ECMA317-2000 Data Interchange on 300 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity 30 Gbytes per Cartridge.pdf

《ECMA317-2000 Data Interchange on 300 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity 30 Gbytes per Cartridge.pdf》由会员分享，可在线阅读，更多相关《ECMA317-2000 Data Interchange on 300 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity 30 Gbytes per Cartridge.pdf（106页珍藏版）》请在麦多课文档分享上搜索。

1、Standard ECMA-317December 2000Standardizing Information and Communication SystemsPhone: +41 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http:/www.ecma.ch - Internet: helpdeskecma.chData Interchange on 300 mmOptical Disk Cartridges of TypeWORM (Write Once ReadMany) Using Irreversible Effects- Capacit

2、y: 30 Gbytes perCartridgeStandard ECMA-317December 2000Standardizing Information and Communication SystemsPhone: +41 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http:/www.ecma.ch - Internet: helpdeskecma.chMBLC Ecma-317.doc 24/01/01 09:43Data Interchange on 300 mmOptical Disk Cartridges of TypeWORM

3、(Write Once ReadMany) Using Irreversible Effects- Capacity: 30 Gbytes perCartridgeBrief HistoryTechnical Committee ECMA TC31 for Optical Disk Cartridges (ODCs) was set up in 1984. The Committee mademajor contributions to ISO/IEC JTC1/SC23 to the development of standards for 90 mm, 120 mm, 130 mm and

4、300 mm ODCs, and provided camera-ready copies for most International Standards for ODCs. The following ECMAStandards for WORM (Write Once Read Multiple) ODCs have been published and have been adopted by ISO/IECunder the fast-track procedure.ECMA-153 (1991) Information Interchange on 130 mm Optical D

5、isk Cartridges of the Write Once, Read Multiple(ISO/IEC 11560) (WORM) Type, using the Magneto-Optical EffectECMA-189 (1993) Information Interchange on 300 mm ODCs of the Write Once Read Multiple (WORM) Type using(ISO/IEC 13403) the SSF MethodECMA-190 (1993) Information Interchange on 300 mm ODCs of

6、the Write Once Read Multiple (WORM) Type using(ISO/IEC 13614) the CCS MethodECMA-238 (1996) Data Interchange on 130 mm Optical Disk Cartridges of Type WORM (Write Once Read Many)(ISO/IEC 15486) using Irreversible Effects - Capacity: 2,6 Gbytes per CartridgeECMA-260 (1997) Data Interchange on 356 mm

7、Optical Disk Cartridges WORM, using Phase Change Technology -ISO/IEC 15898) Capacity: 14,8 and 25 Gbytes per CartridgeECMA-279 (1998) 80 mm (1,23 Gbytes per side) and 120 mm (3,95 Gbytes per side) DVD-Recordable Disk (DVD-R)(ISO/IEC 20563)ECMA-280 (1998) Data Interchange on 130 mm Optical Disk Cartr

8、idges of Type WORM (Write Once Read Many)(ISO/IEC 18093) using Irreversible Effects - Capacity: 5,2 Gbytes per CartridgeThe present ECMA Standard specifies an ODC of Type WORM that cannot be altered (erased or over-written) withoutdetection. In order to clearly differentiate this type from type wher

9、e a microcode is used to protect againstundetectable over-writing of M.O. disks, the term irreversible effects has been introduced in the title.Adopted as an ECMA Standard by the General Assembly of 15thDecember 2000.- i -Table of contentsSection 1 General 11Scope 12 Conformance 12.1 Optical Disk Ca

10、rtridge (ODC) 12.2 Generating System 12.3 Receiving System 12.4 Compatibility statement 13 Reference 14 Definitions 14.1 case 14.2 Clamping Reference Area 24.3 Clamping Zone 24.4 Cyclic Redundancy Check (CRC) 24.5 Data Zone 24.6 defect management 24.7 Disk Reference Plane 24.8 entrance surface 24.9

11、Error Correction Code (ECC) 24.10 format 24.11 hub 24.12 interleaving 24.13 Logical Sector 24.14 Logical Block Address 24.15 mark 24.16 mark edge 24.17 mark edge recording 24.18 optical disk 24.19 optical disk cartridge (ODC) 24.20 polarization 34.21 prerecorded mark 34.22 read power 34.23 recording

12、 layer 34.24 Reed-Solomon code 34.25 space 34.26 spindle 34.27 substrate 34.28 track 34.29 track pitch 3- ii -4.30 write-inhibit hole 35 Conventions and notations 35.1 Representation of numbers 35.2 Names 36 List of acronyms 47 General description of the optical disk cartridge 48 General requirement

13、s 48.1 Environments 48.1.1 Test environment 48.1.2 Operating environment 58.1.3 Storage environment 58.1.4 Transportation 58.2 Temperature shock 58.3 Safety requirements 58.4 Flammability 59 Reference Drive 69.1 Optical system 69.2 Optical beam 69.3 Read Channel 69.4 Tracking 69.5 Rotation of the di

14、sk 6Section 2 - Mechanical and physical characteristics 810 Dimensional and physical characteristics of the case 810.1 General description of the case 810.2 Relationship of Sides A and B 810.3 Reference axes of the case 810.4 Case drawings 810.5 Dimensions of the case 810.5.1 Overall dimensions 810.

15、5.2 Locator slots 910.5.3 Side A / B indicator holes 910.5.4 Side A / B indicator labels 1010.5.5 Insertion slots and detent features 1010.5.6 Gripper slots and gripper notches 1110.5.7 Write-inhibit hole 1210.5.8 Hub aperture and head window 1210.5.9 Shutters 1210.5.10 Shutter opener features 1210.

16、5.11 User label areas 1310.5.12 Bar code area 1310.6 Mechanical characteristics 13- iii -10.6.1 Materials 1310.6.2 Mass 1310.6.3 Edge distortion 1310.6.4 Compliance 1310.6.5 Shutter opening force 1310.7 Drop test 1411 Dimensional, mechanical and physical characteristics of the disk 1411.1 General de

17、scription of the disk 1411.2 Reference axis and plane of the disk 1411.3 Dimensions of the disk 1411.3.1 Hub dimension 1411.4 Mechanical characteristics 1611.4.1 Material 1611.4.2 Mass 1611.4.3 Moment of inertia 1611.4.4 Imbalance 1611.4.5 Axial deflection 1611.4.6 Axial acceleration 1611.4.7 Radial

18、 runout 1711.4.8 Radial acceleration 1711.4.9 Tilt 1711.5 Optical characteristics 1711.5.1 Index of refraction 1711.5.2 Thickness 1711.5.3 Birefringence 1711.5.4 Reflectance 1812 Interface between cartridge and drive 1812.1 Clamping method 1812.2 Clamping force 1812.3 Capture cylinder 1812.4 Disk po

19、sition in the operating condition 18Section 3 - Format of information 3513 General description 3514 Track format 3514.1 Track definition 3514.2 Direction of track spiral 3514.3 Track pitch 3514.4 Track numbering 3514.5 Track layout 3514.6 Segment format 3514.7 Servo Field format 3514.8 Address forma

20、t 37- iv -14.9 Recordable Field format 3715 Zone organization 3815.1 Logical Sector format 3815.2 CRC and ECC bytes 3915.3 User Area - Format of Data Zones 3915.3.1 Detailed format of Data Zones 4016 Recording code 4016.1 Termination Field 4116.2 Data recording method for the RLL(1,7) Code 4117 Defe

21、ct Management 4117.1 Defective Sectors recorded in the SDI 4117.2 Reading and writing Procedure 4117.3 Format of the Relocation Area 4117.4 Format of the Dynamic Relocation Maps Sectors 4118 Prerecorded Information 4218.1 Prerecorded Information definition 4218.2 Reserved regions 4218.3 Specific Dis

22、k Information (SDI) 4218.3.1 SDI Sector allocation 4218.3.2 SDI content 4318.4 Read Focus Optimization (RFO) Tracks 43Section 4 - Characteristics of Prerecorded Information 4419 Method of testing 4419.1 Environment 4419.2 Use of the Reference Drive 4419.2.1 Optics and mechanics 4519.2.2 Read power 4

23、519.2.3 Read channel 4519.2.4 Tracking 4519.3 Definition of signals 4520 Prerecorded Information signal requirements 4620.1 Modulation Depth of preformatted marks 4620.2 Ratio of minimum and maximum Clock Mark signal amplitude with open trackingloop 4620.3 Clock Mark jitter 4620.4 Relative tangentia

24、l displacement of preformatted marks 4620.5 Variation of QWT Marks signal amplitude 4620.6 Track pitch 4620.7 Radial runout 4620.8 Radial accelerations 4720.9 Tracking Gain 47- v -Section 5 - Characteristics of the recording layer 4721 Method of testing 4721.1 Test Regions 4721.2 Environment 4721.3

25、Use of the Reference Drive 4721.3.1 Optics and mechanics 4721.3.2 Read power 4721.3.3 Read Channel 4821.3.4 Tracking 4821.4 Write conditions 4821.4.1 Write pulse 4821.4.2 Nominal Write Power Pwnom4821.4.3 Nominal Write Power Pwnomdetermination 4821.4.4 Writing Power boosts and droops 4821.4.5 Write

26、Media Profile 4922 Write characteristics 4922.1 Signal modulation 4922.2 Signal Resolution 4922.3 Write power margin 49Section 6 - Characteristics of user data 4923 Method of testing 4923.1 Environment 4923.2 Use of the Reference Drive 4923.2.1 Optics and mechanics 4923.2.2 Read power 4923.2.3 Read

27、channel 5023.2.4 Error correction 5023.2.5 Tracking 5024 Minimum quality of a Sector 5024.1 Servo Fields 5024.2 User-written data 5024.3 Pre-written data 5025 Data interchange requirements 5025.1 Tracking 5025.2 User-written and pre-written data 5025.3 Quality of disk 50Annex A Air cleanliness class

28、 100 000 51Annex B Edge distortion test 53Annex C Compliance test 55- vi -Annex D Test method for measuring the adsorbent force of the hub 59Annex E Creeping One of Four Code (COF) 61Annex F PBA, LBA formats 63Annex G Interleave, CRC, ECC 65Annex H Content of SDI Sectors 67Annex J SISIC (Selective I

29、nter Symbol Interference Cancellation) data detection 71Annex K Requirements for interchange 73Annex L Shape and sequence of write pulses for testing 75Annex M Office environment 77Annex N Derivation of the operating climatic environment 79Annex P Transportation 85Annex Q Track deviation measurement

30、 87Section 1 General1ScopeThis ECMA Standard specifies the characteristics of a 300 mm optical disk cartridge (ODC) of Type WORM(Write Once Read Many) using irreversible effects, with a capacity of 30 Gbytes. This WORM ODCs useswriting effects that are inherently irreversible. Written marks cannot b

31、e erased and attempted modifications ofthe written marks are detectable.This ECMA Standard specifies the conditions for conformance testing and the Reference Drive; the environments in which the cartridges are to be operated and stored; the mechanical, physical and dimensional characteristics of the

32、 cartridge, so as to provide mechanicalinterchange ability between data processing systems; the format of the information on the disk, both pre-written and user-written, including the physicaldisposition of the tracks and sectors, the error correction codes, the modulation methods used; the characte

33、ristics of the prerecorded information on the disk; the recording characteristics of the disk, enabling processing systems to write data onto the disk; the minimum quality of user-written data on the disk, enabling data processing systems to read data fromthe disk.This ECMA Standard provides for int

34、erchange between optical disk drives. Together with a standard forvolume and file structure it provides for full data interchange between data processing systems.2 Conformance2.1 Optical Disk Cartridge (ODC)An Optical Disk Cartridge shall be in conformance with this ECMA Standard if it meets the man

35、datoryrequirements specified herein.2.2 Generating SystemA generating system shall be in conformance with this ECMA Standard if the ODC it generates is inaccordance with 2.1.2.3 Receiving SystemA receiving system shall be in conformance with this ECMA Standard if it is able to handle an ODCaccording

36、 to 2.1.2.4 Compatibility statementA claim of conformance by a generating or receiving system with this ECMA Standard shall include astatement listing any other ECMA or International Optical Disk Cartridge standard(s) supported by thesystem for which conformance is claimed. This statement shall spec

37、ify the number of the standard(s),including, where appropriate, the ODC Type(s), or the Types of side, and whether support includes readingonly or both reading and writing.3 ReferenceECMA-287 (1999) Safety of electronic equipmentECMA-6 (1991) 7-bit coded Character Set4 DefinitionsFor the purpose of

38、this ECMA Standard, the following definitions apply.4.1 caseThe housing for an optical disk, that protects the disk and facilitates disk interchange.- 2 -4.2 Clamping Reference AreaThe area of the Clamping Zone used to define the Disk Reference Plane.4.3 Clamping ZoneThe area of the disk within whic

39、h the clamping force is applied by the clamping device.4.4 Cyclic Redundancy Check (CRC)A method for detecting errors in data.4.5 Data ZoneAn annular area within the user zone on the disk having a constant data clock frequency.4.6 defect managementA method for handling defective areas on the disk.4.

40、7 Disk Reference PlaneA plane defined by the perfectly flat annular surface of an ideal spindle onto which the Clamping ReferenceArea of the disk is clamped, and which is normal to the axis of rotation.4.8 entrance surfaceThe surface of the disk on to which the optical beam first impinges.4.9 Error

41、Correction Code (ECC)An error-detecting code designed to correct certain kinds of errors in data.4.10 formatThe arrangement or layout of information on the disk.4.11 hubThe central feature on the disk which interacts with the spindle of the disk drive to provide radial centringand the clamping force

42、.4.12 interleavingThe process of allocating the physical sequence of units of data so as to render the data more immune toburst errors.4.13 Logical SectorThe minimum addressable user data block.4.14 Logical Block AddressThe address of a block of data.4.15 markA feature of the recording layer, which

43、may take the form of a pit, or any other type or form that can besensed by the optical system. The pattern of marks represents the data on the disk.4.16 mark edgeThe transition between a region with a mark and one without a mark or vice versa, along the track.4.17 mark edge recordingA recording meth

44、od that uses a mark edge to represent a Channel bit.4.18 optical diskA disk that will accept and retain information in the form of marks in a recording layer that can be readwith an optical beam.4.19 optical disk cartridge (ODC)A device consisting of a case containing an optical disk.- 3 -4.20 polar

45、izationThe direction of polarization of an optical beam is the direction of the electric vector of the beam.4.21 prerecorded markA mark written on the recording layer during manufacturing of the disk.4.22 read powerThe read power is the optical power, incident at the entrance surface of the disk, us

46、ed when reading.4.23 recording layerA layer of the disk on, or in, which data is written during manufacture and/or use.4.24 Reed-Solomon codeAn error detection and/or correction code that is particularly suited to the correction of errors that occur inbursts or are strongly correlated.4.25 spaceThe

47、area between marks along the track.4.26 spindleThe part of the disk drive which contacts the disk and/or hub.4.27 substrateA transparent layer of the disk, provided for mechanical support of the recording layer, through which theoptical beam accesses the recording layer.4.28 trackThe path which is f

48、ollowed by the focus of the optical beam during one revolution of the disk.4.29 track pitchThe distance between the centrelines of adjacent tracks, measured in a radial direction.4.30 write-inhibit holeA hole in the case which, when detected by the drive to be open, inhibits write operation.5 Conven

49、tions and notations5.1 Representation of numbers A measured value is rounded off to the least significant digit of the corresponding specified value. Itimplies that a specified value of 1,26 with a positive tolerance of +0,01, and a negative tolerance of-0,02 allows a range of measured values from 1,235 to 1,275. Letters and digits in parentheses represent numbers in hexadecimal notation. The setting of a bit is denoted by ZERO or ONE. Numbers in binary notation and bit combinations are represented by strings of digits 0 and 1. Numbers in binary notation a