EN 10334-2005 en Steel for packaging - Flat steel products intended for use in contact with foodstuffs products and beverages for human and animal consumption - Non-coated steel (b.pdf

《EN 10334-2005 en Steel for packaging - Flat steel products intended for use in contact with foodstuffs products and beverages for human and animal consumption - Non-coated steel (b.pdf》由会员分享，可在线阅读，更多相关《EN 10334-2005 en Steel for packaging - Flat steel products intended for use in contact with foodstuffs products and beverages for human and animal consumption - Non-coated steel (b.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 10334:2005 Steel for packaging Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption Non-coated steel (blackplate) The European Standard EN 10334:2005 has the status of a British Standard ICS 67.250 BS EN 10334

2、:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 16 May 2005 BSI 16 May 2005 ISBN 0 580 45950 0 National foreword This British Standard is the official English language version of EN 10334:2005. The UK participation in its preparation wa

3、s entrusted to Technical Committee ISE/29, Tinplate and blackplate, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referr

4、ed to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisi

5、ons of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, o

6、r proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. Th

7、e BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN10334 April2005 ICS67.250 Englishversion SteelforpackagingFlatsteelproductsintendedforusein contac

8、twithfoodstuffs,productsandbeveragesforhumanand animalconsumptionNoncoatedsteel(blackplate) AcierpouremballageProduitsplatsenacierdestin entreraucontactdesdenres,produitsetboissonspour lalimentationdelhommeetdesanimauxAciernon revtu(fernoir) VerpackungsblechFlacherzeugnisseausStahlfrdie Verwendungin

9、BerhrungmitLebensmitteln,Produkten undGetrnkenfrdenmenschlichenundtierischen VerzehrUnbeschichteterStahl(Feinstblech) ThisEuropeanStandardwasapprovedbyCENon7March2005. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusof

10、anationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation und

11、ertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxe

12、mbourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2005CEN Allrightsofexploitationinanyformandbyanymea

13、nsreserved worldwideforCENnationalMembers. Ref.No.EN10334:2005:EEN 10334:2005 (E) 2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Terms and definitions.4 4 Information to be provided by the purchaser .5 5 Dimensions and dimensional tolerances5 6 Requirements 5 6.1 Steel-making proc

14、ess .5 6.2 Chemical composition5 6.3 Oiling6 7 Checks .7 8 Sampling7 9 Test method.7 10 Designation .7 11 Marking, labelling and packaging7 Bibliography.8 EN 10334:2005 (E) 3 Foreword This document (EN 10334:2005) has been prepared by Technical Committee ECISS/TC 26 “Tinmill products - Qualities, di

15、mensions, tolerances and specific tests”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2005, and conflicting national standards shall be withdra

16、wn at the latest by October 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, I

17、celand, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 10334:2005 (E) 4 1 Scope This document specifies the maximum content for alloying and residual elements (see Table 1) present in

18、steel (usually called blackplate) used in the manufacture of packaging and packaging components or for coated steel which, as a finished product, are intended for use in direct contact with foodstuffs, products and beverages for human and pet food. For such use blackplate is normally coated but can

19、be used uncoated for some fatty or dry products. The main examples of use are: tinplate and electrolytic chromium/chromium oxide coated steel for the manufacture of food and beverage cans ; cans for conditioning foodstuffs (sugar, tea, cake, chocolate, pasta, etc.) ; non-mineral oil drums, kegs, bar

20、rels. The choice of material should be appropriate for the conditions of use. This standard applies to cold-rolled strips in the form a coil or sheets. This standard does not apply to categories of steel other than steel for packaging intended for use in contact with foodstuffs, products or beverage

21、s for human or animal consumption. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)

22、applies. EN 10204, Metallic products - Types of inspection documents EN 10205:1991, Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel EN ISO 14284, Steel and iron - Sampling and preparation of samples for the determination of che

23、mical composition (ISO 14284:1996) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 blackplate low-carbon mild steel which has been subjected to cold reduction, is used mainly in the manufacture of tinplate and electrolytic chromium/chromium o

24、xide coated steel and has a minimum iron content greater than 95% by mass 3.2 steel intended for use in contact with foodstuffs steel which under its normal or foreseeable conditions of use, does not transfer its constituents to foodstuffs in quantities which could endanger human or animal health or

25、 which could bring about an unacceptable change in the foodstuffs or a deterioration in their organoleptic properties EN 10334:2005 (E) 5 3.3 steel for packaging non alloyed steel flat product intended for manufacturing cans and other packaging components for drinks or food products. According to th

26、e applications considered, this steel can be covered with a metal coating or with an additional organic coating 3.4 steel for other applications than packaging non alloyed steel flat product or stainless steel that is not intended for the manufacture of cans and other packaging components for drinks

27、 or food products. However, it can be used for the manufacture of articles intended to come into contact with foodstuffs 4 Information to be provided by the purchaser The information to be provided by the purchaser at the time of enquiry and order shall satisfy the requirements of Clause 5 of EN 102

28、05:1991. NOTE Furthermore, the purchaser can specify the type of oil suitable for food contact to be used when the product is delivered oiled. 5 Dimensions and dimensional tolerances The nominal dimensions shall be agreed at the time of enquiry and order. Dimensional tolerances shall meet the requir

29、ements of Clause 9 of EN 10205:1991. 6 Requirements 6.1 Steel-making process The steel-making process which meets the requirements of this standard shall be left to the choice of the manufacturer. NOTE The continuous cast process is recommended. 6.2 Chemical composition The chemical composition of s

30、teel shall comply with the Table 1. EN 10334:2005 (E) 6 Table 1 Chemical composition a, bSpecified elements Max. Content in % (of mass) Al Aluminium 1,0 As Arsenic 0,030 B Boron 0,05 C Carbon 0,30 Cd + Pb + Hg b0,0100 Cd Cadmium b0,0100 Pb Lead b0,0100 Hg Mercury b0,005 Cr Chromium 0,50 Cu Copper 0,

31、40 Mn Manganese 2,50 Mo Molybdenum 0,10 N Nitrogen 0,10 Nb Niobium 0,10 Ni Nickel 0,30 P Phosphorus 0,10 S Sulphur 0,050 Si Silicon 1,0 Sn Tin 0,10 Ti Titanium 0,30 V Vanadium 0,10 W Tungsten 0,10 Zr Zirconium 0,050 Other elements measured individually a0,050 aThe chemical elements contained within

32、the section “other elements measured individually” are those that can appear in a very small quantity but are not added deliberately during the steel making process bThe elements Cd, Pb and Hg are not added deliberately during the steel making process. The specification relating to the amount of the

33、se 3 elements makes reference to Directive 94/62/EC see point 3 6.3 Oiling Unless otherwise specified at the time of enquiry and order, the products shall be delivered covered with oil suitable for use in contact with foodstuffs. NOTE Where blackplate is used in a process (e.g. conversion to tinplat

34、e or electrolytic chromium/chromium oxide coated steel) which involves rigorous pre-cleaning of the blackplate surface this requirement may not be necessary. EN 10334:2005 (E) 7 7 Checks At the request of the purchaser, conformity to the order requirements shall be proven, in accordance with this st

35、andard. Unless otherwise specified, the inspection document 2.1 is applicable, in accordance with EN 10204. 8 Sampling The sampling process and the preparation of the sample shall be in accordance with the requirements of EN ISO 14284. 9 Test method Unless otherwise agreed at the time of enquiry and

36、 the order, the choice of physical or chemical analytical method shall be at the discretion of the manufacturer. In cases of dispute, the analysis shall be conducted by a laboratory which has been approved by both parties. In such cases, an agreement shall be drawn up relating to the analytical meth

37、od to be used and, if possible, reference shall be made to the relevant European standards or appropriate EURONORMS. 10 Designation The designation shall be in accordance with Clause 5 of EN 10205:1991. 11 Marking, labelling and packaging Each coil or bundle shall have a label indicating the referen

38、ce to this standard, the name and trademark of the manufacturer and the batch identification. The packaging specifications shall be agreed at the time of enquiry and order. EN 10334:2005 (E) 8 Bibliography 1 Council Directive 89/109/EEC of 21 December 1988 on materials and articles intended to come

39、into contact with foodstuffs 2 Directive 94/62/EC of the European Parliament and Council of 20 December 1994 on packaging and packaging waste. 3 Council of Europe: Guidelines on metals and alloys intended to come into contact with foodstuffs. 4 EN 10079, Definition of steel products blankBS EN 10334

40、:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Sta

41、ndards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while usi

42、ng this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers a

43、utomatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI webs

44、ite at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and

45、international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: info

46、bsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.

47、 Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the

48、 publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such