EN 12309-6-2014 en Gas-fired sorption appliances for heating and or cooling with a net heat input not exceeding 70 kW - Part 6 Calculation of seasonal performances《用于加热和 或冷却的气体的吸附装.pdf

《EN 12309-6-2014 en Gas-fired sorption appliances for heating and or cooling with a net heat input not exceeding 70 kW - Part 6 Calculation of seasonal performances《用于加热和 或冷却的气体的吸附装.pdf》由会员分享，可在线阅读，更多相关《EN 12309-6-2014 en Gas-fired sorption appliances for heating and or cooling with a net heat input not exceeding 70 kW - Part 6 Calculation of seasonal performances《用于加热和 或冷却的气体的吸附装.pdf（56页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 12309-6:2014Gas-fired sorption appliancesfor heating and/or cooling witha net heat input not exceeding70 kWPart 6: Calculation of seasonalperformancesBS EN 12309-6:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12309-6:2014.T

2、ogether with BS EN 12309-1:2014, BS EN 12309-3:2014, BS EN 12309-4:2014, BS EN 12309-5:2014 and BS EN 12309-7:2014, itsupersedes BS EN 12309-2:2000, which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee GSE/37, Gas fired sorption and laundering appliances.A l

3、ist of organizations represented on this committee can be obtainedon request to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards L

4、imited 2015ISBN 978 0 580 78698 3ICS 27.080; 91.140.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2015.Amendments/corrigenda issued since publicati

5、onDate Text affectedEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORM EN 12309-6 December 2014 ICS 27.080; 91.140.30 Supersedes EN 12309-2:2000English Version Gas-fired sorption appliances for heating and/or cooling with anet heat input not exceeding 70 kW - Part 6: Calculation ofseasonal performances

6、 Appareils sorption fonctionnant au gaz pour le chauffageet/ou le refroidissement de dbit calorifique sur PCI infrieurou gal 70 kW - Partie 6 : Calcul des performancessaisonnires Gasbefeuerte Sorptions-Gerte fr Heizung und/oderKhlung mit einer Nennwrmebelastung nicht ber 70 kW -Teil 6: Berechnung de

7、r saisonalen Effizienzkennzahlen This European Standard was approved by CEN on 18 October 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-da

8、te lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translationu

9、nder the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the samestatus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, Former

10、Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and UnitedKingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROP

11、EN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members. Ref. No. EN 12309-6:2014 E309- 6BS EN 12309-6:2014EN 12309-6:2014 (E) 2 Cont

12、ents Page Foreword 4 1 Scope 6 1.1 Scope of EN 12309 .6 1.2 Scope of this Part 6 to EN 12309 6 2 Normative references 7 3 Terms and definitions .7 4 Calculation methods for reference SGUE and SAEF in cooling mode .7 4.1 General 7 4.2 Part load conditions 7 4.2.1 General 7 4.2.2 Air-to-water applianc

13、es .8 4.2.3 Water-to-water and brine-to-water appliances .8 4.3 Calculation of reference SGUEc .8 4.4 Calculation of reference SAEFc .9 4.5 Calculation of reference annual cooling demand (Qrefc) . 10 4.6 Calculation of reference SAEFcon10 4.7 Procedures for the determination of GUEc / AEFc values .

14、11 5 Calculation methods for reference seasonal performance in heating mode . 11 5.1 General . 11 5.2 Part load conditions . 12 5.2.1 General . 12 5.2.2 Air-to-water appliances 13 5.2.3 Water-to-water and brine-to-water appliances 19 5.3 Calculation of reference SPERh . 27 5.4 Calculation of referen

15、ce SGUEh 27 5.5 Calculation of reference SAEFh 29 5.6 Calculation of reference annual heating demand (Qrefh) . 29 5.7 Calculation of reference SAEFhon. 30 5.8 Procedures for the determination of GUEh / AEFh values . 30 Annex A (informative) Calculation example for reference SGUEc and SAEFc 31 Annex

16、B (informative) Calculation example for reference SGUEh, SAEFh and SPERh 33 Annex C (normative) Number of hours in thermostat off mode, stand-by mode and off mode for reference SAEFc and SAEFh calculation 35 Annex D (normative) Calculation of the reference seasonal performance in heating mode for bi

17、valent appliances . 38 D.1 General . 38 D.2 Determination of auxiliary gas boiler efficiency and heating capacity . 38 D.3 Determination of GUEh and AEFh 38 D.4 Seasonal performance figures for the bivalent appliance as a whole 39 D.5 Seasonal performance figures for the sole heat pumps appliance du

18、ring active mode 41 Annex E (normative) Procedures for the determination of GUEh, AEFh and SAEFh value with multiple identical heat pumps . 43 E.1 General . 43 BS EN 12309-6:2014EN 12309-6:2014 (E) 2 Contents Page Foreword 4 1 Scope 6 1.1 Scope of EN 12309 .6 1.2 Scope of this Part 6 to EN 12309 6 2

19、 Normative references 7 3 Terms and definitions .7 4 Calculation methods for reference SGUE and SAEF in cooling mode .7 4.1 General 7 4.2 Part load conditions 7 4.2.1 General 7 4.2.2 Air-to-water appliances .8 4.2.3 Water-to-water and brine-to-water appliances .8 4.3 Calculation of reference SGUEc .

20、8 4.4 Calculation of reference SAEFc .9 4.5 Calculation of reference annual cooling demand (Qrefc) . 10 4.6 Calculation of reference SAEFcon10 4.7 Procedures for the determination of GUEc / AEFc values . 11 5 Calculation methods for reference seasonal performance in heating mode . 11 5.1 General . 1

21、1 5.2 Part load conditions . 12 5.2.1 General . 12 5.2.2 Air-to-water appliances 13 5.2.3 Water-to-water and brine-to-water appliances 19 5.3 Calculation of reference SPERh . 27 5.4 Calculation of reference SGUEh 27 5.5 Calculation of reference SAEFh 29 5.6 Calculation of reference annual heating de

22、mand (Qrefh) . 29 5.7 Calculation of reference SAEFhon. 30 5.8 Procedures for the determination of GUEh / AEFh values . 30 Annex A (informative) Calculation example for reference SGUEc and SAEFc 31 Annex B (informative) Calculation example for reference SGUEh, SAEFh and SPERh 33 Annex C (normative)

23、Number of hours in thermostat off mode, stand-by mode and off mode for reference SAEFc and SAEFh calculation 35 Annex D (normative) Calculation of the reference seasonal performance in heating mode for bivalent appliances . 38 D.1 General . 38 D.2 Determination of auxiliary gas boiler efficiency and

24、 heating capacity . 38 D.3 Determination of GUEh and AEFh 38 D.4 Seasonal performance figures for the bivalent appliance as a whole 39 D.5 Seasonal performance figures for the sole heat pumps appliance during active mode 41 Annex E (normative) Procedures for the determination of GUEh, AEFh and SAEFh

25、 value with multiple identical heat pumps . 43 E.1 General . 43 BS EN 12309-6:2014EN 12309-6:2014 (E) 3 E.2 Calculation procedure for GUEh and AEFh for fixed capacity heat pumps 43 E.3 Calculation procedure for GUEh and AEFh for variable capacity heat pumps 44 E.4 Calculation procedure for SAEFh 45

26、Annex F (informative) Table of tables for part load conditions in heating mode . 46 Annex G (normative) Calculation of seasonal space heating energy efficiency for monovalent or bivalent gas-driven sorption heat pump based heating appliances 47 Annex ZA (informative) Relationship between this Europe

27、an Standard and the requirements of Commission Regulation (EC) No 813/2013 . 49 Annex ZB (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) No 811/2013 . 50 Bibliography 51 BS EN 12309-6:2014EN 12309-6:2014 (E) 4 Foreword This document (EN 12

28、309-6:2014) has been prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fired washing and drying appliances”, the secretariat of which is held by UNI. This European Standard shall be

29、given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2015, and conflicting national standards shall be withdrawn at the latest by June 2015. This document supersede EN 12309-2:2000. Attention is drawn to the possibility that som

30、e of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and

31、 supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA and Annex ZB, which are integral parts of this document. This standard comprises the following parts under the general title, Gas-fired sorption appliances for heating and/or cooling

32、with a net heat input not exceeding 70 kW: Part 1: Terms and definitions; Part 2: Safety; Part 3: Test conditions; Part 4: Test methods; Part 5: Requirements; Part 6: Calculation of seasonal performances; Part 7: Specific provisions for hybrid appliances; Part 8: Environmental aspects. EN 12309-1 an

33、d EN 12309-2 supersede EN 12309-1:1999, whereas EN 12309-1, EN 12309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 supersede EN 12309-2:2000. EN 12309-1, EN 12309-2, EN 12309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 have been prepared to address the essential requirements of the

34、 European Directive 2009/142/EC relating to appliances burning gaseous fuels (see Annex ZA of prEN 12309-2:2013 for safety aspects and Annex ZA of EN 12309-5:2014 for rational use of energy aspects). These documents are linked to the Energy Related Products Directive (2009/125/EC) in terms of tests

35、conditions, tests methods and seasonal performances calculation methods under Mandate M/495 (see EN 12309-3:2014, Annex ZA; EN 12309-4:2014, Annex ZA; EN 12309-6:2014, Annex ZA and EN 12309-7:2014, Annex ZA and prEN 12309-2:2013, Annex ZB and EN 12309-5:2014, Annex ZB). These documents will be revie

36、wed whenever new mandates could apply. BS EN 12309-6:2014EN 12309-6:2014 (E) 4 Foreword This document (EN 12309-6:2014) has been prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fir

37、ed washing and drying appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2015, and conflicting national standards shall be withdrawn at the

38、latest by June 2015. This document supersede EN 12309-2:2000. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been p

39、repared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA and Annex ZB, which are integral parts of this document. This standard comp

40、rises the following parts under the general title, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW: Part 1: Terms and definitions; Part 2: Safety; Part 3: Test conditions; Part 4: Test methods; Part 5: Requirements; Part 6: Calculation of seasonal p

41、erformances; Part 7: Specific provisions for hybrid appliances; Part 8: Environmental aspects. EN 12309-1 and EN 12309-2 supersede EN 12309-1:1999, whereas EN 12309-1, EN 12309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 supersede EN 12309-2:2000. EN 12309-1, EN 12309-2, EN 12309-3, EN 123

42、09-4, EN 12309-5, EN 12309-6, and EN 12309-7 have been prepared to address the essential requirements of the European Directive 2009/142/EC relating to appliances burning gaseous fuels (see Annex ZA of prEN 12309-2:2013 for safety aspects and Annex ZA of EN 12309-5:2014 for rational use of energy as

43、pects). These documents are linked to the Energy Related Products Directive (2009/125/EC) in terms of tests conditions, tests methods and seasonal performances calculation methods under Mandate M/495 (see EN 12309-3:2014, Annex ZA; EN 12309-4:2014, Annex ZA; EN 12309-6:2014, Annex ZA and EN 12309-7:

44、2014, Annex ZA and prEN 12309-2:2013, Annex ZB and EN 12309-5:2014, Annex ZB). These documents will be reviewed whenever new mandates could apply. BS EN 12309-6:2014EN 12309-6:2014 (E) 5 EN 12309-8 (“Environmental aspects”) deals with the incorporation of the Resolution BT 27/2008 regarding CEN appr

45、oach on addressing environmental issues in product and service standards. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Den

46、mark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12309-6

47、:2014EN 12309-6:2014 (E) 6 1 Scope 1.1 Scope of EN 12309 Appliances covered by this standard include one or a combination of the following: gas-fired sorption chiller; gas-fired sorption chiller/heater; gas-fired sorption heat pump. This European Standard applies to appliances designed to be used fo

48、r space heating or cooling or refrigeration with or without heat recovery. This European Standard applies to appliances having flue gas systems of type B and type C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only a

49、pplies to appliances having: integral burners under the control of fully automatic burner control systems, closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated, mechanical means to assist transportation of the combustion air and/or the flue gas. The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309-1:2014). In the case of packaged units (consisting of several parts), this