi-layered thermal insulation products 34 Annex ZA Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Produc

21、ts Regulation“ 36 Bibliography . 47 Tables Table 1 Tolerances for length and width 12 Table 2 Classes for thickness tolerances . 12 Table 3 Tolerances for deviation from flatness . 13 Table 4 Dimensional stability under specified temperature and humidity conditions 14 Table 5 Levels for compressive

22、strength . 14 Table 6 Levels for tensile strength perpendicular to faces 15 Table 7 Levels for short term water absorption by partial immersion 16 Table 8 Levels for long term water absorption by partial immersion 16 Table 9 Test methods, specimens and conditions 18 Table A.1 Values for k for one si

23、de 90 % tolerance interval with a confidence level of 90 % . 23 Table B.1 Minimum number of tests for !PTD“ and minimum product testing frequencies . 24 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics (1 of 2) . 26 Table C.1 Test times for product thicknesses .

24、 30 EN 13166:2012+A1:2015 (E) 3 Table C.2 Increments to be added to accelerated aged values of thermal conductivity to obtain the time averaged value over 25 years (W/m.K) . 31 Table D.1 Test methods, test specimens, conditions and minimum testing frequencies . 33 Table ZA.1 Relevant clauses for fac

25、tory made phenolic foam and intended use . 37 Table ZA.2 Systems of AVCP . 38 Table ZA.3.1 Assignment of AVCP tasks for factory made phenolic foam products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 39 Table ZA.3.2 Assignment of AVCP tasks for factory made phenolic foam prod

26、ucts under system 3 (see Table ZA.2). 40 Table ZA.3.3 Assignment of AVCP tasks for factory made phenolic foam products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) 41 Figures Figure ZA.1 Example CE marking information . 44 BS EN 13166:2012+A1:2015EN 13166:2012+A1:2015 (

27、E)EN 13166:2012+A1:2015 (E) 4 Foreword This document (EN 13166:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulation materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by pub

28、lication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELE

29、C shall not be held responsible for identifying any or all such patent rights. This standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Constructi

30、on Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ This document supersedes !EN 13166:2012“. This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is indicated in the text by

31、 tags !“. Compared with EN 13166:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes on some editorial and technical c

32、ontent. This includes the limiting of the use of the slicing method for ageing in Annex C to unfaced and open-faced products and the clearer definition of how the ageing techniques should be applied to various types of PF products; d) addition of links to EN 15715, Thermal insulation products Instru

33、ctions for mounting and fixing for reaction to fire testing Factory made products; e) changes to the Annex ZA. !Amendment 1 modifies EN 13166:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). T

34、his amendment introduces f) an addition to the foreword; g) replacement and additions in 3.2; h) a new subclause 4.3.11; i) modification of Clause 7; j) modification of Clause 8; BS EN 13166:2012+A1:2015EN 13166:2012+A1:2015 (E)EN 13166:2012+A1:2015 (E) 4 Foreword This document (EN 13166:2012+A1:201

35、5) has been prepared by Technical Committee CEN/TC 88 “Thermal insulation materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2

36、015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rig

37、hts. This standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integr

38、al part of this standard.“ This document supersedes !EN 13166:2012“. This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Compared with EN 13166:2008, the main changes are: a) better har

39、monisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes on some editorial and technical content. This includes the limiting of the use of the slicing method for ag

40、eing in Annex C to unfaced and open-faced products and the clearer definition of how the ageing techniques should be applied to various types of PF products; d) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made p

41、roducts; e) changes to the Annex ZA. !Amendment 1 modifies EN 13166:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) replacement an

42、d additions in 3.2; h) a new subclause 4.3.11; i) modification of Clause 7; j) modification of Clause 8; EN 13166:2012+A1:2015 (E) 5 k) modification of Annex B; l) modification of Table D.1; m) a new Annex ZA.“ This standard is one of a series of standards for thermal insulation products used in bui

43、ldings, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for the specif

44、ications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS)

45、 products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation products f

46、or buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal ins

47、ulation products for buildings Factory made expanded perlite board (EPB products) Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Spe

48、cification The reduction in energy used and emissions produced during the installed life of thermal insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN-CENELEC Internal Regulations, the national standards organizati

49、ons of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13166:2012+A1:2015EN