DOD A-A-53890-1989 PIPET VOLUMETRIC《测定体积的吸量管》.pdf

《DOD A-A-53890-1989 PIPET VOLUMETRIC《测定体积的吸量管》.pdf》由会员分享，可在线阅读，更多相关《DOD A-A-53890-1989 PIPET VOLUMETRIC《测定体积的吸量管》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-53870 bb 777777q OOLLL78 2 m F- 7s-0.9 A-A-53 8 9 O 7 April 1989 COMMERCIAL ITEM DESCRIPTION PIPET, VOLUMETRIC The General Services Administration has authorized the use of this commercial item description. This commercial item description covers the requirements for volumetric pipets suitable f

2、or laboratory procedures. Salient characteristics. Shall be borosilicate glass precision volumetric pipets. Pipets shall be of the following sizes: 1 milliliter (mi), 3 ml, 5 ml, 10 ml, 25 ml, and 50 ml. The pipets shall be in accordance with ASTM E969 (Standard Specification for Volumetric (Transfe

3、r Pipets) as applicable to Class A. Workmanship. The pipets shall be free from defects which detract from their appearance or impair their serviceability. Unit. Each (EA). One pipet, as specified, constitutes one unit. Contractor certification. The contractor shall certify that the product offered m

4、eets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for

5、under the provisions of the contract. Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using ineh-pound units, providing they fall within the tolerances specified using conversion tables contained in the latest revision of Feder

6、al Standard 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. The con

7、tracting officer has the option of accepting or rejecting the product. AMSC N/A FSC 6640 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. THIS DOCUMENT CONTAINS 3 PAGES. -:. Licensed by Information Handling ServicesA-A-5 3 8 9 O Regulatory requirements. Federal Food,

8、 Druq and Cosmetic Act. If the product covered by this document has been determined by the U. S. Food and Drug Administration to be under its jurisdiction, the offeror/ contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Fo

9、od, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractor/suppliers, with the requirements of all other applicable Fedexal, State, and local statutes, ordinances, and regulat

10、ions. Recovered materials. The offeror/contractor is encouraged to use recovered material in accordance with Public Law 94-580, as amended, and as implemented by Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. Preservation, packaqinq, packinq, labelinq, and markinq. Unle

11、ss otherwise specified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the supply source to the receiving activity, plus reshipment from receivi

12、ng activity, and shall conform to applicable carriers rules and regulations. Intermediate and exterior package quantities and labeling and marking shall be as specified in the contract and/or order. NOTE: The following National Stock Numbers are covered by this document: 6640-00-437-7960 PIPET, VOLU

13、METRIC, 1 ml 6640-00-437-7980 PIPET, VOLUMETRIC, 3 ml 6640-00-437-8000 PIPET, VOLUMETRIC, 5 ml 6640-00-437-9000 PIPET, VOLUMETRIC, 10 ml 6640-00-438-0000 PIPET, VOLUMETRIC, 25 ml 6640-00-438-0250 PIPET, VOLUMETRIC, 50 ml Orderinq data. (Intermediate/exterior package quantities and labeling and marki

14、ng must be specified in the contract and/or order) 2 Licensed by Information Handling ServicesA-A-53870 66 m 7797774 OOLLLBO O A-A-5389 O MILITARY INTERESTS: PREPARING ACTIVITY: BOD - MB Custodians: Army - MD Agent: Navy - MS Air Force - 03 DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS PHS FDA-MPQAS Project No. 6640-1562 Location: CID/PIPET/VOLUMETRIC/S35/16 3 Licensed by Information Handling Services