EN 12774-1999 en Footwear - Test Methods for Outsoles - Determination of Split Tear Strength and Delamination Resistance《鞋类 鞋底试验方法 裂口撕裂强度和抗分层阻力的测定》.pdf

《EN 12774-1999 en Footwear - Test Methods for Outsoles - Determination of Split Tear Strength and Delamination Resistance《鞋类 鞋底试验方法 裂口撕裂强度和抗分层阻力的测定》.pdf》由会员分享，可在线阅读，更多相关《EN 12774-1999 en Footwear - Test Methods for Outsoles - Determination of Split Tear Strength and Delamination Resistance《鞋类 鞋底试验方法 裂口撕裂强度和抗分层阻力的测定》.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、- - STD-BSI BS EN 12774-ENGL 2000 I 1624hh9 0835221 070 D BRITISH STANDARD Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance The European Standard EN 127741999 has the status of a British standard ICs 61.060 NO COPYING WITHOUT BSI PERMISSION EXCE

2、PT AS PERMITTED BY COPYRIGHT LAW BS EN 12 774:ZOOO STD-BSI BS EN L277Y-ENCL 2000 M Lb24bb9 0835222 TO7 = direction of the Sector AmdNo. Committee for Materiais and Chemicals, was published under the authority of the Standards Commitee and comes into effect on 15 March ZOO0 Q BI 03-2000 BS EN 1277420

3、00 Date Comments National foreword This British Standard is the official English language version of EN 127741999. The UK participation in its preparation was entrusted to Technical Committee TCY69, Footwear and leather, which has the responsibility to: - aid enquirers to understand the te% - presen

4、t to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; - monitor related international and European developments and promulgate them in the UK A list of organizations represented on this committee can be obtained on r

5、equest to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entited “Internationai Standards Correspondence Index“, or by using the “Find“ facility of

6、 the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a confxact. Users of British Standards are responsible for their correct application Compliance with a British Standard does not of itself confer immunity from legal obligations. S

7、ummary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright notice displayed in this document indie when the document WaSlaStiSSUed. ISBN O 580 34008 2 STDmBSI BS EN 12774-ENGL 2000 I Lb24hh9

8、0835223 943 EUROPEAN STANDARD EN 12774 NORME EUROPENNE EUROPASCHE NORM December 1999 ICs 61 .O60 English version Footwear - lest methods for outsoles - Determination of split tear strength and delamination resistance Chaussures - Mthodes dessai applicables aux semelles dusure - Dtemination de la for

9、ce de dchinire sur refente et rsistance au dlaminage Schuhe - Prfverfahren fr Laufsohlen -Bestimmung von Spaltreifestigkeit und Schichtentrennwiderstand This European Standard was approved by CEN on 23 October 1999. CEN members are bound to comply with the CENEENELEC Internal Regulations which stipu

10、late the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning sich national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard ex

11、ists in three oficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notifed to the Central Secretariat has the same status as tie oficial versions. CEN members are the national standards bodi

12、es of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMIITEE FOR STANDARDIZATION COMIT EUROPEEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG

13、Central Secretariat: rue de Stasoart, 36 6-1050 Brussels Q 1999 CEN All rights of exploitation in any form and by any means resewed worldwide for CEN national Members. Ref. No. EN 12774:1999 E STDmBSI BS EN 12774-ENGL 2000 = 1b24bb9 0835221i 88T Page 2 EN 12774:1999 Contents Page Foreword . 3 1 Scop

14、e 4 2 Normative references . 4 3 Terms and definitions . 4 4 Apparatus and material . _ 4 5 Sampling and conditioning . 5 6 Test method . 5 7 Expression of results 5 8 Test report 6 Bibliography 8 STD.BSI BS EN 12774-ENGL 2000 = lb24669 0835225 7Lb m Page 3 EN 12774: 1 999 Foreword This European Sta

15、ndard has been prepared by Technical Committee CEN/TC 309, Footwear, the Secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2000, and conflicting national

16、standards shall be withdrawn at the latest by June 2000. According to the CENICENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Icel

17、and, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. O BSI 03-2000 - STD-BSI BS EN 1277q-ENGL 2000 Lb24bb9 063522b b52 = Page 4 EN 12774:1999 I Scope This European Standard specifies a method for the determination of the split tear streng

18、th and delamination resistance for outsoles. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated r

19、eferences, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 10002-2 Metallic materials - Tensile testing - Par

20、t 2: Verkation of the force measuring system of the tensile testing machines. EN 12222 Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear. prEN 13400:1998 Footwear - Sampling location of components for footwear 3 Terms and definitions For the purpose

21、s of this standard the following definitions apply. 3.1 delamination resistance the median force required to propagate delamination of the adhesive layer or joint interface if a multilayer outsole is composed of an adhesive layer, divided by the width of the test pieces 3.2 split tear strength the m

22、edian force required to propagate a cut in a test piece by tearing into the adhesive layer 4 Apparatus and material The following apparatus and material shall be used. Q BSI 03-2000 STD-BSI BS EN 12774-ENGL 2000 Lb24bb9 0835227 599 1111 Page 5 EN 12774: 1999 4.1 Tensile-testing machine The tensile-t

23、esting machine shall comply with the requirements of EN 10002-2, to an accuracy corresponding to grade B, with a constant rate of traverse of 100 mm/min f 10 mm/min. A iow- inertia machine having autographic force recording facilities is essential. 4.2 A splitting jig and knife to use for making the

24、 initial cuts (see figure 1). 5 Sampling and conditioning Test specimens shall be strips of 75 mm minimum length and 25 mm f 0,2 mm width. The test pieces to be tested shall be taken in accordance with prEN 13400: 1998. All test pieces shall be conditioned in accordance with EN 12222 before testing,

25、 for a minimum of 24 h. As a minimum three pieces are necessary. 6 Testmethod Using the splitting jig and knife (see 4.2), split one end of each test piece half-way between the top and bottom surfaces for a distance of approximately 15 mm. In cases of multilayer outsoles separate the layers of the s

26、ole for a length of IO mm, inserting a heated knife in the adhesive layer. Fold back the two tongues at one end of the test piece and insert and clamp one in each jaw of the machine. Start the machine so that the jaws separate at 100 mndmin, and record a trace of the force as the test continues. 7 E

27、xpression of results The delamination resistance Ds expressed in newtons per millimetre of width is given by the formula: Ds = F/d where F d is the average force in newtons; is the width of the test piece in millimetres. The results will be the average of the three values obtained. CI BSI 03-2000 ST

28、D-BSI BS EN 12774-ENGL 2000 E Lb24bb9 0835228 425 E Page 6 EN 12774: 1 999 8 Testreport The test report shall include the following information: a) results, expressed in accordance with clause 7; b) full identification of the samples tested including styles codes, colours, nature, etc.; c) reference

29、 to this method of test; d) date of testing; e) details of any deviation from this standard test procedure. A test piece B straight-edged cutting blade C D guide rails for blade B to produce the correct depth of cut hand held guard which keeps the test piece stationary during cutting Figure I - Exam

30、ple of knife and splitting jig Q BSI 03-2000 STDmBSI BS EN L2774-ENGL 2000 = Lb24bb9 0835227 3bL Page 7 EN 12774:1999 1 Delamination force, in N 2 Average 3 Deformation Figure 2 - Example of diagram forceldeformation Q BSI 03-2000 STDmBSI BS EN 12774-ENGL 2000 1624bb 0835230 O83 m Page 8 EN 12774:19

31、99 Bibliography EN 344 Requirements and test methods for safety, protective and occupational footwear for professional use. Q BSI 03-2000 BS EN 127742000 BSI 389 Chiswick High Road London w4 4AL BSI - British Standards Institution BSI is the independent nationai body responsible for preparing Britis

32、h Standards. It wesents the UK view on standards in Europe and at the international level. It is uicorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards ghould make sure that they possess the latest amendments or editions. t is the

33、constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone hdmg an inaccv or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel 0

34、20 8996 90oO. Fax: 020 8996 7400. BSI offeis members an individuai updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for ali BSI, international and foreign standards publications should be addressed to Customer

35、 Services. Tel O20 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of infomation

36、on donai, European and intemational standards through its Library and its Technical Help to Exporters Service. Various BSI electronic infomalion services are also available which give details on ali its products and services. Contact the Infonnaon Centre. Tel 020 8996 7111. Fax: 020 8996 7048. Subsc

37、ribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership A- ?on Tel 020 89!36 7002. Fax: 020 8996 7001. Copyright Copynght subsists in ali BSI publications. B

38、SI ais0 holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopy

39、ing, recording or otherwise - without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel O20 8996 7070.