DOD A-A-51550-1986 SPLINT HAND (MASON-ALLEN)《薄金属片指针》.pdf
《DOD A-A-51550-1986 SPLINT HAND (MASON-ALLEN)《薄金属片指针》.pdf》由会员分享,可在线阅读,更多相关《DOD A-A-51550-1986 SPLINT HAND (MASON-ALLEN)《薄金属片指针》.pdf(4页珍藏版)》请在麦多课文档分享上搜索。
1、I - A-A-51550 65 7997974 OU27557 2 m =. ?. I I ! ! ! ! A-A-515 5 O 14 July 1986 COMMERCIAL ITEM DESCRIPTION SPLINT, HAND (MASON-ALLEN) The General Services-Administration has authorized the use of this commercial item description in preference to Military Specification MIL-S-36315A. This commercial
2、item description covers an aluminum hand splint of the Mason-Allen type for use in the treatment of injuries to the hand. Salient characteristics. The spint shall consist of a forearm portion rounded to conform to the convexity of the forearm and terminating in a concavity and the heel of the hand.
3、The splint shall be fabricated of Aluminum alloy 1100 Temper O in conformance with Federal Specification QQ-A-250/1. Dimensions, style and design shall be in accordance with Defense Personnel Support Center Drawing 1960. The splint shall be permanently and legibly marked with the name or registered
4、trademark of the manufacturer. Finish. . cup shaped portion, shaped to accurately fit the palmer The splint shall be given a mirror or “Aluminate“ finish. detract from its appearance OK impair its serviceabiity. As an alternate an epoxy fuidized finish is allowed. The splint shall be free from defec
5、ts which Workmanship. UnPt. - Each (EA). One splint, as specified, constitutes one unit . Reference specification. Where Federal Specification and DPSC Drawing are referenced herein, the issue of that specification or drawing in effect on the date of solicitation shall be used to determine complianc
6、e with stated requirements. AISC N/A FSC 6515 DISTRIBUTION STATEMENT A. Approved for public release: distribution is unlimited. /- . THIS DOCUMENT CONTAINS ./ PAGES. - -/ - - ! Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-51 5 5 O Quality Assu
7、rance Provisions. Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use
8、 his own or any facilities suitable for the performance of the inspection requirements specified hereinp unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification whepe suck inspections a.re deemed necessary to assure sup
9、plies and cervices conform to prescribed requirements. -o Reeorde of examinations and tests performed by or for the contractoic shall be maintained by the contractor and made available %o the Government upon the Governments request, at any time, or from time to time, during the performance of the co
10、ntract and for a period of three years after delivery of the supplies to which sneh records relate. -on. Inspection, as used herein, is defined as both examinatPr(such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by te
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DODAA515501986SPLINTHANDMASONALLEN 金属片 指针 PDF

链接地址:http://www.mydoc123.com/p-701641.html