EN 10300-2005 en Steel tubes and fittings for onshore and offshore Pipelines - Bituminous hot applied materials for external coating《近岸和海上管道用钢管和配件 外涂层用沥青热涂覆材料》.pdf

《EN 10300-2005 en Steel tubes and fittings for onshore and offshore Pipelines - Bituminous hot applied materials for external coating《近岸和海上管道用钢管和配件 外涂层用沥青热涂覆材料》.pdf》由会员分享，可在线阅读，更多相关《EN 10300-2005 en Steel tubes and fittings for onshore and offshore Pipelines - Bituminous hot applied materials for external coating《近岸和海上管道用钢管和配件 外涂层用沥青热涂覆材料》.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 10300:2005Steel tubes and fittings for onshore and offshore pipelines Bituminous hot applied materials for external coatingThe European Standard EN 10300:2005 has the status of a British StandardICS 23.040.99; 25.220.60; 75.180.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g5

2、6g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 10300:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 December 2006 BSI 2006I

3、SBN 0 580 49877 8National forewordThis British Standard was published by BSI. It is the UK implementation of EN 10300:2005. It supersedes BS 4147:1980 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee ISE/16, Protective coatings and linings of metal pip

4、es and fittings, to Subcommittee ISE/16/-/11, External coatings for steel tubes and fittings.A list of organizations represented on ISE/16/-/11 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible f

5、or its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 10300November 2005ICS 23.040.99; 25.220.60; 75.180.10English VersionSteel tubes and f

6、ittings for onshore and offshore pipelines -Bituminous hot applied materials for external coatingTubes en acier et raccords pour canalisations enterres etimmerges - Revtements externes au moyen dematriaux hydrocarbonsStahlrohre und -formstcke fr erd- und wasserverlegteRohrleitungen - Werksumhllungen

7、 aus heiaufgebrachtem BitumenThis European Standard was approved by CEN on 25 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date list

8、s and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsib

9、ility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Ita

10、ly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2

11、005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10300:2005: EEN 10300:2005 (E) 2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Terms and definitions.5 4 Composition of the coating6 5 Method of application .11 6

12、Inspection and testing 14 7 Repairs.15 8 Marking 15 9 Handling, transport and storage16 Annex A (normative) Preparation of steel surfaces for the tests given in Annexes D, E, F and G.17 Annex B (normative) Priming of steel surfaces for the tests given in Annexes D, E, F and G .18 Annex C (normative)

13、 Application of coating material for the tests given in Annexes D, E, F and G19 Annex D (normative) Sag test 20 Annex E (normative) Impact test .21 Annex F (normative) Peel test23 Annex G (normative) Bend test .26 Annex H (normative) Determination of volatile matter Percent loss of mass27 Annex I (n

14、ormative) Cathodic disbonding test.28 Annex J (informative) Guidelines for the use of coating materials.32 Annex K (normative) Determination of filler content by ignition 35 Annex L (normative) Determination of density at 25 C.36 Annex M (normative) Determination of mass per area and loss of mass on

15、 ignition38 Annex N (normative) Glass fabric Tensile strength.40 Annex O (normative) Determination of porosity 42 Annex P (normative) Use of hot applied bitumen tapes for coating steel components43 Annex Q (informative) Recommended minimum quality control requirements for bituminous enamel pipeline

16、coatings.45 Annex R (normative) Holiday detection test.46 Annex S (normative) Field bond test.47 Annex T (normative) Inspection of coating thickness .49 Annex U (informative) Information to be supplied at the time of ordering.50 Bibliography.51 EN 10300:2005 (E) 3 Foreword This document (EN 10300:20

17、05) has been prepared by Technical Committee ECISS/TC 29 “Steel tubes and fittings for steel tubes”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 20

18、06, and conflicting national standards shall be withdrawn at the latest by May 2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Es

19、tonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 10300:2005 (E) 4 1 Scope This European Standard specifies requirements for the

20、 application of factory applied external bitumen based hot applied coatings for the corrosion protection of steel tubes and fittings for onshore and offshore pipelines. This specification covers the use of bitumen based enamel when the design temperature of the pipeline is within the following limit

21、s: oxidized bitumen 15 C to + 75 C; modified bitumen 30 C to + 90 C. The coatings described in this European Standard can be applied to longitudinally or spirally welded tubes or to seamless tubes and fittings used for the construction of pipelines for the conveyance of liquids or gases. NOTE Tubes

22、coated with bitumen based enamel may be further protected by means of cathodic protection. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest editio

23、n of the referenced document (including any amendments) applies. EN 1426, Bitumen and bituminous binders - Determination of needle penetration EN 1427, Bitumen and bituminous binders - Determination of softening point - Ring and ball method EN 1849-1, Flexible sheets for waterproofing - Determinatio

24、n of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing EN 12311-1, Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties EN ISO 2431, Paints and varnishes - Determination of flow time by use of flow cups

25、 (ISO 2431:1993, including Technical Corrigendum 1:1994) EN ISO 2592, Determination of flash and fire points - Cleveland open cup method (ISO 2592:2000) EN ISO 8501-1, Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part

26、1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:1988) EN ISO 13736, Petroleum products and other liquids - Determination of flash point - Abel closed cup method (ISO 13736:1997) ISO 719, Glass - Hydroly

27、tic resistance of glass grains at 98 C - Method of test and classification ISO 2591-1:1988, Test sieving - Part 1: Methods using test sieves of woven wire cloth and perforated metal plate ASTM D737-96, Test Method for Air Permeability of Textile Fabrics EN 10300:2005 (E) 5 3 Terms and definitions Fo

28、r the purposes of this European Standard, the following terms and definitions apply. 3.1 coater company responsible for applying the coating material to the components to be coated in accordance with the provisions of this document or the special requirements given in the tender specification and in

29、 the order 3.2 bitumen viscous liquid or a solid, consisting of hydrocarbons and their derivatives, which is soluble in carbon disulfide or trichloroethylene NOTE It is substantially non-volatile and softens gradually when heated. It is black or brown in colour and possesses waterproofing and adhesi

30、ve properties. It is obtained by refinery processes from petroleum. 3.3 oxidized bitumen bitumen which has been rheologically changed by the action of blowing air through the bitumen 3.4 modified bitumen bitumen which has been rheologically changed by the addition of polymers 3.5 bitumen based ename

31、l coating material which is substantially comprised of either oxidized bitumen and filler or modified bitumen and filler 3.6 bitumen based tapes pre-fabricated tape coating material which is substantially comprised of bitumen based enamel with a carrier 3.7 hot applied material material which is sol

32、id at ambient temperature and becomes fluid on heating to application temperature 3.8 primer material applied as a thin film to metal in order to ensure adhesion of the subsequent protective coating 3.9 non-woven glass fabric continuous sheet of randomly arranged glass fibres in an open porous struc

33、ture bonded by a suitable resin and reinforced by continuous longitudinal glass yarns 3.10 woven glass fabric regular woven glass fabric made from glass yarns held together by a binder 3.11 composite glass fabric one layer of glass fibre tissue and one layer of woven or lock welded glass mesh held t

34、ogether by a binder 3.12 composite polyester/glass fabric woven polyester glass mesh with a layer of glass fibre tissue held together by a binder EN 10300:2005 (E) 6 3.13 inner-wrap porous reinforcement of glass fibre which is buried within the bitumen based enamel coating in order to improve its me

35、chanical performance 3.14 outer-wrap continuous sheet of reinforced glass fibre fabric or glass fibre/polyester composite fabric impregnated by a suitable bitumen based material which is compatible with the bitumen based coating and fused into the outer surface to improve its mechanical performance

36、4 Composition of the coating 4.1 Description of coating A coating generally shall comprise a number of layers or components as follows: primer which shall be compatible with the chosen enamel coating; enamel comprising a bitumen based material containing a filler; reinforcing glass fabric inner-wrap

37、s as required by the category and thickness of the coating enamel; glass or composite fabric outer-wraps as required by the category of coating enamel; solar protection, i.e. weather resistant material to protect the coating from sunlight. NOTE In special cases (for example, for onshore use, due to

38、the nature of backfill material, or for offshore use) additional mechanical protection or a concrete weight coating may be applied by agreement. The type and grade of outer-wrap may be influenced by the presence or absence of the additional mechanical protection. 4.2 Constituent materials 4.2.1 Gene

39、ral All constituent materials shall be supplied with the following identification: - name of manufacturer; - date of manufacture; - batch number/letter(s); - reference to this European Standard; - type and grade of material; - expiry date (where applicable). 4.2.2 Primers 4.2.2.1 General Any primer

40、without the required identification shall be rejected and replaced with approved material. The primer shall be supplied in suitable airtight containers. The primer shall be compatible with the chosen bitumen based enamel coating. EN 10300:2005 (E) 7 4.2.2.2 Primer Type 1 Primer Type 1 for cold appli

41、cation shall consist of chlorinated rubber and plasticizer and, when required, colouring matter, together with solvents needed to give a consistency suitable for application by spray, brush or other approved method. Primer Type 1 shall conform to the requirements given in Table 1. 4.2.2.3 Primer Typ

42、e 2 Primer Type 2 for cold application shall consist of hydrocarbon resins and plasticizer and, when required, colouring matter, together with solvents needed to give a consistency suitable for application by spray, brush or other approved method. Primer Type 2 shall conform to the requirements give

43、n in Table 1. Table 1 Characteristics of synthetic primers Characteristics Primer Type 1 Primer Type 2 Method of test Flow time (Flow cup n4 at 23 C), seconds 35 to 60 35 to 60 EN ISO 2431 Flash point (Abel closed cup), minimum C 23 23 EN ISO 13736 Volatile matter, maximum % loss by mass 75 75 Annex

44、 H 4.2.2.4 Other primers Primers based on other materials (e.g. epoxy resin based aqueous primers) may be used providing that, when used in combination with the selected bitumen based enamel coating, they fulfil the performance criteria given in 4.2.4. 4.2.3 Filler The filler shall comprise a finely

45、 divided mineral powder which is not hygroscopic, not electrically conductive and is inert with respect to the other constituents of the tube coating and is resistant to attack by the medium to which it will normally be exposed. It shall be physically and chemically stable at the maximum application

46、 temperature of the coating material. NOTE Powdered slate and talc are typical examples of suitable filler types. The filler grading shall meet the following requirements: passing 90 m: not less than 93 % by mass; passing 250 m: not less than 99 % by mass; when tested using the wet sieving method in

47、 accordance with 7.3 of ISO 2591-1:1988. 4.2.4 Bitumen based coating enamels NOTE 1 Bitumen based coating materials are classified into two categories: Category 1: oxidized bitumen enamel containing filler; Category 2: modified bitumen enamel containing filler. NOTE 2 Bitumen based coating materials

48、 are further sub-divided into a number of grades according to the conditions of application and service, see Annex J. 4.2.4.1 Oxidized bitumen enamel (Category 1) Category 1 coating materials shall consist of a uniform mixture of oxidized bitumen and filler. The grading of the filler shall be as des

49、cribed in 4.2.3. EN 10300:2005 (E) 8 Category 1 coating materials shall conform to the requirements for the appropriate grade given in Table 2 when tested by the corresponding methods. Category 1 coating materials detailed in Table 2, in conjunction with an appropriate primer, shall also conform to the requirements for the appropriate grade given in Table 3 when tested by the corresponding methods. Table 2 Characteristics of Category 1 coating enamels Characteristics Grade a Grade b Grade c Method of test Filler content by igniti